Reader's Gallery

showing 1 - 32 of 457 posts matching modern [X]
1 2 3 Next > Last

Sort By:

Dovetailed hall table

accentcreate, member | February 12th, 2012

A small hall table made from salvaged Sydney blue gum and silver ash. This was designed as an exercise in dovetails. Every joint is a dovetail of some kind. The breadboard ends are sliding...

view details

Zebra wood -Walnut box

jbschutz, member | February 7th, 2012

Zebra Wood box with Walnut lid and interior tray. Approx. 5.5 x 5.5 inches. Tapered sides; lined with black velvet and finished with hand-rubbed poly.

view details

Corner TV cabinet

mrossk, member | February 6th, 2012

Corner TV cabinet. Peruvian mahogany, Australian black bean veneer, and ebonized cherry. Front and sides angled 10 degrees

view details

Cone leg Highboy

billbarrand, member | February 3rd, 20121 comment

This dresser is made of solid Paduke and figured Maple and maple veneer. The drawers are solid Maple with hand cut dovetails. The legs are stave construction and turned on the lathe. This also was...

view details

Moon and Stars Table

Bluecab, member | January 23rd, 2012

This bar height table was created using a salvaged maple counter slab. The walnut moons/stars visible on the top are through tenons used to attach the top to the base (see photo #4). The maple...

view details

Rosewood Cabinet

jmotto, member | January 21st, 20124 comments

I was given this rosewood veneer last year. A generous gift from a kind stranger. I made a small box as a gift recently and that led to this. The base is textured and painted poplar. The top is...

view details

Modern Organic Furniture

modernorganicfurn, member | January 17th, 2012

800x600 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 ...

view details

Sofa Table - Streams of Life

mlehikoi, member | January 7th, 20121 comment

This is my first attempt at a 'fine furniture' piece. The top is made from Curly Maple and the legs/aprons from maple. The separation of the boards in the top are reminiscent of how every life's path...

view details

Solid Maple & Veneer floor lamp

Rich67, member | December 26th, 20113 comments

Hi, this is a lamp I made recently from solid Maple and Maple Veneer.

view details

Occasional Table

markbs, member | December 19th, 2011

This occasional table was designed and constructed for the 12th annual Texas Furniture Makers Show. Paduak (veneer), Figured Soft Maple, Curly Hard Maple and Jatoba are the woods used in the...

view details

Modern Coffee table

tymann09, member | December 12th, 20112 comments

This is a modern/contemporary coffee table that I designed. I built it out of Maple and Cherry and used a Velvit oil finish with a wax coat on top. Some of the neat features it has is a 2-way drawer...

view details

Tree Ring on Old growth By Woodlab Designs

humboldthardware, member | December 12th, 20111 comment

Woodlab Designs can be found at Humboldt Hardware. (humboldthardware.com)

view details

Curvy Cot

Callu, member | November 27th, 20112 comments

This is my first major piece and was supposed to be ready for the birth of my first son. Unfortunately he got it 6 months late! Laminated Silver Ash veneer with bendy-ply core, I found the...

view details

Floating Chair

Bluecab, member | November 24th, 20111 comment

A recently completed design exploration. Maple bent laminations with walnut accents and held together with 1/2" birch dowels and marine plastic resin. Thanks' for looking!

view details

QUB Farmhouse Table

Scummings, member | November 23rd, 20111 comment

The QUB Farm-House Table is the Square Form realization of a Darryl Carter Inc. design. This massive table is 10'-2" long, 36" wide and 2'-6" high. It seats 8-10 diners...

view details

Mobbed to the Side

TheAustrian, member | November 18th, 20114 comments

Finding a board of walnut in my stack with these striking patterns made it clear it had to be used for drawers to heighten the effect. Another piece of cherry with a life of its own resulted in the...

view details

Bathroom Cabinet with Curved Doors

TheAustrian, member | November 18th, 20113 comments

The original idea was to make a piece with straightforward sides and curved doors as an eye catcher. I had seen these doors on a piece by Jeff O'Brien and decided to give it a try. Once the doors...

view details

My First Segmented Bowl

NHAccents, member | November 13th, 2011

This was my first attempt at turning a segmented bowl. I attended a local guild meeting with a member of the Guild of NH Woodworkers. Claude Dupuis demostrated the process and I did some additional...

view details

Ryan Floating Media Shelf

SchefflerWorkedWood, member | November 8th, 20112 comments

RYAN FLOATING MEDIA SHELF with HANGING DRAWER + ZEBRAWOOD INLAY ** The shelf's final dimensions are: 116"L x 12"W x 5"H ** Finish is hand-rubbed oil & wax: 5 coats...

view details

Sideboard/Dresser

Wyler, member | November 1st, 2011

The client wanted a piece she could use as a sideboard or a dresser. She wanted the outer joints to be mitered but I was able to talk her into the dovetail detail. It was constructed...

view details

Kitchen Table and Chairs

Bob vO, member | October 31st, 20111 comment

Chair design and table elements influenced by one of Christian Becksvoort's chair. Tabletop is clad with 3/16" veneers resawn from 8/4 maple and glued to 1" MDF substrate. Edging is 3/4" x 1 12"...

view details

Ribbon Box

qcwood, member | October 23rd, 20113 comments

This Ribbon Box is 8 inches in diameter and approx. 6 inches high. It is made of Walnut and American Holly. It was made with a scroll saw and not a lathe. In order to gain the...

view details

Two in One Table

OmarAngelPerez, member | October 7th, 20118 comments

This table gives the client choices as to which top they want to use at any given time. The base is ebonized hardwood which has a recess into which sits the circular veneered insertnbsp...

view details

Super bright LED floor standing light

Rich67, member | October 5th, 20112 comments

Hi Folks, I thought I'd share this. I bought some strips of super bright LED's to make a floor standing light with them. Mainly to use up some scraps I had and to be able to read during the winter...

view details

Pigeonhole Hall Cabinet 58 Inch

sundogenterprises, member | September 25th, 2011

The design for this piece was inspired by the cabinet-on-stand design popularized by James Krenov. Pigeonhole assemblies are usually part of larger furniture but this one has been elevated to the...

view details

Oval Tambour Deskâ�¢

sundogenterprises, member | September 25th, 20113 comments

This desk is a member of a lineage that has persevered since the late 70's. It is made with plain figure White Hard Maple and Birdseye maple. It is 40 inches wide and 28 inches deep. Closed up it...

view details

A tale of two chairs

YOUNGNICK, member | September 12th, 20111 comment

This is a story of how one design leads to another, and then another. It started with a cylinder cut in half and with the addition of a seat and the back, I sprayed it black to make sure I liked it...

view details

Ornamental Birdhouse

manfred88, member | September 10th, 2011

Ornamental birdhouse made with scraps from other projects, I used about 12 different hardwoods. Parrot is handpainted ceramic.

view details

Contemporary Walnut Chair

Rich67, member | September 6th, 20112 comments

This is my first attempt at building a chair. I must admit it was quite tricky and I took quite a while thinking about the initial shape which changed a few times during its design. I probably over...

view details

simple box

BramSibma, member | September 4th, 20111 comment

My first serious attempt to make a nice box with hinges and a button lock. Wood species are Wengé, Padauk, Marblewood and Ash.

view details

some claro walnut tables

danmosheim, member | August 22nd, 2011

a post about two tables and 8 chairs we delivered to long island last week

view details

captain's chest

YOUNGNICK, member | August 11th, 20111 comment

A captains sea chest given a face-lift. It was intended for an 18 year old's birthday so the seaworthiness was not required , so no heavy lock, metal straps far too gothic and heavy carved initials...

view details

showing 1 - 32 of 457 posts
1 2 3 Next > Last

An application error was encountered.

Severity: Warning

Message: file_get_contents(http://custommade.com/feeds/xml/?keyword=wood&count=4&imgsize=150) [function.file-get-contents]: failed to open stream: HTTP request failed! HTTP/1.1 404 NOT FOUND

Filename: libraries/Module.php

Line Number: 1954

Array

Welcome to Fine Woodworking's Readers Gallery,
an online photo community where woodworkers like you can share photos of all your woodworking projects. Log in or register now to create your public profile, share photos, and comment on other photos.

Check out our brand-new SHOP GALLERY and JIGS GALLERY. Get inspired and then post pictures of your own work.

CURRENT GALLERY CHALLENGES:
Show Us Your Drawers