How to Make a Simple Jig for Offset Knife Hinges
Box Making Tips and Tricks
Buying and Using Trim Routers
Router Jig for Perfectly Aligned Dadoes
Upgrade Your Jointer with a Segmented Cutterhead
Tablesaw Tapering Jig is Safer and Faster
How to Sharpen a Card Scraper
Five Minute Guide: Glue-Ups
3 Steps to Great Glue-Ups: Sliding Dovetail Joints
T-Track is a Smart Workbench Accessory
How to Cut Sliding Dovetail Joints
How to Drill Windsor Chair Mortises
How to Apply an Aerosol Finish
Five Minute Guide: How to Use a Tablesaw
Fixing Woodworking Mistakes
Dedicated Sled Delivers Perfect Finger Joints
Best Tabletop Finish

Reader's Gallery

Ash and Mahogany Trestle Table

comments (1) October 24th, 2012 in Reader's Gallery

FWW Magazine Gallery, member

1 user recommends

Add Comment
Print

Woodworker: Jeremy N. GibbsGibbs put a twist on this ash and mahogany trestle table, turning the end posts 45º so the through-mortise goes from point to point and a notched wedge incorporates the 90º corner. The table, finished with tung oil, is 28 in. deep by 60 in. wide by 29½ in. tall. From Fine Woodworking #203
Design or Plan used: Not specified

posted in: Reader's Gallery, mahogany, ash, trestle, Custom Design

Add Comment Print