Reader's Gallery

showing 353 - 384 of 542 posts matching cabinet [X]
First < Previous 10 11 12 13 14 Next > Last

Sort By:

Small Wall Cabinet

nznix, member | May 25th, 2009

Small wall cabinet in Ash and Walnut. This was a learning exercise in Frame and Panel construction at the 'centre for fine woodworking' in New Zealand.

view details

Double Tool Cabinet

Anacapa, member | May 22nd, 20097 comments

Made from walnut, birch, and Baltic birch, the cabinet has two sets of dovetailed, piano- hinged doors, one on top of the other, for more storage space. Tools can be mounted on all seven...

view details

Lonnie Bird Inspired Toolchest

Diviner, member | May 22nd, 200914 comments

This is a cabinet was inspired from a feature article and video clip in FWW about a secretary that Lonnie Bird built. This furniture style doesn't match the rest of my house, so I decided to make it...

view details

Saw Cabinet

woodker, member | May 21st, 20092 comments

Krenov style cabinet for hand saws. African mahogany, maple, lacewood, ebony. Hangs on inset french cleat. Project for Red Rocks Fine Woodworking School, Lakewood, CO.

view details

Plain Pine Plane Cabinet

Matthew Lawrence, member | May 21st, 20093 comments

This is a simple Shaker designed cabinet in plain old construction grade southern yellow pine. It is finished so as to emulate a pumpkin pine finish: clear stain, maple stain...

view details

Arts & Crafts Quartersawn Oak & Waterfall Bubinga Wine Bar

lundbergbros, member | May 20th, 20091 comment

My brother and I made this out of quartersawn oak and waterfall bubinga veneer over mahogany. The top holds 14 wine glasses. The center holds 25 bottles of wine. The center is a pull out tray with...

view details

Shop Tool Storage Cabinets

HenrySr, member | May 19th, 20094 comments

Cabinets built to organize and protect tools.

view details

Mahogany Egyptian Dresser

krob, member | May 18th, 20092 comments

This dresser was a nice challenge, with the angled sides, the cove molding cut on the table saw and the drawer pulls made on my new lathe. Finish is five coats of Dalys Profin,a hard to find but...

view details

chest of drawers

jasonmcbain, member | May 17th, 2009

This Dresser is made of 100 year old Walnut boards salvaged from a stone hauling trailer. The top is Butternut with a Walnut breadboard. There is a hand scraped Walnut cock-bead around...

view details

chest on stand

jasonmcbain, member | May 17th, 20096 comments

This cabinet was made from Cherry, milled by the recipient’s deceased grandfather, with spalted, curly Maple veneered sides and doors, made from wood salvaged from a pallet. The doors...

view details

Portable collapsable bar

Brianosaurus, member | May 15th, 2009

This is a portable bar I built to take to Burning Man and Rally America Rallies. It is from reclaimed wood that is either Maple or Redwood. The top and shelp lift out and the wings fold in for...

view details

Cabinet II for Sheet Music

AlanBYoung, member | May 15th, 20091 comment

Here is a Sheet Music Cabinet . Materials and constructions details: Frame:Sapele. Side Panels -Anigre veneer with Sapele diamond inlay. Drawer front and Door Panel-Maple veneer with Sapele and...

view details

Tool Cabinet

realmccoy01, member | May 13th, 20097 comments

This is a recently completed tool cabinet. The design is my own with lots of inspiration from Jim Tolpin's "The Toolbox Book". The cabinet is walnut and the drawer faces are flame maple.

view details

Marquetry tool cabinet

kterpening, member | May 13th, 200915 comments

Ash tool cabinet with marquetry depicting the journey from live ash tree to lumber to finished tool cabinet.

view details

Gadget Charging Station Plus

kingwah, member | May 13th, 2009

Here is my version of the new necessity for the modern household: a gadget charging station. This one incorporates a mail sorter/bill box (upper left), a cubby for wallet and watch (upper right), a...

view details

Hanging Tool Cabinet

goodwood, member | May 11th, 20094 comments

Woods used: cherry, walnut, wormy chestnut, and bloodwood. Handcut dovetails and finger joints. Sloped plane storage lifts up to reveal 2 shelves. Chisel racks are removable. Hand carved Latin...

view details

Country Pine Painted Hutch

2clicksoff, member | May 10th, 2009

Copied from a store display unit that my wife liked. I asked if I could measure it up as I was a New Yankee workshop apprentice. They agreed. Came across some good pine shelving that another retail...

view details

Custom Wine Cabinets

stevek66, member | May 8th, 2009

450 + Bottle,Custom Wine Display cabinet.Made with Sapele.Finished in Laquer

view details

SIde Table in Maple

stevek66, member | May 8th, 2009

Maple Sidetable with Spanish Cedar Maple leaf inlays.Hand cut dovetail drawer,Sapele drawer knobFinished in Blonde Shellac and wax

view details

Upgraded Mitersaw Station - Times 3 - Times 16

bricofleur, member | May 7th, 20093 comments

This is how I have upgraded my mitersaw station. Made out of 3/4"-thick MDF, this 16 drawers 8'-long X 18"-deep X 8"-high nest raise up the station at a confortable height for my 6' tall person...

view details

Chimney Cabinet

myimpala, member | May 5th, 20091 comment

This Chimney Cabinet is constructed entirely of salvaged shipping boards. The logo of the manufacture (IKO) is visible above the middle shelf and on the inside door stile by the lower hinge. The...

view details

Asle Furnitures

Pedestal, member | May 5th, 2009

I am an retired engineer that use my hobby to make different furnitures to my family, children and grand children. I am very fund of Woodworking Magazine thar brings me a lot of inspiration.

view details

Bubinga & Maple Credenza

SFWoodworks, member | May 1st, 20096 comments

This is from my wine cabinet series. This piece though made for the show of The Furniture Society Conference held at Victoria, BC., Canada, Frame is bubinga, door panels are maple...

view details

Bryanappletondesigns.com

bappleton01, member | May 1st, 2009

Various colorful, whimsical cabinets of architectural salvage.

view details

Recycled Pen Yan boat

Livermore, member | April 30th, 2009

Cabinet made from 1937 Pen Yan boat front half and other vintage recycled material, I think this boat fond a good way to retire. Working Green and loving it.

view details

Adirondack style cabinet made from recycled wood

Livermore, member | April 30th, 20091 comment

My cabinet is made from recycled wood, birch bark panels, branch work and deer antler handles. This cabinet is my interpretation of a up state NY Adirondack style. Always working green and loving it.

view details

endtable

paulski, member | April 30th, 2009

made from BC fir skids from factory across road. photo was taken predigital

view details

Hutch, milk-painted with cherry counter

Chuck_Griffith, member | April 30th, 20093 comments

A friend of mine saw a version of this in a store, but needed a slightly smaller one to fit his dining room. The maker wouldn't oblidge, so he said "help" and handed me a Xerox image of it. I went to...

view details

Chimney Cabinet Made From Old Roof Boards

mjmetcalf, member | April 29th, 2009

I helped a friend of mine put a new roof on a few years ago. We tore off a couple layers of shingles, cedar shakes, and these boards that the shakes were nailed to. We saved the...

view details

Kitchen cart

Yiannaki, member | April 29th, 2009

I built this American chestnut kitchen cart from lumber which I sawed and milled from logs found in a 100+ year old log barn on my daughter's property. The knife/utensil holder consists of a...

view details

DEADHEAD CYPRESS CABINET

deadhead, member | April 29th, 20091 comment

The cabinet is 6 ft. tall with three circular glass shelves inside. Finish is Danish oil and polyurethane mix wet sanded from 320 thru 600 grit. Deadhead lumber is a term given to wood that has been...

view details

Shaker style hutch, milk-painted

Chuck_Griffith, member | April 28th, 20096 comments

Finished this today. Made a similar one as a Christmas present for one of our kids (posted 4/5) and liked it so much I made this one for us. Unlike the other (which, below the counter, had nine...

view details

showing 353 - 384 of 542 posts
First < Previous 10 11 12 13 14 Next > Last

An application error was encountered.

Severity: Warning

Message: file_get_contents(http://custommade.com/feeds/xml/?keyword=wood&count=4&imgsize=150) [function.file-get-contents]: failed to open stream: HTTP request failed! HTTP/1.1 404 NOT FOUND

Filename: libraries/Module.php

Line Number: 1954

Array

Welcome to Fine Woodworking's Readers Gallery,
an online photo community where woodworkers like you can share photos of all your woodworking projects. Log in or register now to create your public profile, share photos, and comment on other photos.

Check out our brand-new SHOP GALLERY and JIGS GALLERY. Get inspired and then post pictures of your own work.

CURRENT GALLERY CHALLENGES:
Show Us Your Drawers