Mortise and Tenon Joints

Without a doubt, the mortise-and-tenon joint is used more than any other for woodwork and furniture. There are literally hundreds of variations on the basic joint, but they all work in the same way. The Basics: • By hand or machine: Chisels and handsaws
Read More

SORT BY:
  • Lock Mortises Made EasyLock Mortises Made Easy

    by Michael Pekovich

    Installing a half-mortise lock by hand is a tedious and time-consuming process. So Michael Pekovich designed a routing jig for the shallow mortises, a second routing ...

  • Powerful New Joint: Housed Double TenonsPowerful New Joint: Housed Double Tenons

    by Brian Boggs

    This strong, weather-tight joint takes care of the problem of moisture wicking into the end grain of tenon shoulders on a traditional mortise-and-tenon joint. The ...

  • How To Build Frame-and-Panel Doors by HandHow To Build Frame-and-Panel Doors by Hand

    by Andrew Hunter

    The doors on Andrew Hunter's country hutch are rock solid. The rails and stiles are joined with haunched through-tenons, which are suited to hand-tool woodworking ...

  • Drawbored TenonsDrawbored Tenons

    by Steve Latta

    Drawboring a mortise-and-tenon joint means offsetting the hole in the tenon so that the pin pulls the parts together tightly—and permanently. If your tenon shoulders ...

  • Three tenons are better than oneQ & A: Three tenons are better than one

    by Garrett Hack

  • Clear Chips as You RoutQ & A: Clear Chips as You Rout

    by Gregory Paolini

  • How to Avoid Crooked Tenon ShouldersQ & A: How to Avoid Crooked Tenon Shoulders

    by Michael Pekovich

  • Low-Tech MortisingLow-Tech Mortising

    by Tom Begnal

    The drill-and-chisel method is an approachable, accurate way for beginning woodworkers (or even experienced woodworkers) to cut mortises. It is nearly foolproof ...

  • Stretchers Add StrengthStretchers Add Strength

    by Tim Coleman

    In Strong Tenons in Skinny Legs (FWW #236), I illustrated my techniques for maximizing mortise-and-tenon joinery in narrow legs. Two cabinets featured there incorporate ...

  • Strong Tenons in Skinny LegsStrong Tenons in Skinny Legs

    by Tim Coleman

    There's a reason why the mortise-and-tenon is a go-to joint for a leg-to-apron joint—it's strong, and it resists racking. But  if your furniture designs feature ...

  • How to Cut Precise Joints on the TablesawHow to Cut Precise Joints on the Tablesaw

    by Marc Adams

    The tablesaw can do more than make rectangles. If you add a dado set and a few shopmade jigs and fixtures, it can become your favorite machine for cutting flawless ...

  • Fast Fixes for Joinery MistakesFast Fixes for Joinery Mistakes

    by Michael Pekovich, Greg Brown, Garrett Hack, Will Neptune, Thomas McKenna

    Straight from the pros, five quick and easy fixes for joinery mistakes. If you find yourself midway through a piece of furniture and find yourself with a gappy ...

  • Mortising with a RouterVideo: Mortising with a Router

    with Gregory Paolini

    Learn how to cut a clean, accurate mortise in under 60 seconds

  • 3 Steps to Great Glue-Ups: Mortise-and-TenonVideo: 3 Steps to Great Glue-Ups: Mortise-and-Tenon

    with Ed Pirnik

    Learn how to properly glue-up mortise-and-tenon joinery in part three of our six part series, 3 Steps to Great Glue-Ups

  • How to Speed Up Your Work with Spacer BlocksEditors PickHow to Speed Up Your Work with Spacer Blocks

    by Alan Turner

    Many woodworkers use stop blocks and fences to make repeat cuts accurately. Alan Turner's spacer-block techniques take that concept a step further. He shows you ...

Become a Better Woodworker

Save up to 56% on Fine Woodworking


MEMBERS ONLY