Jeff Miller used wood for inlays for years until he figured out a way to tint epoxy for more intricate jobs. Splicing, cutting to length and mitering are all eliminated. Epoxy isn’t foolproof, however; there can be bubbles and voids, and the color occasionally bleeds into end grain. Miller explains how to do the job right and avoid problems. He also shares information on which brands and types have worked best for him. You’ll learn how to cut and trim the grooves, mix the epoxy and add color, and apply the epoxy with a stick. Then you watch for bubbles, and after it cures, you clean off the surface.

From Fine Woodworking #118