|
|
|
|
Reader's Gallery
Post your project Subscribe to RSS feed
keepsake box
2 commentsA keepsake box intended for close friends newly married. The top opens to hold their wedding rings which when opened the front drops open in unison (in the manner of a drawbridge) which holds...
view details
Contemporary Entertainment Center
This entertainment center was my first foray into working with plywood and pocket-hole joinery. This piece is the central component. The plans also come with details for matching side stands...
view details
Cherry and Walnut End-Grain Cutting Board
1 commentEnd-grain cutting board made using walnut and cherry woods. The finish is a mix of mineral oil and beeswax. This board is about 12 1/2 x 15 inches.
view details
Movement Table
1 commentThis tables shape is the reason I named it the movement table. It is made using Spanish Cedar because it has to endour the damaging sunlight and wet weather of Louisiana. The client I made it for put...
view details
Musical Table
I designed and built this table for my wife. She is a piano teacher and needed a place to put her piano books. The table top simulates a musical staff using wenge and zebra woods done using...
view details
Walnut and Cherry Clock
2 commentsI designed and built this clock using walnut and cherry. The hour and minute hands are made out of cocobolo. It includes three drawers and stands off the floor on legs attached to the sides.
view details
mahogany box
7 commentsmahogany box: 300x200x120mm, with hand veneered sapele base. I used only hide glue. I finished the outside of the box with teak oil, then thinned polyurethane, and used shellac for inside the box.
view details
Black Walnut & Zebrawood console
2 commentsThe original design is made from Black Walnut and Zebrawood. Behind the panel doors are shelves on one side drawers on the other. stainless steel legs give it a contemporary look. Soft close hinges...
view details
Dancing Cross
1 commentI made this cross for a local church here in Barbados. The cross is quite large - 12 feet tall and almost 9 feet wide. The stained glass is my own design but was made by a local stained...
view details
Pedestal
3 commentsThis one was a bit complicated. It was designed and built for a fine art glass collector to use for displaying her collection. Materials consist of Honduran mahogany (hope the rainforests forgive me...
view details
Chest sans Sides
4 commentsCherry, Red Oak, Maple, Sycamore, Pecan, Red Cedar The design of this unusual piece came to me in a flash one day, but the execution took several months. The piece has no sides...
view details
A Special Cabinet
1 commentCherry, Red Oak, Sycamore, Ambrosia Maple, Walnut, Shellac Polish Finish 33"H x 43-1/2"W x 17-1/4"D I call this a Special Cabinet because it is a quite amazing combination of needs and design. It...
view details
Chris & Morgan's Bubinga Adventure
8 commentsThis was a joint project between myself and Morgan (AZMO). I was responsible for carving the edge and smoothing the surfaces. With the reversing grain, this translated to much...
view details
Bedside Lamps
3 commentsThis is a set of nightstand lamps I made as a wedding present for some friends. At the time I had no powertools except for a handheld drill, no workbench, and a somewhat dull plane. Planing the maple...
view details
Koa and mango chessboard with mahogany surround
Koa and mango chessboard with mahogany surround is 74cm (29") on a side to accommodate large chess pieces hand carved in Micronesia.
view details
Various projects
2 commentsThese are just afew of my pieces I have designed and built over the past year. I enjoy mixing the wood, fabrics, leathers and glass to create a custom piece.
view details
Jewelry Box
This is a Mahogany jewelry box I presented to my wife last Valentines day. The box is african mahogany with a stain and a gel-urethane finish and made up of 129 individual pieces. The top and...
view details
Isabella's Treasures
5 commentsI made this treasure box for my daughter while a student at the Inside Passage School of Fine Woodworking in British Columbia Canada. This box is deceivingly small. Most people think it...
view details
Kathy's Chair
2 commentsI designed and made this chair, including the woven Danish-cord seat, while a student in the 9-month Craftsman program at the Inside Passage School of Fine Woodworking in British Columbia Canada.
view details
walnut media cabinet
1 commentHandmade Modern Through the aids of modern power tool jigs, this cabinet was made using entirely hand tools. Walnut Media Cabinet. More at www.workingwood.ca
view details
The ICON
3 commentsThe ICON was borne out of a desire to bring multimedia to the living room / board room in an attractive, modern, yet familiar package. All of the traditional mechanics have been replaced by a PC and...
view details
wall cabinet
1 commentWall cabinet made for a wedding gift for a friend. Bubinga with spalted maple door panels, curly maple shelves. Waterlox finish.
view details
cherry night stands
A pair of night stands to match the dresser. All cherry with "Rainforest Green" marble top. Mortise & tenoned frames.
view details
Display Cabinet
This display cabinet, designed by Jim Stack (Cutting Edge Router tips and tricks) was my first piece of furniture. It features five sided legs of padouk, a wenge frame with a maple strip to...
view details
Audio furniture 'crane'
1 commentAudio furniture / cabinet inspired by a discovery channel programm about cranes! Take a look at my website (www.arneoostveen.nl) to see an animation and a better view at the construction.
view details
Cherry / black MDF jewelry box
Jewelry box / tea box made of black MDF with cherry boxes. In the top a special piece of figured cherry filled up with epoxy.
view details
Aalto Inspired Tea Cart
3 commentsInspired by the Alvar Aalto's tea carts from the 1940's. My client who is a designer came up with this design. The lamination were the most challenging part of this piece. 24 layers of 142"...
view details
Donna Side Table
Designed to be used as a side table this piece is an exploration in wood grain and joinery. Solid Zebrawood, Walnut and Ebony was used. 16"d x 16"w x 18"h
view details
Bent Laminate Floor Lamp
3 commentsOne piece of walnut was used to create this indoor floor lamp. I resawed all of my own veneer using my band saw. The bolts were used so that the lamp could be flat packed and shipped...
view details
|
|
Welcome to Fine Woodworking's Readers Gallery,
an online photo community where woodworkers like you can share photos of all your woodworking projects. Log in or register now to create your public profile, share photos, and comment on other photos.
Check out our brand-new SHOP GALLERY and JIGS GALLERY. Get inspired and then post pictures of your own work.
CURRENT GALLERY CHALLENGES:
Show Us Your Drawers
Got Jigs? Tip Top Tables Scraptacular Holiday Gift 2009 Cure for the Common Cabinet
Classical Style
Wood Turning Projects
Creative Bookcases
Build Outside the Box
Tool Chests and Cabinets
Built-In Furniture
Exposed Joinery
Reclaimed Lumber Projects
Holiday Gifts 2008
HOW TO LOGIN:
Step One: Create Your Profile or Login
Step Two: Post Pictures of your Furniture or Shop or Jigs.
Step Three: View Your Page
Join Woodworkers Like You
283417 woodworkers have joined Fine Woodworking. Create your profile and join the Fine Woodworking community!
Create your profile now!
