Reader's Gallery

showing 1 - 32 of 952 posts matching cherry [X]
1 2 3 Next > Last

Sort By:

Cherry Bench

Odrisan, member | June 16th, 2013

This cherry bench was the last project I started in my Georgia shop. Completed it here in St. Louis. It's solid cherry with mortise and tenon joinery. Aniline dye and hand rubbed shellac...

view details

Chippendale Chest on Chest

jcswoodworking, member | June 8th, 20133 comments

Reproduction of circa 1780 Chippendale cherry Bonnet-Top chest-on-chest owned by C.L. Prickett, antiques dealer. My wife and I saw the piece at the Philadelphia antiques show in 2010 and loved its...

view details

Eva's Cradle

woodtoes, member | May 28th, 20133 comments

Cradle I built for my youngest daughter. I was lucky to find these beautiful wide silver maple boards to construct body of cradle. Base is cherry and pivot points are ebony.

view details

This table was inspired by two pieces of cherry that had a similar curve in sapwood. Although from the same board, they were about 6' apart from each other. Maple binding added nice definition to the...

view details

Cherry bookcase with "floating" top

corymickelson, member | May 25th, 2013

This is my first woodworking project I designed myself. Its cherry for the main carcase, pine ship lapped back, and an oak top dyed black. This was my first venture into knife hinges, which went...

view details

Shaker No. 3 dining chair

Chuck_Griffith, member | April 21st, 20131 comment

Shaker chairs ranged in size from 0 to 7, so the No. 3 is at the small end of the scale. However, it makes for a fine dining chair, especially if the room and table are relatively small too. For...

view details

Hall Mirror and Coat Rack

iowadave, member | April 21st, 2013

Mirror and coat racks were made from cherry. The design comes from Woodsmith magazine. All moldings were made my hand. I added the side coat racks.

view details

Shaker Round Stands

neobassman, member | March 29th, 20131 comment

I have always admired this timeless, classic, Shaker stand. While the design dates from the early 1800's, it still looks very contemporary. These are near-reproductions of the original now...

view details

Shaker Inspired Cherry Bed

neobassman, member | March 29th, 2013

This project for our guest room is based on tradiational Shaker beds but is my own interpretation. Turning the cherry posts was great fun and used the absolute maximum length of my Delta midi lathe...

view details

Cherry Burl Bowl

CowboyKenny, member | March 25th, 2013

Bowl carved using an Arbortech carving wheel on a grinder. Finish up with sanding disks then curved scrapers. Watco Salad Bowl finish.

view details

Furniture

Dustymid, member | March 16th, 2013

Dutch Pie Table is an old idea for a piece of furniture to have multiple uses; a round, half round or quarter round table with the remainder sections as shelves. Use it as storage shelves , then at...

view details

Cherry Shaker Sofa Table

cop154, member | March 15th, 2013

American Cherry sofa table in the Shaker style. Front edge has a slight radius (1" over length). Construction is mortise and haunched tenons. Finish is 2 coats BLO, 4 coats of garnet shellac (1 lb...

view details

Dragon Process - 4 slides

Pontic, member | March 15th, 20131 comment

Sixteen foot column made with 3/4" Solid Cherry with lock-mitered joints. Dragon made with 2" Solid Cherry stock. Mounted starting 7 feet off the floor. Dragon is 78 inches long.

view details

Cherry TV Stand

GarageWoodworks, member | March 6th, 20133 comments

Cherry with tiger maple drawer fronts. The sides of the drawers are the sides of the stand. SketchUp file (doesn't include joinery or drawer slides and other minor details) can be found hereWatch...

view details

Shaker counter stools

Chuck_Griffith, member | March 4th, 20131 comment

I'd be embarrassed to tell you how little I charged for these. I figure they're pretty simple, so don't overdo it. However, because of the way I position holes for the rails and stretchers, the legs...

view details

9 drawer Figured Cherry/Hard Maple Dresser

sjama6678, member | February 18th, 2013

Took me a while to complete…in between other jobs… from milling the lumber to the final coat of wax, it was a very satisfying project. Solid wood throughout, except side panels (1/4" Maple Ply...

view details

Asian and Greene and Greene inspired hall table

NikBrown, member | February 17th, 20135 comments

I've been fairly active in the online woodworking community for a couple years but have never really produced anything I would classify as furniture. I began working on this table about 7 months ago...

view details

pennsylvania cherry table

PaulMelniczak, member | February 6th, 2013

This cherry table has maple inlays and ash stringing, all from Carlisle, PA. The curved drawer fronts are rip sawn and laminated. The finish is linseed. This was my first project of this sizeso...

view details

Simple dovetailed box

jlecomte, member | January 20th, 2013

Simple dovetailed box - cherry and fiddleback maple.

view details

Giving Tree

ThunderHunter34, member | January 9th, 2013

This bandsaw box was a gift to my youngest daughter to store her treasures. It is made from a cherry tree in our backyard that came down in the wind. Most of the tree wound up as fire wood but I...

view details

Miniature No. 0 Shaker rocker

Chuck_Griffith, member | January 8th, 20131 comment

I make full-sized Shaker chairs. My wife collects miniature chairs. So for Christmas this year I figured a shrunken Shaker piece might do the trick. The result is an exact "half-size" version of the...

view details

Shaker blanket Chest

Chuck_Griffith, member | January 3rd, 20131 comment

Shaker blanket chests usually have a flat top and one or two drawers that pull out from the wide side, so this one is a little different. The arched top was made by coopering slats of cherry whose...

view details

Cherry Bathroom Vanity

hughesmr, member | December 13th, 20122 comments

This is my cherry bathroom vanity. It took ~9 months to make but mainly because I started, then took a "break" to remodel my bathroom 100%, and when done - went back to finishing the vanity. I...

view details

Curved Cabinet-on-Stand

FWW_Gallery, member | December 13th, 20121 comment

Woodworker: Nicholas NelsonWinner of Best in Show, this curved cabinet was inspired by the coastal scenery of British Columbia. Nelson said he designed it to convey a sense of motion. The cabinet 13...

view details

Clamshell-Action Cabinet

FWW_Gallery, member | December 13th, 2012

Woodworker: Aurelio BolognesiBolognesi has always admired the clever clamshell-action cabinets from the 1930s that pivot open to reveal storage inside a plain case. He decided to build one, but he...

view details

The W Cabinet

WDWRKR631, member | December 12th, 2012

I built this cabinet to store my coffee k cups. The carcas is Curly Cherry. The doors were made from a book matched set of Red Elm boards. The interior has an adjustable shelf.

view details

@ Drawer file cabinet with Barrister Book shelf

Garver, member | December 8th, 2012

Cabinet made from solid Cherry

view details

Tall Wall Cabinet

WDWRKR631, member | December 5th, 20122 comments

This cabinet was built for miscellaneous storage. The carcas is Curly Cherry. The door is a carved Mdf laminated to Maple & has an Ebony pull. I used a Fir back panel to help lighten up the interior...

view details

Cherry kitchen cabinets

ken R, member | December 4th, 20124 comments

This is a cherry cabinet kitchen that I recently completed. It has beaded face frame cabinets, with inset doors. The drawers are made of hard white maple with half blind dovetailed joints. They have...

view details

Bottle Opener

GarageWoodworks, member | December 3rd, 2012

Watch the build video!

view details

The Four Year Project

MarkAReed, member | November 19th, 2012

155 gal. bow front salt water aquarium stand This project took forever to build. It all started when a neighbor asked me to install a bay window for them. He had his own aquarium business, like that...

view details

Margaret

Alashop, member | November 18th, 20121 comment

I liked an old picture of my mother in law so I cut one out of cherry. I made the frame from the same board and used the sapwood on the inside edge. Finish is a sprayed lacquer and the picture is...

view details

showing 1 - 32 of 952 posts
1 2 3 Next > Last

Advertise here for as little as $50. Learn how

Welcome to Fine Woodworking's Readers Gallery,
an online photo community where woodworkers like you can share photos of all your woodworking projects. Log in or register now to create your public profile, share photos, and comment on other photos.

Check out our brand-new SHOP GALLERY and JIGS GALLERY. Get inspired and then post pictures of your own work.