Patterns for Lathe Work

comments (1) October 26th, 2013 in blogs

DaveRichards David Richards, contributor
thumbs up 8 users recommend


In a recent blog post I wrote a bit about drawing chess pieces and how to go from a profile to the 3D shape. Once you've got a turned shape, it might be nice to make a pattern you can use at the lathe. How do you get the pattern, though? Here's a couple of ways to do that.

Probably the easiest way to get the pattern is to anticipate the need up front. I did that for the leg for this table. I drew the pattern to use with Follow Me, on the left, and made a component of it. Then I made a copy of the component and used Make Unique to break the relationship with the original. By doing that, I keep the original profile in the In Model components library and, when I run Follow Me on the copy, I still have that profile.

Note that I've drawn the profile rather short. I did that to make it easier to see and work on the whole length. Since the sections between the beads are straight, it was a simple matter of lengthing the leg afterward.

To make the pattern to use at the lathe, I want the negative version of the profile which is easy to make. I just extend the top and bottom edges of the profile and connect them to create a face outside the profile. It's shown in light gray in this image. I rotated the profile 90° so it would more closely fit the shape of the drawing window.

From there it's a simple matter of erasing the edges on the positive side leaving me with the negative version of the pattern.

 

Now, suppose you weren't anticipating the need for the pattern before you made the turned component. All is not lost. You can pry the profile out of the turning quite easily. Draw a rectangle on the centerline of the turning as below. Make sure the rectangle is outside of the component.

Then select the face of the rectangle, right click and choose Intersect Faces>With Model. After the intersection completes, you can move the rectangle out of the turning, erase the unneeded parts and presto! You've got the profile.

 

So it's easy enough to get the pattern drawn but how do we make it usable at the lathe? Well, if you have the Pro version of SketchUp, the easiest thing to do is send the profile to LayOut and set the scale to 1:1. Make a PDF file from it and you're ready to print.

If you don't have the pro version, though, there are a couple of other options. One way would be to setup SketchUp to make a scaled print out. Although it isn't difficult to do, it isn't especially intuitive to set up. You can read about how to do print scaled drawings directly in this blog post.

An alternative method is to use a plugin called gk_Postscript_Plot which I wrote about in this blog post. Of these two options I prefer this method because it doesn't require changing the shape of the drawing window, which, if you're still using SketchUp 8 or earlier, can wreak havoc on the toolbar arrangment.

If you're into the spinny stuff, try designing your turned pieces with SketchUp and see how you get along.

Dave

 

 

 

 

 


posted in: blogs


Comments (1)

JeffB JeffB writes: Good points in this post and I really like the images you created.
Posted: 8:46 pm on October 31st

You must be logged in to post comments. Log in.

Advertise here for as little as $50. Learn how

Save up to 51% on Fine Woodworking

 

Become a Better Woodworker

About Design. Click. Build.

Learn the art and science of designing furniture in SketchUp with Fine Woodworking's official blog. Moderated by a devoted community of woodworkers, we feature step-by-step SketchUp tutorials on designing components, downloads of pre-built 3D models of furniture parts, and news and information about the evolving world of digital furniture design.

Buy the Video
Don't miss Dave Richard's brand-new DVD/video download, The Basics.

Buy the Book
Get Tim Killen's popular eBook, the Google SketchUp Guide for Woodworkers.

Basic SketchUp Tutorials 
Learn the basics of building furniture in SketchUp with these classic posts from the Design. Click. Build. blog.

Creating a Project Plan in SketchUp
How I Draw in SketchUp
Axes in SketchUp
The SketchUp Move Tool
The SketchUp Rotate Tool
The SketchUp Scale Tool

Materials, Colors, and Textures
Applying Wood Grain Skins in SketchUp

Easy Dovetail Joints in SketchUp

Digital Project Plans


Download and modify SketchUp files for select projects from Fine Woodworking. View all.

Top Sellers:
Matt's Monster Workbench
New England Pine Cupboard
Garden Bench

Meet the Authors

DaveRichards

DaveRichards

I am a Biomedical Equipment Technician. I maintain anesthesia and respiratory equipment for the largest medical facility in southeast Minnesota. I...
view profile
Killenwood

Tim Killen

I am retired from Bechtel Corporation after 36 years in Engineering and IT management. I grew up among woodworking machinery in...
view profile
FineWoodworkingEditors

FineWoodworkingEditors

...
view profile