December 19, 2015
I built the Essential Tool Box featured in FW. I mocified it by adding an extra drawer. I found when finished I didn't like what I was putting the box…
December 8, 2015
I perform this Maloof inspired walnut rocker with some luck, and some personal detail add on. It take 200H.. Finish with Danish oil and oil-wax. www.my-rocker.com Dr Richard Zimmermann-Belgium
November 26, 2015
I have made this for my wife on 10th anniversary 2015. Maple burl and curly was used in front doors with wenge frame. Walnut wooden hinges were utilized to install the front…
November 14, 2015
Outdoor bench. Steam bent and laminated oak, leopard wood, paduak, walnut, zebra wood, ebony, Madagasar ebony. Three layers of clear epoxy and several layers of marine varnish.
November 6, 2015
Accurate table saw milling machine - 0.03 mm thread adjusted wedge 30mm longitudinal = 1mm lateral. 4mm adjustment from initial double locked fence position, so 2mm either side of zero,…
October 8, 2015
See who won a copy of Handcut Dovetails
September 30, 2015
The craftsman’s calling card
September 10, 2015
Nesting Cabinet in stand. cabinet is fassened to stand with through wedged tenons. integral drawer and door pulls. stand, drawer fronts, carcasse interrior; European Beech. Carcasse is shopcut...
September 3, 2015
This is my version of Christian Becksvoort's Shaker Lap Desk (FWW #248). I didn't have any good white pine on hand but I did have a piece of mahogany that…
August 19, 2015
This is my second attempt at a cradle. I used the same leg profile as the last one(I really like the strength and look of them). I purchased a new…
Subscribe now and save up to 56%
© 2018 The Taunton Press, Inc. All rights reserved.
Become a member and get instant access to thousands of videos, how-tos, tool reviews, and design features.
Start your subscription today and save up to 56%