Reader's Gallery

showing 129 - 160 of 195 posts matching wood turning [X]
First < Previous 3 4 5 6 7 Next >

Sort By:

Segmented Vase

gpr, member | August 2nd, 20092 comments

Decorative segmented vase made from 204 individual pieces of wood. The primary wood used is American Beech, decorative features consist of Walnut, Maple, and Cherry. (all from...

view details

Poplar Staved Box Inside

Twopoles, member | August 2nd, 20092 comments

Poplar staved box. The box is constructed of staves made of poplar. The fennel is black wood. The dividers are of alowood of different colors the base is Santiago mahogany. The box is 14...

view details

Poplar Staved Box

Twopoles, member | August 2nd, 20091 comment

Poplar staved box. The box is constructed of staves made of poplar. The fennel is black wood. The dividers are of alowood of different colors the base is Santiago mahogany. The box is 14...

view details

Segmented Gentlemans Pen

jj9ball, member | August 1st, 20091 comment

This is a segmented pen I made from Holly, Bloodwood, and Ebony. I first made a lamination of the three woods. Then I drilled the holes for the tubes. After that I cut the...

view details

Small Urn

Blue_Rocco, member | August 1st, 2009

Walnut Urn - My own design. 8"tall x 4"dia. Three coats of wipe on poly, with steel wool rub out between coats. Turned from a walnut tree that had been standing dead for seven years. This was the...

view details

Purpleheart vessel

wooddood, member | August 1st, 20091 comment

Hollow form vessel of purpleheart, maple, and African blackwood. 6"Hx7"Diameter

view details

Mahogany vessel

wooddood, member | August 1st, 2009

Hollow form vessel of mahogany and African blackwood. 8"Hx4"Diameter

view details

Maple and blackwood vessel

wooddood, member | August 1st, 2009

Hollow form vessel of maple and African blackwood. 8"Hx6"Diameter

view details

Reliquary #1

wooddood, member | August 1st, 20091 comment

The first in a proposed series of reliquaries, elaborate vessels designed to hold small precious objects. The top lifts off to reveal a smaller interior container, also with a lid, to hold a ring or...

view details

A la Al (Stirt)

MarstonQ, member | July 31st, 20091 comment

Turned maple platter, 12 inch diameter, painted with black gesso and carved through by hand. Finished with satin spray lacquer. The design is my own and, except for the large 'petals', is all...

view details

Warped and dyed birch bowl

JPStrickler, member | July 31st, 20092 comments

Microwaved, waterbased analine dyes, end grain cracks (caused by stresses in microwave warping) filled with colored epoxy.

view details

Quilted maple and walnut pendent

woodninja, member | July 31st, 20093 comments

This pendant was made from quilted maple and walnut, jointed, glued and turned. Sanded to 1200 grit and finished with a shellac-based friction polish. Total diameter of the piece is...

view details

Spalted Maple Bowl

Sikverback, member | July 31st, 20093 comments

This bowl was turned from an ornamental maple tree which died several years ago. My neighbor and his grandson finally cut it down this spring and I managed to save some of it before it was...

view details

Official Rules: What Have You Turned Lately

FineWoodworkingEditors, member | July 30th, 20092 comments

Official rules for the "What Have You Turned Lately" gallery challenge.

view details

Sheraton Side Tables in Mahogany

Sanjeev, member | July 18th, 20093 comments

I wanted to try my hands on turning. This project was a result of that. The eight legs on these tables are the only eight pieces of wood I have ever mounted on a lathe. I also used the...

view details

Candlesticks with a twist

randycarnegie, member | July 9th, 20092 comments

a collection

view details

Turned Wine Glass Set

pmw07, member | May 27th, 2009

This set of 6 wine glasses were turned from cherry with the spiral stems carved from maple. They are rather large and stand at 17 inches tall with the stems being 12 inches. They are finished with...

view details

Segmented bowl

picapiedra, member | May 11th, 2009

Segmented bowl made with poplar and walnut.

view details

The Game of Nine Pin

TheGreenDragon, member | April 22nd, 20093 comments

The 9 pins in this game were turned from spalted Maple pallet wood. The pallets originally held transformers used in the Katrina recovery effort right after the...

view details

Federal Side Table

cbkearney, member | April 21st, 2009

Federal style side table, inspired by parts of some of the best. Mahogany with mahogany crotch veneers and figured mahagony top. Flower carvings at the top of each leg. Turned and reeded legs...

view details

Norfolk Pine/ Gabon Ebony Urn

brwoodwork, member | April 18th, 2009

approx. 14"T x 6"W x 1/8 thick. Glass like oil and wax finish

view details

A Scoop of Sweetness

flairwoodworks, member | March 26th, 2009

inspired by a scrap of maple that was half light and half dark, I turned this sugar scoop. I used the bandsaw to "open up" the scoop.

view details

Piano Bowl

lowellH, member | March 18th, 2009

I made this bowl as a special thank you for our friend who has played the piano for our church for many years. It has 385 pieces . The woods are Basswood, Wenge, Black walnut, Peruvian mahogany...

view details

Backgammon for Liz

NancyBlades, member | February 25th, 20093 comments

My first real from scratch wood working project - My niece wanted a backgammon game - I learned everything from lathe work to resawing and inlay. Loved the time spent on this.

view details

Megans container

MikeOleary, member | February 25th, 2009

3x7" container.... maple with cocobolo finial

view details

megans container.

MikeOleary, member | February 25th, 2009

Maple box with cocobolo finial....

view details

TRAIN CABINETS

SteveLevinson, member | February 23rd, 2009

Designed as working storage and display for a family of train enthusiasts. The cabinets where designed to resemble train cars. It was one of those projects that took on a life of its...

view details

Spalted Bowl

mjfister, member | February 17th, 2009

This bowl is approximately 7.5" in diameter and 3.5" deep and turned from spalted hackberry - an amazing material. I use a vacuum chuck to reverse turn the foot (away) and finish with a tung...

view details

A Bi Plane for Hayden

brownb14, member | February 4th, 2009

This project was built for my 5 year old grandson. It was constructed using maple and walnut at the Offutt AFB, NE Wood Shop. The idea came from an old plan that I revised to increase wing...

view details

Chess Table, Chairs & Chess Pieces

DennisZongker, member | February 3rd, 20099 comments

This is the first of three sets that I made. I made this set ten years ago. The other two I made seven years ago. All three sets are made out of American Black Walnut, & Hard...

view details

Hollow Form

NOC45, member | February 3rd, 2009

This hollow form is made from a group of horse chestnut burls I found on the roadside where they cut down a chestnut tree in front of an old house. It measures 9in wide x 5in tall and the...

view details

Gavel and Travel Case

BioHaz1906, member | January 27th, 2009

This is my first project ever on a lathe. This is a hand-turned gavel for a college’s student government association parliamentarian. The gavel and sounding block are made of...

view details

showing 129 - 160 of 195 posts
First < Previous 3 4 5 6 7 Next >

An application error was encountered.

Severity: Warning

Message: file_get_contents(http://custommade.com/feeds/xml/?keyword=wood&count=4&imgsize=150) [function.file-get-contents]: failed to open stream: HTTP request failed! HTTP/1.1 404 NOT FOUND

Filename: libraries/Module.php

Line Number: 1954

Array

Welcome to Fine Woodworking's Readers Gallery,
an online photo community where woodworkers like you can share photos of all your woodworking projects. Log in or register now to create your public profile, share photos, and comment on other photos.

Check out our brand-new SHOP GALLERY and JIGS GALLERY. Get inspired and then post pictures of your own work.

CURRENT GALLERY CHALLENGES:
Show Us Your Drawers