Reader's Gallery

showing 1 - 32 of 401 posts matching dovetails [X]
1 2 3 Next > Last

Sort By:

Dovetailed hall table

accentcreate, member | February 12th, 20121 comment

A small hall table made from salvaged Sydney blue gum and silver ash. This was designed as an exercise in dovetails. Every joint is a dovetail of some kind. The breadboard ends are sliding...

view details

McGregor's Box

vejdiavsar, member | February 4th, 2012

Traditionally called Lady's Workbox. The piece was designed for modern use. It has two compartments for keys, watches, wallets and purses. Made out of Mahagony, Birds Eye Maple, Curly Maple, and...

view details

Hand cut Dovetail Tool Box

Tendonitise, member | February 4th, 20122 comments

this was all hand cut and chopped dovetails, finished with Old Masters shellac/ oil mix.

view details

Cone leg Highboy

billbarrand, member | February 3rd, 20121 comment

This dresser is made of solid Paduke and figured Maple and maple veneer. The drawers are solid Maple with hand cut dovetails. The legs are stave construction and turned on the lathe. This also was...

view details

Dream Workbench

JonJLLJC, member | January 26th, 201227 comments

My ultimate workbench-- finally finished! The bench has a tail vise, a 24" face vise, and a patternmaker's vise. Overall size is 36" x 84". The top is 4" thick laminated hard maple with a 5" bubinga...

view details

Hall Table

roneil, member | January 23rd, 20124 comments

Entrance way hall table with curved front. Veneered top has book matched sectors of quilted sapele and paduck sector pattern bounded by bent laminate edging. Aprons are bent laminate with a...

view details

Shaker-style end table

jlecomte, member | January 23rd, 20122 comments

This Shaker-style end table (see Christian Becksvoort's article in Fine Woodworking #210) is the first piece of furniture I completed. It is made of cherry (curly cherry for the top) and poplar...

view details

Executive Desk

vejdiavsar, member | January 19th, 20125 comments

This Executive desk has been comissioned for a private collection. After I finished designing I mentioned to my client about Cuban Mahagony (Swietenia Mahagoni). After his approval I searched for...

view details

cherry half sideboard

MKetelsen, member | January 15th, 20122 comments

Cherry half-sideboard. Quarter sawn sycamore is used as secondary wood for drawers. The pulls were carved from cherry crotch yielding the darker tone without using dye or stain. The crown molding...

view details

Colonial style kitchen

byrd1, member | January 8th, 20124 comments

Colonial inspired kitchen. Made of cherry with curly cherry drawer fronts. It has inset doors and drwers with mortise an tenon beaded face frames. It has a hand rubbed oil/varnish blend finish with a...

view details

Skeletons in your cupboard

chopcatuk, member | January 2nd, 20121 comment

Jewelry cabinet with watch winders.This walnut and spalted beech cabinet sits on an oak stand with cocobolo highlights.The drawer fronts (ribs) are sculpted in spalted beech with hard maple...

view details

Occasional Table

markbs, member | December 19th, 2011

This occasional table was designed and constructed for the 12th annual Texas Furniture Makers Show. Paduak (veneer), Figured Soft Maple, Curly Hard Maple and Jatoba are the woods used in the...

view details

zebrawood and birdseye maple side table

woodcreations, member | December 5th, 2011

Hand-crafted piece of funiture built of: zebrawood legs and sides, wenge trim and drawer front, and birdseye maple for the top. It is all hand planed and hand dovetailed, drawboard...

view details

side table

woodcreations, member | December 5th, 20111 comment

This is a hand crafted piece of funiture using waterfall bubinga , regular bubinga, and tiger maple for the shelf. The drawer is made of airomatic cedar. It is all hand...

view details

Birds eye Maple side table

EandS, member | December 3rd, 2011

This elegant side table was designed for a customer in Portsmouth NH. It has a hand dovetailed drawer and Ebony beading around the face.

view details

Floating Chair

Bluecab, member | November 24th, 20111 comment

A recently completed design exploration. Maple bent laminations with walnut accents and held together with 1/2" birch dowels and marine plastic resin. Thanks' for looking!

view details

Ryan Floating Media Shelf

SchefflerWorkedWood, member | November 8th, 20112 comments

RYAN FLOATING MEDIA SHELF with HANGING DRAWER + ZEBRAWOOD INLAY ** The shelf's final dimensions are: 116"L x 12"W x 5"H ** Finish is hand-rubbed oil & wax: 5 coats...

view details

Chest of drawers

donkondra1, member | November 7th, 20112 comments

Walnut frame with mortice and tenon joinery, drawer faces and side panels are curly maple veneer on baltic birch core. Drawers are maple with hand cut dovetails, handles are turned macassar ebony. ...

view details

Mahogany and Lacewood Jewelry Box

GregBodnar, member | November 3rd, 20112 comments

This was a concept piece for my chest of drawers. I worked out all the jointery that i was going to do on the larger piece

view details

Sideboard/Dresser

Wyler, member | November 1st, 2011

The client wanted a piece she could use as a sideboard or a dresser. She wanted the outer joints to be mitered but I was able to talk her into the dovetail detail. It was constructed...

view details

Compound curved chest of drawers with fiddleback hickory handles and maple drawers

GregBodnar, member | October 30th, 20113 comments

Compound curved chest of drawers made from walnut with fiddleback hickory handles and maple drawers.Bottom four drawer fronts are carved out of a single board and the top are...

view details

Art Nouveau demilune

canoeral1, member | October 30th, 20111 comment

I designed and built this during my second semester at Red Rocks Community College. It has about 200 hours in it, there is cherry, maple, mother of pearl, veneer, and a cast bronze sun that I...

view details

Shaker Inspired Nightstands

davknecht, member | October 25th, 20112 comments

This is my first real woodworking project! The stands are made out of cherry, the drawer sides are poplar and the drawer runners are maple. The base corners are hand cut mitered...

view details

Arts & Crafts Coffee Table

SLT, member | October 22nd, 20116 comments

Here's my first real piece of furniture. My Mom wanted a coffee table with storage, and "those slats on the sides." This is what I came up with. I really learned a lot. Its...

view details

Madrone Dining Sideboard

Joe Scannell, member | October 19th, 20111 comment

Madrone sideboard, designed using cardboard mockups and SketchUp. Built from a madrone tree I cut & dried 25+ years ago. Side panels are figured maple; antique glass doors. Interior is birch...

view details

Walnut Desk

na_nelson, member | October 5th, 20114 comments

Walnut Desk Air-dried Walnut, White Oak 30" H x 47.5" W x 22" D Desk inspired by a particular plank and a general love of Walnut and desks heh. The subtle curves made the drawer box a challenge...

view details

Pigeonhole Hall Cabinet 58 Inch

sundogenterprises, member | September 25th, 2011

The design for this piece was inspired by the cabinet-on-stand design popularized by James Krenov. Pigeonhole assemblies are usually part of larger furniture but this one has been elevated to the...

view details

Pair of Davenport desks for notepad

RHMay, member | September 16th, 20114 comments

My wife wanted a small but functional desk for our downsized retirement home. Having seen an antique Davenport or Captain's Desk she asked me to design one that would be functional for a home office...

view details

Hall Table "Dark Transition"

savage69, member | August 31st, 20111 comment

This Hall table called "Dark Transition" is made from Black Walnut (from Vancouver Island, B.C.), Spalted flame Maple (Vancouver Island), Ebony and Spanish Cedar.

view details

Credenza (The Conversion)

savage69, member | August 31st, 20114 comments

This Credenza, called "The Conversion" was my final project in my Joinery / furniture building and design aprenticeship program last year. It's made from African Mahogany, Quilted Hemlock, Black...

view details

Jewerly Amoire

tom012947, member | August 31st, 20111 comment

7 drawer amoire, made of Cherry with Maple drawer interiors. Firsts: dove tails, panel doors and case with that many drawers. I am an amatur, I design computer systems for a...

view details

Ridiculously complicated boxes

gewima, member | August 24th, 20115 comments

I am trying to get better at joinery, but find just practicing on scrap is rather unfulfilling. I designed this box as an exercise in joinery. There is no other intended application, although I have...

view details

showing 1 - 32 of 401 posts
1 2 3 Next > Last

An application error was encountered.

Severity: Warning

Message: file_get_contents(http://custommade.com/feeds/xml/?keyword=wood&count=4&imgsize=150) [function.file-get-contents]: failed to open stream: HTTP request failed! HTTP/1.1 404 NOT FOUND

Filename: libraries/Module.php

Line Number: 1954

Array

Welcome to Fine Woodworking's Readers Gallery,
an online photo community where woodworkers like you can share photos of all your woodworking projects. Log in or register now to create your public profile, share photos, and comment on other photos.

Check out our brand-new SHOP GALLERY and JIGS GALLERY. Get inspired and then post pictures of your own work.

CURRENT GALLERY CHALLENGES:
Show Us Your Drawers