Reader's Gallery

showing 193 - 224 of 316 posts matching veneer [X]
First < Previous 5 6 7 8 9 Next > Last

Sort By:

Lonnie Bird Inspired Toolchest

Diviner, member | May 22nd, 200914 comments

This is a cabinet was inspired from a feature article and video clip in FWW about a secretary that Lonnie Bird built. This furniture style doesn't match the rest of my house, so I decided to make it...

view details

School of Hard Knots

Czappa, member | May 21st, 20093 comments

This is the "School of Hard Knots." I used the knots from several pieces of pine board to make the students. It is made of 1/4" walnut, oak and ash venners over plywood. The angeled bell toware was...

view details

Arts & Crafts Quartersawn Oak & Waterfall Bubinga Wine Bar

lundbergbros, member | May 20th, 20091 comment

My brother and I made this out of quartersawn oak and waterfall bubinga veneer over mahogany. The top holds 14 wine glasses. The center holds 25 bottles of wine. The center is a pull out tray with...

view details

untitled sculpture

jasonmcbain, member | May 17th, 2009

The woodwork on this piece is made from figured Makore veneer scraps. I was inspired to make a sculpture that evoked the idea of a chair without being functional as a chair. This was...

view details

chest on stand

jasonmcbain, member | May 17th, 20096 comments

This cabinet was made from Cherry, milled by the recipient’s deceased grandfather, with spalted, curly Maple veneered sides and doors, made from wood salvaged from a pallet. The doors...

view details

Full Dress Aaron Burr Desk

btribble, member | May 15th, 20097 comments

Table/Desk Combination from an 19th Century design, dressed up with a little inlay.

view details

Cabinet II for Sheet Music

AlanBYoung, member | May 15th, 20091 comment

Here is a Sheet Music Cabinet . Materials and constructions details: Frame:Sapele. Side Panels -Anigre veneer with Sapele diamond inlay. Drawer front and Door Panel-Maple veneer with Sapele and...

view details

Marquetry tool cabinet

kterpening, member | May 13th, 200915 comments

Ash tool cabinet with marquetry depicting the journey from live ash tree to lumber to finished tool cabinet.

view details

The Carpenter

Czappa, member | May 8th, 20091 comment

This is a sculpture about my father who taught me woodworking when I was just a kid. Many of the tools on this piece were his. His outfit is made of 13 ply hardwood plywood cut up to make the parkay...

view details

The Toaster

Czappa, member | May 8th, 2009

I thought it would be fun to make a toaster out of plywood. It does not make actual toast. Pine plywood with walnut handle and legs.

view details

Elm Credenza

locsird, member | May 1st, 20092 comments

Elm Credenza with bookmatched Burr Elm Panels in both sides of the doors. The top is hand cut dovetailed to the sides, the bottom shelf through tenoned with Rosewood wedges. The drawer fronts, made...

view details

Bubinga & Maple Credenza

SFWoodworks, member | May 1st, 20096 comments

This is from my wine cabinet series. This piece though made for the show of The Furniture Society Conference held at Victoria, BC., Canada, Frame is bubinga, door panels are maple...

view details

Federal Side Table

cbkearney, member | April 21st, 2009

Federal style side table, inspired by parts of some of the best. Mahogany with mahogany crotch veneers and figured mahagony top. Flower carvings at the top of each leg. Turned and reeded legs...

view details

Boxes With & Without, Marquetry & Carving

DennisZongker, member | April 11th, 20092 comments

This is the same style of box. One with & without carving & marquetry. The Hardwood is out of Africa Mahogany & Ebony. The marquetry is out of Maple Burl, Ebony, Bloodwood, Walnut...

view details

Cherry & Rosewood Entertainment Console

SFWoodworks, member | April 10th, 20093 comments

Hi Everybody, This was going to be a simple entertainment console. Initially, bottom shelf was going to have ventilation slots, but later on I thought I can do better than that. Doors were...

view details

Table in the Japanese style

ANDREJS, member | April 5th, 2009

Table in the Japanese style. It is made of a tree of a pine and ash-tree furnish. An ornament from silver, a varnish.

view details

Ruthie's Box

Capella, member | March 23rd, 20091 comment

This box was an exploration into the use of end grain veneers. The surfaces were approached as a composition. What I ended up with was a random “pattern” that highlights the...

view details

Jewelry Box

crookedshack, member | March 19th, 2009

Jewelry box created from bird's eye maple veneer and solid walnut sides and handle. The bottom is 1/4" birch plywood. The design is from Bill Hull. The finish is a lavender scented wax.

view details

Jewelry Box- Bent laminated lid

guth3, member | March 14th, 20096 comments

This box was made with Rosewood, Ebony, and Fiddleback Maple. It is lined with Pig Skin Suede.

view details

San Francisco Hillside

Roxiee, member | March 13th, 20091 comment

The seven drawers/boxes in aggregate are about nine inches high at the highest point, about two and one half inches at the lowest and are thirty inches wide. The box sizes vary with the...

view details

Hidden Treasure Box - Marquetry Wood Mermaid Box with Hidden Compartment

technoplastique, member | March 13th, 20092 comments

I designed the veneer pattern as vectors and had all of the pieces laser cut. The veneers used are Birdseye Maple and Bubinga. They are left unstained and finished with clear...

view details

Treasure Box for Young Boy

Pinkopalino, member | March 9th, 20092 comments

Box made as gift for birth of son of good friend. Reproduced in Marquetry Rockwell Leapfrog. All natural wood colurs except for red patch on trousers.

view details

Diabetes Box

shoptroll, member | March 8th, 20092 comments

Being a Type 1 diabetic means constant blood sugar testing and regular insulin injections. Since I don't want to suffer the consequences of poor blood sugar control, I test 10 to 15 times a...

view details

Mahogany Crotch Bureau

PaulJeffrey, member | March 4th, 2009

Bureau with spot for t.v. behind doors. Mahogany crotch veneers and gaboon ebony nosing with ebony inlays.

view details

Kathy's Cylinder Jewelry Box

BobEdenhofer, member | February 26th, 20092 comments

Jewelry Box made from Pommele Sapele & Bubinga veneer, black walnut, & Birdseye maple - silver gilded ends with a chemical patina. Cylinder design with 2 removable form fitted...

view details

Dragonfly box

billbarrand, member | February 26th, 2009

This box is made of Walnut, Alder, figured Maple, Macassar Ebony, and Padauk.

view details

Tea Box - Fan inlay

acomart, member | February 25th, 2009

The body was made with hard maple. The lid is mahogany with hand made fans in the four corners. The borders of the lid and the keys were made with wenge. It was finished with shellac and wax.

view details

Tea Box - Oval inlay

acomart, member | February 25th, 2009

The body is mahogany and the lid was made with cherry and bird's eye maple centered with an oval inlay.The keys were made with basswood. It was finished with shellac and wax.

view details

Tea Box - Spalted maple

acomart, member | February 25th, 2009

The body is mahogany and the lid is dyed maple with spalted maple in the center. The borders of the lid and keys were made with brazilian "Palosanto";. It was finished with shellac and wax..

view details

Gift Box: Throw me a curve

oldbarnguy, member | February 25th, 2009

Tamo Ash (exterior) and Pommele Sapele (interior) veneer, Aluminum solid + leaf

view details

Riverside Box in Honduran Rosewood & European Beech

EinsZweiDrei, member | February 25th, 2009

This box is titled “Riverside” for Riverside, Illinois. It is constructed of box matched 3/8” Honduran Rosewood (note, hardwood and sapwood), with slipfeathers of contrasting...

view details

Stylish Box

DennisZongker, member | February 25th, 20091 comment

Two months ago my sister died at the young age of 44, while I was designing this box, so I named it after her, "Little Sister" It is made out of solid Ribbon Stripped Mahogany...

view details

showing 193 - 224 of 316 posts
First < Previous 5 6 7 8 9 Next > Last

An application error was encountered.

Severity: Warning

Message: file_get_contents(http://custommade.com/feeds/xml/?keyword=wood&count=4&imgsize=150) [function.file-get-contents]: failed to open stream: HTTP request failed! HTTP/1.1 404 NOT FOUND

Filename: libraries/Module.php

Line Number: 1954

Array

Welcome to Fine Woodworking's Readers Gallery,
an online photo community where woodworkers like you can share photos of all your woodworking projects. Log in or register now to create your public profile, share photos, and comment on other photos.

Check out our brand-new SHOP GALLERY and JIGS GALLERY. Get inspired and then post pictures of your own work.

CURRENT GALLERY CHALLENGES:
Show Us Your Drawers