Reader's Gallery
Post your project Subscribe to RSS feed
Walnut writing desk
1 commentThis desk was inspired by the Goddard/Townsend tea tables. Using walnut instead of mahogany provided a grain pattern that enhanced the curves in the rails. The flat section of the rail is a drawer...
view details
Roll Top Desk - a Kustom Original
This work of art was designed and hand crafted by Journey Man carpenter Kelly Reagh of Nanaimo BC. This one took a few weeks to complete with all joints using traditional wood working...
view details
My Desk
1 commentThis is my fancy new desk. It took over a year to design and build but it came out good. It weighs 260lbs, but it comes apart for moving. Nice and solid. The double-tee shape of lighter wood is...
view details
Roll Top Desk
2 commentsThis is my Roll Top Desk that I made my junior year in woodshop class. I got 1st and best of show in regional competition and 4th in state competition.
view details
Executive Desk and Hutch
Dimensions: 55"L x 24"D x 30"H Wood: Padduk, Bloodwood, Maple, Bubinga
view details
Writing/Computer Desk
5 commentsTop is constructed of Black Walnut with a piece of curly Makore down the center. The styles are cherry, and legs are a combination of Cherry, Bloodwood, and Black Walnut. The legs have a...
view details
Office Desk and bookcase
Desk made with solid maple, solid poplar and plywood 1". Detail hand made. Espresso stain color.
view details
"Victorian Style Dresser"
2 commentsThe Dresser size is 40" tall x 25 1/4" deep x 74 1/2" long. It's made out of solid cherry And cherry veneer core plywood. The drawers are out of solid maple. It took me approximately...
view details
Writting Table
This writting table is built from birch hardwoods. It stands 30" W x 72" H x 30" T. The legs were hand shaped from a 6" x 6" block. All the beading is hand scraped, then the back ground was...
view details
Standing Desk
Inspired by a photo taken from a book on Shaker furniture. The top opens on SOSS hinges with a small drawer below.
view details
Serpentine Bow Front Writing Desk
12 commentsI built this desk a year ago right after my 16th Birthday. It is a Serpentine Bow Front writing desk make out of one slab of 14" x 9' x 10/4 Ribboned Sapele. Starting from the top is is a bookmatched...
view details
Dressing Table
1 commentDressing table in quilted and tiger stripe maple with bubinga and wenge drawers. Built as a companion piece to the bath vanity (see my profile for that post) with the same proportions and...
view details
Butterfly Tavern Table
Light Figure Tiger Maple Butterfly Tavern Table. Stained with aniline Dye, Shellac, and top coat of wax.
view details
SLAB DESK - Genesis
3 commentsI’m a custom furniture maker and computer geek in Bellingham, WA. I work to combine these interests and after months of design and development, I’ve created SLAB DESK ndash...
view details
'Wave' desk
1 commentThis is my latest creation, the 'Wave' desk. It is made of 10/4" Poplar around MDF boxes. Check out my website to see more photos.
view details
Slant Lid Secretary and Thomas Jefferson Swivel Windsor Chair
3 commentsMade out of Tiger maple this secretary is a reproduction piece of one from the 18th century. It is finished with aniline dye Shellac, Glaze and a wax topcoat. The Jefferson Swivel is a replica of the...
view details
Built-In Cherry Office - Baby Huntboard
Tabletop baby huntboard for all those little things that get lost during the busy workday. A part of a larger rear desk of a full floor matching home office in Brookline Ma. Cherry handrubber...
view details
Built-in Cherry Office - Desktop Organizers
One of pair of old-school desktop organziers. Part of a rear desk unit built in to a full floor matching home office in Brookline Ma. Cherry with padauk accents, hand-rubbed oil and wax finish...
view details
Built-In Cherry Office - Desk Header
1 commentHeader of the rear desk recessed into the rafters of the mansard. Built in to a full floor matching home office in Brookline Ma. Cherry, hand-rubbed oil and wax finish. Design contends with a trilvl...
view details
Maple slab desk.
2 commentsFound this piece of spalted maple in Woodstock and hauled it back to the city. It sat in our hallway for a few months, until found a use for it. I went to look at a potential clients...
view details
artiFACT {dining table/desk}
Jason Paradis is an artist and artisan. He makes things out of wood, paint, and other stuff. A master craftsman, he offers quality, custom design & build services. If you can dream it, he can...
view details
bookWORM {handcarved dictionary stand}
2 commentsJason Paradis is an artist and artisan. He makes things out of wood, paint, and other stuff. A master craftsman, he offers quality, custom design & build services. If you can dream it, he can...
view details
A Classic with a Twist
The top of this desk was made of 61 individual pieces of walnut salvaged from a set of chairs being thrown out. Maple accents were added to tie the top to the base which features maple legs...
view details
Business Card Holder
2 commentsI utilized some scrap pieces of leopardwood and rosewood to make a business card holder for my desk. I used the rosewood for the core, between two slices of leopardwood. I added a...
view details
The Right Way to Use Contrast
Using different woods, grains, and color to add contrast is a great way to make your furniture stand out from the crowd. The trick is to do it effectively, understanding what type of contrast to use...
view details
Bookcase
This is a quarter sawn oak bookcase I built for my wife to go with a desk I built for her in 2009. This is the bottom section of a 2 part piece. next comes the open shelf to go on top. I used a...
view details
Tiger Maple Post & Beam Desk
3 commentsDesign is reminiscent of an old post & beam barn frame, complete with antique barn pegs used for drawer pulls.
view details
Mahogany Desk
The legs on this mahogany are turned 45 degrees, and are attached with a sliding dovetail. The front and back are a single piece of wood cut and reassembled to make the grain continuous across...
view details
Entry tables
1 commentI have six childeren, and so I built six of these entry tables. Two are native walnut that is air dried. Four of the cabinets are quarter sawn red oak. The tops are concrete. I don't know how that is...
view details
Desk With Hutch
Desk was made of alder with two coats of clear polyurethane for final finish.
view details
An application error was encountered.
Severity: Warning
Message: file_get_contents(http://custommade.com/feeds/xml/?keyword=wood&count=4&imgsize=150) [function.file-get-contents]: failed to open stream: HTTP request failed! HTTP/1.1 404 NOT FOUND
Filename: libraries/Module.php
Line Number: 1954
ArrayWelcome to Fine Woodworking's Readers Gallery,
an online photo community where woodworkers like you can share photos of all your woodworking projects. Log in or register now to create your public profile, share photos, and comment on other photos.
Check out our brand-new SHOP GALLERY and JIGS GALLERY. Get inspired and then post pictures of your own work.
CURRENT GALLERY CHALLENGES:
Show Us Your Drawers
Got Jigs? Tip Top Tables Scraptacular Holiday Gift 2009 Cure for the Common Cabinet
Classical Style
Wood Turning Projects
Creative Bookcases
Build Outside the Box
Tool Chests and Cabinets
Built-In Furniture
Exposed Joinery
Reclaimed Lumber Projects
Holiday Gifts 2008
HOW TO LOGIN:
Step One: Create Your Profile or Login
Step Two: Post Pictures of your Furniture or Shop or Jigs.
Step Three: View Your Page
Join Woodworkers Like You
271803 woodworkers have joined Fine Woodworking. Create your profile and join the Fine Woodworking community!
Create your profile now!




