Reader's Gallery

showing 129 - 160 of 281 posts matching inlay [X]
First < Previous 3 4 5 6 7 Next > Last

Sort By:

Blue Ulysses Sideboard

Craig_T, member | October 3rd, 200911 comments

Normal 0 The primary goal of this project was to create a showpiece for the entry hall of the clients' home. It was commissioned by a local couple who requested marquetry imagery featuring...

view details

Valley of Virginia side table

sneigh, member | September 30th, 20093 comments

This is a reproduction of a walnut table of unknown origins. The original was probably built by a farmer. The inlay pattern was developed in the late 18th century by cabinet makers in the north...

view details

Jewel Cabinet

ScottStewartDesigns, member | September 30th, 20095 comments

The bamboo base joins 32 points in curved and angled space. The case is a perfect golden rectangle (PHI) banded with an intersecting inlaid wave pattern in steam bent rock maple that mimics the...

view details

Bad Moon Rising

Argyllshire, member | September 30th, 20091 comment

I designed this box to have a secret compartment contained within the lid which is only 3/4'' thick.Soss hinges were used to lift the lid and also the center section which swings up.The lift...

view details

Display Cabinet

ctillman, member | September 30th, 20091 comment

This display case was created using mortise and tenon joinery. The inlay was created by sandwiching a 1/4" thick board of walnut between 2, 1/4" thick boards of maple and then cutting slices...

view details

"Dunes"

Argyllshire, member | September 30th, 20096 comments

I designed this box to express how a visit to the ocean makes me feel.The wind blown sand,surf,driftwood.I like the organic,natural feel to this box...it encourages people to touch it.

view details

"Deco"

Argyllshire, member | September 30th, 20095 comments

I designed this panel style box to express some of the Art Deco style.I wanted to make a box that was formal in design then shape it free form, a contradiction.

view details

Arts and Crafts table

Argyllshire, member | September 30th, 20093 comments

This is my interpretation of a Craftsman style table with elements from Greene and Greene added in. Quarter sawn white oak accented with bloodwood and walnut, and an antler handle. This was a gift...

view details

Cameo, Jewelry Box

DennisZongker, member | September 29th, 20091 comment

It’s based off the Cameo necklace, which first appeared around the time of Alexander the Great. This distinctive piece of jewelry has enjoyed popularity throughout classical times. the...

view details

Federal Gentleman's Dressing Table

frankfive, member | September 28th, 20091 comment

Various elements of the Federal Period are interpreted in this Gentleman’s Dressing Table of my own design. The reeded bobbin detail in the legs and the prominent shaded fan challenge...

view details

This was a project I started for a customer in Montana and was looking for a more southwest style and came up with this it a entertainment center with slat inlays on the doors and molding this is a...

view details

Regency inspired Writing Desk

AlanBYoung, member | August 31st, 20091 comment

This Regency inspired Writing Desk is made from Walnut, Walnut veneer, and Sapele. The design is dominated by gilded carvings, edge treatments and moldings. --> -->

view details

Arts and Crafts Bed

Michael666, member | August 30th, 20096 comments

I have finally completed my Queen sized bed. Regrettably, the light was not ideal for photography with my dated digital camera. I have incorporated several ideas that I liked from a...

view details

One day to Ninstints

Pierrolekebeko, member | August 14th, 2009

This small cabinet is my first veneered furniture (16'' deep x 17'' width x 36'' tall). Used as a mini bar, the hummingbird inlay (ipe, sycomore, bloodwood) is directly inspired by the Haiumlda...

view details

Bookshelf Bench

cflansbaum, member | August 4th, 2009

This is a piece I designed and created for a good friend of mine who wanted a bench for the foot of her bed. It needed to be a place for books, but also have drawers. She was very...

view details

Backgammon & chess board with all the pieces and storage box

fuzzy4ou, member | July 28th, 2009

Backgammon and chess board with all the pieces and storage box made from walnut, fiddle back maple, maple burl veneers and solid maple and walnut. High gloss finish on the playing surfaces. The board...

view details

Chess table

CurtThorne, member | July 21st, 20091 comment

A chess table made for my son, Owen. Owen is a quite a fan of secret spaces...ergo the hidden compartments underneath the table.

view details

Ash, Oak and Wenge contemporary bench

hima, member | July 18th, 20094 comments

Curved top bench with with Wenge inlay and trim. Tung oil finish. Mortise and tenon joinery. Height: 18" Length: 37" Width: 12"

view details

Sheraton Side Tables in Mahogany

Sanjeev, member | July 18th, 20093 comments

I wanted to try my hands on turning. This project was a result of that. The eight legs on these tables are the only eight pieces of wood I have ever mounted on a lathe. I also used the...

view details

The project after the Tool Chest

Diviner, member | July 9th, 2009

After building the tool chest, I didn't get the sense of fulfillment I imagined incorporating the usual woodworking techniques like joinery. But I did enjoy all the decorative work. The next leg of...

view details

Brookwood Box

brookdalewoods, member | June 30th, 20097 comments

WHITE OAK MACHINIST BOX Zebra wood with custom aluminum handles. Box lid latches internally and secures the drawers by a quarter turn on main knob. Side handles are built into the frame to...

view details

Laptop Desk for Yoga Enthusiasts

wrrnvghn, member | June 29th, 2009

This desk was commissioned by my son who will sit cross-legged for hours using his computer. It is made of maple, maple plywood and walnut, and finished with polyacrylic. It measures approximately 31...

view details

Chest with a workspace

bafaans, member | June 28th, 20093 comments

84L 36W 39H 13 Wood species used from local logger, Self Air dried, Salvaged stairs and pallets. 8 Months to complete. Demountable for easier transport.

view details

Walnut Desk

Haldeman, member | June 27th, 20093 comments

I completed this walnut desk while in my last semester at college. The inlay on top is walnut, holly and bubinga and the drawer fronts are veneered in bubinga and holly stringing. The...

view details

Roll Top Secretary Desk

GarrisonWoodworking, member | June 25th, 2009

A Roll Top Desk I made as a project in college. it has a diamond matched veneer top, book matched veneer sides, and a hand made tambour door. all in cherry

view details

Jewelry Box

WillyB, member | June 25th, 20091 comment

A jewelry box i made in my high school wood shop for my girlfriend. This project was my first experimentation with inlay. I used lace wood for the sides and curly maple for the top of the...

view details

Chess Board

GarrisonWoodworking, member | June 24th, 20091 comment

Hand veneered Walnut and Beech top, with a hoper bottom Walnut Box.

view details

Empire Bookcase

AlanBYoung, member | June 24th, 20093 comments

This is a rather bold and brassy piece. Literally. I designed and fabricated all the brass features and hardware on this bookcase except the door hinges and catches. These details include...

view details

Maple & Walnut Chess Table

HIguy, member | June 23rd, 20093 comments

Maple & Walnut Chess Table Designed by Nick Stratton

view details

Heather's Hutch

deckboards, member | June 20th, 2009

Built in hutch/ wine rack built to match Dale's bar (see other post) the top is a single piece of old growth birch salvaged from lake superior with an absolutly beautyfull flame pattern on top of...

view details

Toolbox for the Workshop

snapperhead, member | June 19th, 20094 comments

I needed a tool box in my workshop to hold all my carving tools and hand tools. I had tools in rolls, different cabinets and boxes. When I needed something it took time to find their...

view details

Retro

Argyllshire, member | June 12th, 20093 comments

Concept: I based this design on elements from the Arts and Crafts, Greene & Greene, Mission, and Art Deco styles.I wanted to capture the feel of a 1930s radios.I tried to keep the lines simpleto...

view details

showing 129 - 160 of 281 posts
First < Previous 3 4 5 6 7 Next > Last

An application error was encountered.

Severity: Warning

Message: file_get_contents(http://custommade.com/feeds/xml/?keyword=wood&count=4&imgsize=150) [function.file-get-contents]: failed to open stream: HTTP request failed! HTTP/1.1 404 NOT FOUND

Filename: libraries/Module.php

Line Number: 1954

Array

Welcome to Fine Woodworking's Readers Gallery,
an online photo community where woodworkers like you can share photos of all your woodworking projects. Log in or register now to create your public profile, share photos, and comment on other photos.

Check out our brand-new SHOP GALLERY and JIGS GALLERY. Get inspired and then post pictures of your own work.

CURRENT GALLERY CHALLENGES:
Show Us Your Drawers