Reader's Gallery

showing 33 - 64 of 274 posts matching chair [X]
< Previous 1 2 3 4 Next > Last

Sort By:

Charles Rohlfs 1898 Desk Chair Mahogany

woodbridge, member | August 13th, 2012

This is the second reproduction of Rohlfs iconic desk chair that I have attempted. A few months ago on a trip to New York I had the opportunity to view the original Rohlfs chair at the...

view details

'Rocking Chair'

Mike_McCarthy, member | August 13th, 2012

This is a rocking chair I designed and constructed for my mums 65th birthday. Curved Lamination was relatively new to me. I have always been a firm believer in heavy strong and durable pieces of...

view details

Sculpted Cherry Bar Stools

Canadian_Woodworks, member | July 31st, 20123 comments

A beautiful yet comfortable bar stool designed and built to last generations. With its hand sculpted seat and great lumbar support you'll never want to get up. Shown in Canadian Cherry approximately...

view details

furniture

zuzaraden, member | July 22nd, 2012

furniture

view details

Bastogne Walnut Bench

roubenm, member | July 18th, 2012

Bastogne Walnut Bench. Bastione walnut is the rarest of all walnut woods, is a natural cross between California English Walnut and California Claro. Bastogne trees grow very large and the wood is...

view details

Sam Maloof Inspired Walnut Sculptured Rocker

woodbridge, member | July 12th, 20121 comment

Completing a Maloof inspired rocking chair has been on my to-do list for about 18 months now and I purchased the walnut for it about a year ago. I'm giving this one to my son. I have built two other...

view details

Tom Begnal's Adirondack Chair

mdcon, member | July 12th, 2012

Here's my version of Tom's Adirondack Chair. It was a lot of fun to make. I made it with Aromatic Red Cedar with a green base to match a bench I re-did last year.

view details

western mountain windsor

dvtlfntr, member | July 10th, 2012

I designed this chair on a napkin while trying to capture the Montana mountains and way of life. Like a twisted ranch fence or a horse. The process took atleast eight months from conception to...

view details

Effigy of the Mind

rjscottdesign, member | June 16th, 20123 comments

The 'Effigy of the Mind' was created to emphasise the creative thought of the mind. The seat profile was the only pre determined element of construction. The creation that followed was built up one...

view details

Jafu Chair

Dimisco, member | June 15th, 20122 comments

It is a chair made in Aniegre wood and finished with oil. No screws or metallic parts, just wedged tennons. A design created from the idea of put together a simple but interesting shape and...

view details

kid's rocking chair (+free plans)

mikeasaurus, member | June 9th, 2012

Just a simple 5-piece rocker held together with 2 tension bolts, easily colapsible for storage and transport. This rocker was based on Jeff Miller's free plans available online, I modified the plans...

view details

Computer Desk

Pallirondack, member | June 8th, 2012

A friend of the family does home schooling and she needed a desk for the kids to use. With casters on the bottom, its mobile and sturdy. Made 100% from recycled pallet wood.

view details

Double Pallirondack Chair

Pallirondack, member | June 8th, 2012

My wife asked if I could make a coffee table for her, suggesting I use pallets. Little did I know I would not only make the coffee table, but also two Adirondack-style chairs, an end table for my...

view details

rockerboo

kolwdwrkr, member | May 29th, 20121 comment

This is a rocking chair out of bamboo. It took nearly 3 years to complete because I always seemed to be busy and didn't have time to work on it. My friend Neal Unger helped with some of the work so...

view details

My modification of a Fine Woodworking Windsor Rocking Chair Plan called "Plans Change"

davidcarve, member | April 26th, 20122 comments

I bought a Fine Wood Working Windsor rocking Chair Plan a few months ago online. I altered the plan to make it recognozeable but non functional for fun. It is made from White Oak, Walnut...

view details

Tanzanian Throne Chair

woodbridge, member | April 12th, 2012

This is my interpretation of a Tanzanian Throne Chair. It was built for a fund raising charity auction for the CPPS Precious Blood missionaries who do work in Tanzania building schools and water...

view details

Charles Rohlfs 1898 Desk Chair Reproduction

woodbridge, member | April 12th, 201210 comments

This is the second of three Charles Rohlfs chairs that I am trying to reproduce. I have made a number of chairs following this style of this chair, but decided to try to make a more faithful...

view details

Chair footrest

Cres9, member | April 7th, 2012

Chair footrest

view details

Honduras Mahogany Bishops Throne

fat418, member | March 25th, 20121 comment

This is the Bishops Throne it was built in 1986 using genuine Hodurous Mahogany. It is still on display and in use at the Saint Andrews Greek Orthodox Church on Kendall drive in Miami, Fl. It is...

view details

Charles Rohlfs Rocking Chair

woodbridge, member | March 25th, 20121 comment

One of my retirement objectives is to reproduce a number of Charles Rolhfs’ decorative chairs. This is my first, a reproduction of Rohlfs’ “1899 oak rocking chair”, a...

view details

Bar Stool

Dimisco, member | March 24th, 2012

It was made with steam bent laminated ash. And the back side of the backrest in in Wengè.

view details

Newport Chippendale Corner Chairs

MWolfe, member | March 2nd, 2012

These two Newport Chippendale Corner chairs or "roundabout chairs" are based on a few different examples of chairs made by John Goddard in the later half of the 18th century. Made of solid mahogany...

view details

Girls toy chest

james3one, member | February 27th, 2012

Made for a friend. All of the 16 mortise and tenon joints were cut by hand and the chest boards were jointed with a very old plane. Corners were mitered and reinforced with maple keys...

view details

Sam Maloof Rocker

krob, member | February 15th, 20121 comment

I spent a day with Sam Maloof in the Mid Eighties and saw his work and watched him work on a project. I never dreamed I would make a project like that, but I have and it is with a great sense of...

view details

The Gaines Chair Project

Johnzshopnstuff, member | February 5th, 20122 comments

Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 ...

view details

Maloof rocker

rafra, member | January 14th, 20123 comments

My first stab at a Maloof rocker. It came out well. Overall I'm very happy with the comfort and flow, but I'll have a few tweeks on the next one.

view details

Hickory Rocker

CowboyKenny, member | December 23rd, 20113 comments

This rocker is a copy of one that my Grandfather used to use when I was a little fella. His rocker had been left out in the elements for many years and was rotted beyond repair. I built mine out of...

view details

Goddard Corner chair

Historick, member | December 17th, 20111 comment

Here is one of my projects that required me a lot of concentration and learning in the manual tools. The most difficult were to carve ball and claw feets. I learnt the art of furniture on television...

view details

Arts and Crafts Dining Chairs

Turbochief, member | December 12th, 20117 comments

The dining chairs were built from a Kevin Rodel plan published in FWW and available from Taunton. The chairs are solid cherry with some wenge Greene and Greene style accents. The upholstery is 2...

view details

Floating Chair

Bluecab, member | November 24th, 20112 comments

A recently completed design exploration. Maple bent laminations with walnut accents and held together with 1/2" birch dowels and marine plastic resin. Thanks' for looking!

view details

Carved Chair

aquarium, member | November 21st, 20111 comment

This chair is a copy of a dilapidated old family piece which succumbed to the ravages of woodworm. The pattern for the carving was drawn full size and applied to the timber with wallpaper paste.

view details

Elegant Chair designed by Matthew Teague.

littlej, member | October 23rd, 20115 comments

H: 40 in. D: 17 In. W: 19 in. So far this is the first one of six chairs I started back 6 months ago. They are made of red oak and the joinery is floating tenon, same as the plan. All the surfaces...

view details

showing 33 - 64 of 274 posts
< Previous 1 2 3 4 Next > Last

Advertise here for as little as $50. Learn how

Welcome to Fine Woodworking's Readers Gallery,
an online photo community where woodworkers like you can share photos of all your woodworking projects. Log in or register now to create your public profile, share photos, and comment on other photos.

Check out our brand-new SHOP GALLERY and JIGS GALLERY. Get inspired and then post pictures of your own work.