Reader's Gallery

showing 1 - 32 of 315 posts matching veneer [X]
1 2 3 Next > Last

Sort By:

Chiffonier in Elm Burl veneer

mouppe, member | February 10th, 20121 comment

Chiffonier in elm burl veneer loosely based on a Ruhlmann original. Finish is French polish with a garnet shellac. I left the aspen interior polished but without a finish. This way it should attract...

view details

Cone leg Highboy

billbarrand, member | February 3rd, 20121 comment

This dresser is made of solid Paduke and figured Maple and maple veneer. The drawers are solid Maple with hand cut dovetails. The legs are stave construction and turned on the lathe. This also was...

view details

Andy's Box

carmyk, member | February 1st, 20122 comments

OK, so I know I'm not the only one to be inspired by Jeff Guthrie's lovely design (item 9815 in this gallery). Mine has Madrone (arbutus, if you are in Canada) and quilted maple veneers with walnut...

view details

Hall Table

roneil, member | January 23rd, 20124 comments

Entrance way hall table with curved front. Veneered top has book matched sectors of quilted sapele and paduck sector pattern bounded by bent laminate edging. Aprons are bent laminate with a...

view details

Rosewood Cabinet

jmotto, member | January 21st, 20124 comments

I was given this rosewood veneer last year. A generous gift from a kind stranger. I made a small box as a gift recently and that led to this. The base is textured and painted poplar. The top is...

view details

Hall Console Table

franco88, member | January 7th, 2012

These are my photos of one of a pair of tables for the mid-hallway of this residence. The finish is a waterwhite lacquer polished to 1000 with rottenstone and buffed. The veneer of quater sawn...

view details

Brotherly love

Thomabubinga, member | December 31st, 2011

This is another one of my 'veneer-jobs'. Me and my brother when we were young. This is the first time I tried to veneer real people. It was a fun job, but not very easy :) Suggestions and...

view details

Satu Cinta

Thomabubinga, member | December 31st, 2011

Hello everyone, my name is Thomas. I'm 22 years old and I live in the Netherlands. Since I gratuated from the Dutch furniture school last year, I got all into veneering inlay/marquetry. I love it and...

view details

Solid Maple & Veneer floor lamp

Rich67, member | December 26th, 20113 comments

Hi, this is a lamp I made recently from solid Maple and Maple Veneer.

view details

Occasional Table

markbs, member | December 19th, 2011

This occasional table was designed and constructed for the 12th annual Texas Furniture Makers Show. Paduak (veneer), Figured Soft Maple, Curly Hard Maple and Jatoba are the woods used in the...

view details

Cabinet with Celtic Styling

AlanBYoung, member | December 11th, 2011

A cabinet in white-oak and black walnut with Celtic influenced details. Celtic Knots in black walnut on the top and the door. The door also features a Celtic Crosson the panel and a hand made brass...

view details

Sapple and Cherry table

EandS, member | December 3rd, 2011

This table was made for a art show my wife and I are in tomorrow and if it does not sell it will sit in our in home showroom. The top is solid Sapple and the body is Cherry. It has very elegant...

view details

Curvy Cot

Callu, member | November 27th, 20112 comments

This is my first major piece and was supposed to be ready for the birth of my first son. Unfortunately he got it 6 months late! Laminated Silver Ash veneer with bendy-ply core, I found the...

view details

Bathroom Cabinet with Curved Doors

TheAustrian, member | November 18th, 20113 comments

The original idea was to make a piece with straightforward sides and curved doors as an eye catcher. I had seen these doors on a piece by Jeff O'Brien and decided to give it a try. Once the doors...

view details

Triangle

podemers, member | November 9th, 20113 comments

For this one, I try the triangle form mixed with curve. It's my mini-bar now. This work is Finalist for the 2012 Niche Awards

view details

Chest of drawers

donkondra1, member | November 7th, 20112 comments

Walnut frame with mortice and tenon joinery, drawer faces and side panels are curly maple veneer on baltic birch core. Drawers are maple with hand cut dovetails, handles are turned macassar ebony. ...

view details

1000yr old Redwood, Curly Maple and Bronze End Tables

OmarAngelPerez, member | November 7th, 20115 comments

These tables are the result from a gift of some 1000yr old 1/4 inch thick bookmatched pieces of Redwood. A guitar maker neighbor had these pieces for many years without being able to use them...

view details

Kitchen Table and Chairs

Bob vO, member | October 31st, 20111 comment

Chair design and table elements influenced by one of Christian Becksvoort's chair. Tabletop is clad with 3/16" veneers resawn from 8/4 maple and glued to 1" MDF substrate. Edging is 3/4" x 1 12"...

view details

Art Nouveau demilune

canoeral1, member | October 30th, 20111 comment

I designed and built this during my second semester at Red Rocks Community College. It has about 200 hours in it, there is cherry, maple, mother of pearl, veneer, and a cast bronze sun that I...

view details

Fun with Veneers

carmyk, member | October 20th, 2011

I've been working in solid wood for thirty years or so, and only recently decided to take up veneering. This is my second project, and I still have a lot to learn about the craft. Is this marquetry...

view details

Childrens Book case

toughstuff, member | October 14th, 20111 comment

This is a book case i made for my niece. there is a picture of goofy on one side and a picture of pluto on the other. the panels are 5 ply with a solid wood core. the face vaneer is curly maple.

view details

Fuchsia Box

burr, member | October 8th, 20113 comments

Hi AllThis box was specially produced for Aryma, the creators of the realistic fuchsia marquetry used on the lid and box front. The interior has been finished with sawn Native Sycamore veneers and...

view details

Two in One Table

OmarAngelPerez, member | October 7th, 20118 comments

This table gives the client choices as to which top they want to use at any given time. The base is ebonized hardwood which has a recess into which sits the circular veneered insertnbsp...

view details

Walnut Desk

na_nelson, member | October 5th, 20114 comments

Walnut Desk Air-dried Walnut, White Oak 30" H x 47.5" W x 22" D Desk inspired by a particular plank and a general love of Walnut and desks heh. The subtle curves made the drawer box a challenge...

view details

"Firefly"

Triumph1, member | September 30th, 20113 comments

The body of "Firefly" was made from crotch walnut that is put together using blind dovetails. The back panel is quilted maple and there are quartersawn maple runners, to support the drawer, inlaid...

view details

"Aspire"

Triumph1, member | September 28th, 20114 comments

The design for “Aspire” was spawned from the strong feelings I had following a public art exhibit I participated in. It was such an amazing night of art and community I knew I wanted to...

view details

Seymour Inspired Work Table

mgpastre, member | September 26th, 2011

Just another piece,,, it has interior compartments for storage. The banding was made by me.

view details

Arts & Craft Night tables

Sandhill_bob, member | September 19th, 20112 comments

My thanks goes out to the person that sent me the Makore veneer I was never able to thak them because I don't have the contact information for them, so thank you if you recognise the panels.

view details

A tale of two chairs

YOUNGNICK, member | September 12th, 20111 comment

This is a story of how one design leads to another, and then another. It started with a cylinder cut in half and with the addition of a seat and the back, I sprayed it black to make sure I liked it...

view details

A box fit for a future King & Queen.

burr, member | September 10th, 20116 comments

Hi Guys I was commissioned to make this box as a gift for HRH Prince William & Catherine Middleton.The box is made from native sycamore and has 2 lift out trays. Each tray has been divided up...

view details

Cufflink box

AndrewCr, member | September 9th, 20117 comments

This is a large case, 20” x 14” x 14” intended for cufflinks. The main body of the box is made from oak and birch ply – it is veneered with spectacular American sweet gum...

view details

My Marquetry Creations

amazoncanvas, member | September 8th, 20111 comment

To create a piece of marquetry, I first hand sketch the subject, then redraw the subject by partitioning it into many smaller shapes while selecting an appropriate piece of wood for each shape...

view details

showing 1 - 32 of 315 posts
1 2 3 Next > Last

An application error was encountered.

Severity: Warning

Message: file_get_contents(http://custommade.com/feeds/xml/?keyword=wood&count=4&imgsize=150) [function.file-get-contents]: failed to open stream: HTTP request failed! HTTP/1.1 404 NOT FOUND

Filename: libraries/Module.php

Line Number: 1954

Array

Welcome to Fine Woodworking's Readers Gallery,
an online photo community where woodworkers like you can share photos of all your woodworking projects. Log in or register now to create your public profile, share photos, and comment on other photos.

Check out our brand-new SHOP GALLERY and JIGS GALLERY. Get inspired and then post pictures of your own work.

CURRENT GALLERY CHALLENGES:
Show Us Your Drawers