Reader's Gallery

showing 1 - 32 of 80 posts matching clock [X]
1 2 3 Next >

Sort By:

Tall Case Clock

brucep, member | January 30th, 2012

A tall case clock reproduction of one by Gardner Parker currently in the museum at Old Sturbridge Village. Dial painted by Kathi Siefert and movement from David Lindow - both of whom are...

view details

small clock also for the lions club christmas Auction

dads66, member | December 19th, 2011

Small clock also made for the lions club christmas auction, I try and build several pieces every year and donate them to the lions club for there Christmas Auction. Is built from cherry also cut in...

view details

Tall Clock for lions Club Christmas Auction

dads66, member | December 19th, 20112 comments

Tall Clock made from Cherry cut in our home town and milled by myself was built for the lions club christmas auction for the blind.

view details

Anniversary Clock

CMaxNavy, member | November 10th, 20111 comment

This is my 9th clock - M9 - Anniversary Clock. It was designed as a gift for a friend's 20th wedding anniversary. All of my previous clocks have been large and weight driven. My experience at craft...

view details

Norwich Regulator

GrayGoat, member | October 24th, 2011

Furniture does not need "Legs" to be furniture. It just need that classy personalized look. This is a clock I started 30 years ago and now finished only after retiring. The clock is from plans...

view details

Some of my work done at North Bennet Street School

ACCustom, member | May 26th, 20113 comments

All work done while at North Bennet Street School to see more pics go to http://accustomfurniture.blogspot.com/

view details

Shaker Wall Clock

benchslave, member | May 10th, 20114 comments

Shaker wall clock made of cherry, finished with one coat of garnet shellac and two coats of wipe-on poly. I used sliding dovetails to join the top and bottom shelves to the sides.

view details

Hickory Dickory Clock

jbschutz, member | May 5th, 2011

Hickory with Padauk accents. This box has bedside or desktop storage and a clock, too. Approx. 4 x 6.5 inches with a lift-off lid. Battery operated clock has a glow-in-the-dark face...

view details

The Grandfather Clock

rkleeman, member | May 4th, 20115 comments

When I first saw this clock I knew it was going to be quite the "project”. The piece had been stored unused in the basement for over 30 years. Given the humidity in the basement itrsquos...

view details

repairing antiques ... an appreciation

danmosheim, member | April 27th, 20113 comments

a post about restoring an aaron willard clock

view details

Coffin Grandfather Clock- Chronos Muertos!

Bizob, member | April 23rd, 20111 comment

The idea for this came about when I was building a coffin shaped shelf for a friend of mine. I designed the clock myself and purchased the clock componets from Klockit. I started with the basic...

view details

PT Cruiser Clock

scrollman, member | April 23rd, 2011

Cruiser made of red oak. Base is red oak with walnut flame inlay.

view details

Birthday Clock

bmprigge, member | November 10th, 2010

Made this clock for my father for his birthday. He just got a promotion and finally has his own office so I thought I'd make him a little something to adorn it. It was really simple to...

view details

Wedding Clock

mjbclock, member | May 6th, 2010

This is my 23" tall Cherry Shelf clock of my own design with a dial that is handpainted in a Wedding theme. It has a Hermle 8 day keywound bell movement and a 10x10...

view details

How to Add Quarter Columns to Your Furniture

BetsyE, member | February 17th, 20102 comments

The fluted quarter columns that adorn the front corners of classical furniture are not as difficult to create as they look. Especially if you use Jeff Headley's method. Instead of turning a whole...

view details

Mantle Clock

Dsturningspot, member | February 4th, 2010

This clock was made with Norway maple (Acer Platanoides) and Black walnut lip (Juglans nigra). The face was cut from 3/4"x 12"x 3" stock and was shaped with the bandsaw then the side and top edges...

view details

Grandfarther Clock

Paulbartlett, member | January 16th, 20106 comments

This Clock is 94"h x 30"w x 17"d Made from Black Walnut and Tiger Maple. The beaded Columns were turned on the lathe and then Beaded on the router table with an indexing fixture I made.

view details

Tall case clock commission

donkondra1, member | January 10th, 20102 comments

The client supplied the clock works and asked to have a case made. From our discussions it was clear they wanted maximum visibility of the works. Along those lines the top is a frame with...

view details

Grandfather Clock

mokusakusensei, member | December 27th, 20091 comment

I have made a number of clocks that are traditional in design, but for myself I like the simple lines of the arts and crafts. This clock has all draw bore tenon joints. I used quarter sawn red oak...

view details

Trapezoid Mantle Clock

woodenhorse, member | December 25th, 2009

Bubinga and Spalted Maple with Walnut pins. Back is bookmatched Bubinga. Finished with Natural Danish Oil and wax. Made as a gift for a kind neighbor.

view details

Tammy's Wall Display

Fred46, member | December 24th, 20093 comments

My daughter-in-law collects milk glass. This country style wall display is based on a magazine plan with the primary change being the lapped back panels in lieu of plywood. It features a...

view details

Mantle Clock

nedmoore, member | December 24th, 2009

Three Mantle Clocks for family in Memory of my son, Edward N Moore, Jr. 11/21/1965 - 12/25/2008

view details

Marquetry Clock

RJ1403, member | December 22nd, 2009

This is a Christmas present for my wife this year -- she has always been in love with clocks having Westminster chimes. The clock face was created from contrasting veneers along the design...

view details

English Style Bracket Clock (Mahogany)

HTHSSNTHTSHT, member | December 22nd, 20094 comments

I designed and built this Mantel Clock for my inlaws this holiday after looking up some pictures of old english style bracket clocks. They love old-fashioned style things, especially made with...

view details

Fiqured Western Maple Grandfather Clock

kb182, member | December 17th, 20095 comments

Made this for my wife for Christmas.

view details

Shotgun Clock

elegantwriting, member | December 2nd, 2009

Pens and clay pigeon clock and base of Congola Elves, handcarved shotguns one from Ebony one from Bocote

view details

Square One Clock

CB1010, member | November 28th, 20093 comments

Clock with continuous second hand made from scrap black walnut from a local woodshop with ebony inlays and holly face. Finished with Danish oil. 11" x 11" x 4"

view details

Wooden Gear Clock

tonyrays, member | November 28th, 20091 comment

Wooden gear clock made of Walnut, Maple and Brass

view details

Mantel Clock

Woody1202, member | November 23rd, 20091 comment

I made this as a Christmas gift for my sister. It is Honduran mahogany with a ruby shellac finish. The top coat is tung oil.

view details

steam-punk clock

AlexSutula, member | November 17th, 20092 comments

This piece was commissioned for UNIX founder Doug Mcllroy, to be present to him at the 2009 Linux festival in Columbus, OH. I designed the casing of the clock and executed the woodworking. The...

view details

Grandfather Clock

Drifting350z, member | November 15th, 200914 comments

Grandfather clock is made of cherry,Tie is tiger wood,birds eye maple with trim of wenge wood.Weights are also made of wenge wood

view details

Wedding Clock

TwiceMeasured, member | November 6th, 20093 comments

I wanted to give my nephew and his new bride a wedding gift that would last a lifetime. I decided that a clock would serve to not only represent their time together but mean something...

view details

showing 1 - 32 of 80 posts
1 2 3 Next >

An application error was encountered.

Severity: Warning

Message: file_get_contents(http://custommade.com/feeds/xml/?keyword=wood&count=4&imgsize=150) [function.file-get-contents]: failed to open stream: HTTP request failed! HTTP/1.1 404 NOT FOUND

Filename: libraries/Module.php

Line Number: 1954

Array

Welcome to Fine Woodworking's Readers Gallery,
an online photo community where woodworkers like you can share photos of all your woodworking projects. Log in or register now to create your public profile, share photos, and comment on other photos.

Check out our brand-new SHOP GALLERY and JIGS GALLERY. Get inspired and then post pictures of your own work.

CURRENT GALLERY CHALLENGES:
Show Us Your Drawers