|
|
|
|
Reader's Gallery
Post your project Subscribe to RSS feed
A Hearts and Flowers Vase
This small vase is about 9 inches tall and is made of birdseye maple, bloodwood, Bradford pear, and red and black dyed veneer in thin accent bands. The very thin (about 0.07" thick) Bradford pear...
view details
Hand Carved Cherry Salad Servers
These are a hand carved set of cherry salad servers. They are finished with mineral oil.
view details
THE WORLD
I USE HAND TOOLS AND A ROUTER ATTACHMENT FOR A DREMEL TO ACCOMPLISH THE DETAILED CARVING INTO THE TABLE TOP. I THEN PUT INDIVIDUAL PLACES TO SIT TO ADD A DESIGN ELEMENT. I WILL POST THE...
view details
Chippendale wing chair frame
2 commentsMiniature(childrens) size wing chair frame with Philadelphia style ball and claw foot. Made from mahogany, soft maple(secondary), and poplar(secondary). Brackets were added to support...
view details
Sleigh bed
Black walnut king size sleigh bed with hand carved beeding. Curved laminated head board with walnut crotch veneer. A traditional style with a few adaptations (kennedy sleigh footboard) for the...
view details
auto aristocracy #1
This is another piece I completed in my undergratuate years. I was trying to fuse classic furniture styles with classic automobile forms. It is constructed of solid poplar, and mahogony accents, then...
view details
auto aristocracy
This is a piece I completed in my undergratuate years. I was trying to fuse classic furniture styles with classic automobile forms. It is constructed of solid poplar (including a coppered back), and...
view details
Iron Table
While camping, my wife and I came across a 15' - 3"x12" lodged on the banks of a river. We wrestled it out and took it home. At the time we didn't have much for furniture and had been...
view details
Chris & Morgan's Bubinga Adventure
8 commentsThis was a joint project between myself and Morgan (AZMO). I was responsible for carving the edge and smoothing the surfaces. With the reversing grain, this translated to much...
view details
Writing arm windsor chair
1 commentPine seat, maple turnings, oak spindles, arm and crest rail. Oil over milkpaint finish.
view details
Comback windsor arm chair
Tall back Windsor finished in milk paint from the Real Milk Paint Co. Pine seat, maple legs, stretchers and arm posts, oak crest rail and arm as well as oak spindles.
view details
Wine Glass in Wood
Walnut and Maple laminated together with a carved spiral stem. Made in 3 pieces and glued together. Finished with oil. It was made before the bottle was opened and the bottle is used for size...
view details
Connecticut highboy
1 commentIn cherry, finished with oil and shellac. Two drawers have fan carvings. The sides of the lower case are single boards. The dovetails are hand cut and the piece has 158 dovetails in total. The upper...
view details
Various projects
2 commentsThese are just afew of my pieces I have designed and built over the past year. I enjoy mixing the wood, fabrics, leathers and glass to create a custom piece.
view details
ALL WOODEN CHOPPER
1 commenthI, I made this all wood chopper, for my love of choppers and wood working. every single piece of this bike is wood, hand made by me. it is 25'' long 7'' wide 8'' tall , made from walnut and...
view details
Platter and Bowl, Commission for Marine Biological Association(UK) conference
Two turned pieces commissioned by Aberystwyth University (Wales) for their Marine Biological Association Conference. Platter approx 14" diam x 1 1/2" deep. Bowl approx 7" diam x 4" deep.
view details
kumete
6 commentsA kumete (bowl) constructed using traditional pacific island joinery techniques. Sapele, beech, chestnut, tallow wood, sisal lashing.
view details
Hatta in Prison
4 comments'Hatta in Prison' based on the illustration by Sir John Tenniel of Lewis Carrol's 'Alice Through the Looking Glass' and following the work of Ian Norbury. Carved in limewood, walnut and ebony. Plinth...
view details
Lecturn / Shtender
1 commentThis Lectern is made from African Walnut and Mahogany. The top is carved with the Star of David and indented with smaller stars for the field and border. I darkened the Walnut with a dye stain to...
view details
Oak dresser and mirrot
1 commentThis oak dresser is 60x19x35, alldrawers are matched from single boards, the mirror has mahogany inlay and is in the laminated uppers sections. the center mirror has a carved mahogany...
view details
Cherry Fireplace Mantle
This was a modified replica of a friend's antique mantle. Took a lot of photos of the original and scaled it to fit my fireplace and ceiling height. Got talked out of hand carving a concave Newport...
view details
box for christine
2 commentsA box made to celebrate the fiftieth birthday of an old friend rediscovered after 34 years. Box: Sides - walnut, Base - ripple figured olive ash Trays: Sides - figured maple, Base - JarrahLid...
view details
Curved Door Chip Carved Jewelry chest
5 commentsThis is a rather large Chip Carved Jewelry Chest that has curved Side Doors. The primary wood is basswood and the dark wood is Mahogny. There are six drawers that are coated with a...
view details
Desk Kaddy
2 commentsThis piece is a heavily chip carved Desk Kaddy. The prime wood is butternut with some basswood. It conains 5 drasers behind the center doors, 3 drawers in the top section and mail...
view details
Sheet Music Chest
6 commentsThis is a chip carved chest that is design to hold sheet music. It is made entirely of basswood and the finish is 6 coats of semigloss polyurethane. The drawers are...
view details
Pie Crust Tray
2 commentsFirst attempt at a pie crust carving. The rim is not as dramatic as typical tables, but I learned how to do it. Working on more impressive rim plan for next one.
view details
Study Chair
Here is a chair I made for my wife out of oak. All of the joinery is done with pocket holes. There are four 1" dowels that help hold it together as well.
view details
Whale Tail Stool
4 commentsThe Whale Tail Stool was inspired by the work of Kintaro Yazawa FWW #191. There is a video of me working on the stool ...
view details
Old Man Winter
1 commentHere is something a little different. This is a Basswood mantel I carved about 2 years ago. The face is Old Man Winter. It was a fun project but a little difficult because I needed to keep the...
view details
|
|
Welcome to Fine Woodworking's Readers Gallery,
an online photo community where woodworkers like you can share photos of all your woodworking projects. Log in or register now to create your public profile, share photos, and comment on other photos.
Check out our brand-new SHOP GALLERY and JIGS GALLERY. Get inspired and then post pictures of your own work.
CURRENT GALLERY CHALLENGES:
Show Us Your Drawers
Got Jigs? Tip Top Tables Scraptacular Holiday Gift 2009 Cure for the Common Cabinet
Classical Style
Wood Turning Projects
Creative Bookcases
Build Outside the Box
Tool Chests and Cabinets
Built-In Furniture
Exposed Joinery
Reclaimed Lumber Projects
Holiday Gifts 2008
HOW TO LOGIN:
Step One: Create Your Profile or Login
Step Two: Post Pictures of your Furniture or Shop or Jigs.
Step Three: View Your Page
Join Woodworkers Like You
283417 woodworkers have joined Fine Woodworking. Create your profile and join the Fine Woodworking community!
Create your profile now!
