Reader's Gallery

showing 1 - 32 of 155 posts matching marquetry [X]
1 2 3 Next > Last

Sort By:

Låg Coffee Table

julienhardydesign, member | May 21st, 2013

Coffee table of Gonçalo Alves and Macacauba inlaid with Macassar Ebony, Cocobolo, Macacauba and Gonçalo Alves.Base joined with pinned bridal joints and wedged through tenons. Splined top. Pure Tung...

view details

Marquetry Picture

iowadave, member | April 21st, 2013

Marquetry picture design from wife's quilt book. I used double bevel technique. Base is MDF. I made the frame also.

view details

A Simple Pen Box

OwenN, member | April 19th, 20134 comments

This is a small project that I undertook after I had bought a pen turning kit. I could not make the pen until I had a nice place to keep it. Hence this project was born. But the project started with...

view details

The Singing Butler, marquetry

timzhao, member | March 23rd, 20133 comments

This is the marquetry version of Jack Vettriano's famous painting "the singing butler". Size: 9x11" for the marquetry, 16x19" for the frame. material: more than a dozen types of wood veneers. Finish...

view details

Jewelry Boxes

markbarabas, member | December 27th, 2012

These are jewelry boxes I built as Christmas presents for my daughters.I borrowed several design ideas from other projects I found on the web.The boxes are walnut and maple "ebonized" with India...

view details

Handmade Dovetail Box

C_Conneely, member | November 9th, 20123 comments

This is a Handmade Dovetail box made from beech with marquerty on lid. It is currently on show in Farmleigh House in Pheonix Park in Dublin Ireland which is a huge achievement. I made it while in...

view details

Nesting Jewelry Boxes

FWW_Gallery, member | October 24th, 20122 comments

Woodworker: Dick SchultzSchultz built these four jewelry boxes to nest inside one holding tray. The boxes and tray are wenge, and the anigre lids are designed with one marquetry pattern flowing...

view details

Flowering Rush Cabinet of Curly Soft Maple

FWW_Gallery, member | October 24th, 2012

Woodworker: Paula GarbarinoGarbarino had been working in a cabinet shop for five years when she attended NBSS. “I finally decided I wanted to increase my skills,” she says, and the experience was...

view details

TV Table

SergeyOK, member | October 15th, 20121 comment

My first wood project.

view details

Marquetry miniatures

adriatico021, member | September 29th, 2012

I could not resist the amazing photography of Italian photographer Gabriele Rigon ..Photo radiates magical sensuality and eroticism quiet .. and inspire you through the medium of wood testimony again...

view details

Mandy

Thomabubinga, member | September 9th, 20123 comments

This jewelry box was a gift for my girlfriends birthday. It's made of maple burl veneer, with a leather interior. The inlay is black dyed veneer and the pull is made of grenadilla wood

view details

A Chess Set For My Daughter

Stu in Tokyo, member | August 16th, 20126 comments

Last year, on the evening of December 23rd, my youngest daughter asked me for a chessboad for her Christmas present. I was able to bang out a very basic chessboard by Christmas morning. I told her...

view details

The making of "The Bird and The Bee"

amazoncanvas, member | July 2nd, 2012

This is a movie I created to share the 5-Step process I used to create marquetry. It is an animated movie, with Charlie, the bee and Lizzi, the bird interacting with Debbie, the narrator to explain...

view details

Marquetry Rose Jewelry Box

SRogers93, member | June 20th, 2012

This is a jewelry box made for a Relay For Life auction at my work place. I made the rose with thin veneer and cut each piece with an exacto knife. I made the joints with the Fast Joint system. The...

view details

Just married

Thomabubinga, member | June 17th, 2012

This was a wedding gift for my cousin and his wife, who just got married. In this piece I worked with some new veneers, like the black, blue and white (man-made) veneers and the grey dyed limba...

view details

Spice Box

CharlesDewey, member | May 2nd, 20126 comments

My first attempt at marquetry. I used dovetails for the case and drawer construction. I utilized a base frame and a molding frame For the feet and top. Made of curley maple and cherry...

view details

Will Smith

Thomabubinga, member | April 14th, 20123 comments

In this piece of work, I tried to get the right contrast in the face, with only one type of wood (walnut). It took me some time to pick the right pieces, but overall im satisfied with the result.

view details

Treasure Box

iowadave, member | March 21st, 2012

This is a Treasure Box I made for my 3 year old grand daughter. It's made of cherry with various veneers on top design.

view details

Side Table

iowadave, member | March 21st, 2012

This is a bedroom side table I made for my son. The Base is cherry. I used my collection of veneers to make the design on top. I used Michael Dunbar's design and added the top design myself.

view details

Firehouse Table

ElliotZ, member | March 12th, 20124 comments

I was asked to restore the dining table for the Great Falls, VA Volunteer Fire Dept. as part of the grand opening of the new station. The table—a 10’ x 3’ x 2 3/4” maple...

view details

Coffee Table

greenfarmer, member | February 25th, 20121 comment

After a house fire last year the coffee table I had was destroyed so I had to build myself a new one. The tiger maple used for the top reminded me of ripples in a stream and so it needed some...

view details

Muliti-Design Mirror

markbarabas, member | February 12th, 2012

Normal 0 MicrosoftInternetExplorer4 For this, my first solo attempt at veneer and marquetry, I took design inspiration from several woodworkers including Johanathan Benson, Paul...

view details

Writing box

acomart, member | February 4th, 20122 comments

I crafted this writing box for a client that wanted an exclusive and different box. The exterior and interior are all in cherry. The inlay bicolor band was made with holy veneer and...

view details

Brotherly love

Thomabubinga, member | December 31st, 2011

This is another one of my 'veneer-jobs'. Me and my brother when we were young. This is the first time I tried to veneer real people. It was a fun job, but not very easy :) Suggestions and...

view details

Satu Cinta

Thomabubinga, member | December 31st, 2011

Hello everyone, my name is Thomas. I'm 22 years old and I live in the Netherlands. Since I gratuated from the Dutch furniture school last year, I got all into veneering inlay/marquetry. I love it and...

view details

A Tribute to Hokusai - A Marquetry Jewelry Box

RJ1403, member | November 8th, 20118 comments

I absolutely love the 18th century woodblock prints from the great master Katsushika Hokusai (1760-1849) showing the force of nature and the beauty of Mt. Fuji. Here is a jewelry box which...

view details

Art Nouveau demilune

canoeral1, member | October 30th, 20111 comment

I designed and built this during my second semester at Red Rocks Community College. It has about 200 hours in it, there is cherry, maple, mother of pearl, veneer, and a cast bronze sun that I...

view details

Childrens Book case

toughstuff, member | October 14th, 20111 comment

This is a book case i made for my niece. there is a picture of goofy on one side and a picture of pluto on the other. the panels are 5 ply with a solid wood core. the face vaneer is curly maple.

view details

Fuchsia Box

burr, member | October 8th, 20113 comments

Hi AllThis box was specially produced for Aryma, the creators of the realistic fuchsia marquetry used on the lid and box front. The interior has been finished with sawn Native Sycamore veneers and...

view details

Rohlfs Inspired Desk Chair 3

woodbridge, member | October 2nd, 20111 comment

Rohlfs inspired desk chair #3. 50 ½ inches high, 15 ½ inches wide and 16 inches deep. I made this chair for my nephew who is has just moved into his first homenbsp...

view details

Virgin of the Rocks, Leonardo Da Vinci

timzhao, member | July 7th, 20114 comments

Virgin of the Rocks is a masterpiece of Leonardo da Vinci. There are two versions of this picture, I made this marquetry work as the London version. Size: 6.5x9", finish: french Polish.

view details

How to Cut Decorative Parquetry or Marquetry Using the Window Method

DennisZongker, member | July 3rd, 20116 comments

This Marquetry or Decorative Parquetry panel is an insert for a conference table. This is the companies logo, It’s an abstract design of an Black Hawk. The panel size is 24rdquo...

view details

showing 1 - 32 of 155 posts
1 2 3 Next > Last

Advertise here for as little as $50. Learn how

Welcome to Fine Woodworking's Readers Gallery,
an online photo community where woodworkers like you can share photos of all your woodworking projects. Log in or register now to create your public profile, share photos, and comment on other photos.

Check out our brand-new SHOP GALLERY and JIGS GALLERY. Get inspired and then post pictures of your own work.