Reader's Gallery

showing 1 - 32 of 166 posts matching bent lamination [X]
1 2 3 Next > Last

Sort By:

Muliti-Design Mirror

markbarabas, member | February 12th, 2012

Normal 0 MicrosoftInternetExplorer4 For this, my first solo attempt at veneer and marquetry, I took design inspiration from several woodworkers including Johanathan Benson, Paul...

view details

Carved wooden bench

Geocol, member | February 7th, 20121 comment

This is my latest project. The bench is made from Yakault and Ipil. Both timbers are recycled from old buildings. The seats and backs are carved from 55 mm thick stock. The arm rest...

view details

Andy's Box

carmyk, member | February 1st, 20122 comments

OK, so I know I'm not the only one to be inspired by Jeff Guthrie's lovely design (item 9815 in this gallery). Mine has Madrone (arbutus, if you are in Canada) and quilted maple veneers with walnut...

view details

Hall Table

roneil, member | January 23rd, 20124 comments

Entrance way hall table with curved front. Veneered top has book matched sectors of quilted sapele and paduck sector pattern bounded by bent laminate edging. Aprons are bent laminate with a...

view details

Hickory Rocker

CowboyKenny, member | December 23rd, 20113 comments

This rocker is a copy of one that my Grandfather used to use when I was a little fella. His rocker had been left out in the elements for many years and was rotted beyond repair. I built mine out of...

view details

Maple Walnut Cherry Box

woodbridge, member | December 22nd, 2011

This is the final of three boxes that I have made a christmas gifts. The box is sized to hold two bottles of wine (outside dimensions are 14×9 x 6” high). It is made of maple, a walnut...

view details

Modern Coffee table

tymann09, member | December 12th, 20112 comments

This is a modern/contemporary coffee table that I designed. I built it out of Maple and Cherry and used a Velvit oil finish with a wax coat on top. Some of the neat features it has is a 2-way drawer...

view details

Floating Chair

Bluecab, member | November 24th, 20111 comment

A recently completed design exploration. Maple bent laminations with walnut accents and held together with 1/2" birch dowels and marine plastic resin. Thanks' for looking!

view details

Art Nouveau demilune

canoeral1, member | October 30th, 20111 comment

I designed and built this during my second semester at Red Rocks Community College. It has about 200 hours in it, there is cherry, maple, mother of pearl, veneer, and a cast bronze sun that I...

view details

Super bright LED floor standing light

Rich67, member | October 5th, 20112 comments

Hi Folks, I thought I'd share this. I bought some strips of super bright LED's to make a floor standing light with them. Mainly to use up some scraps I had and to be able to read during the winter...

view details

Walnut Desk

na_nelson, member | October 5th, 20114 comments

Walnut Desk Air-dried Walnut, White Oak 30" H x 47.5" W x 22" D Desk inspired by a particular plank and a general love of Walnut and desks heh. The subtle curves made the drawer box a challenge...

view details

Rohlfs Inspired Desk Chair 3

woodbridge, member | October 2nd, 20111 comment

Rohlfs inspired desk chair #3. 50 ½ inches high, 15 ½ inches wide and 16 inches deep. I made this chair for my nephew who is has just moved into his first homenbsp...

view details

A tale of two chairs

YOUNGNICK, member | September 12th, 20111 comment

This is a story of how one design leads to another, and then another. It started with a cylinder cut in half and with the addition of a seat and the back, I sprayed it black to make sure I liked it...

view details

Contemporary Walnut Chair

Rich67, member | September 6th, 20112 comments

This is my first attempt at building a chair. I must admit it was quite tricky and I took quite a while thinking about the initial shape which changed a few times during its design. I probably over...

view details

China Hutch

corrinithian, member | August 19th, 20119 comments

China Hutch Nov 2010, Posted to FWW online kind of late, but better late then never

view details

Restored Thonet rocker

Antondeg, member | July 24th, 20111 comment

I picked up a Thonet Rocker for $15 at a yard sale. Not knowing what it was. The center ring was cracked and I only realised that when I get home. The cane was all in good order which made it...

view details

Rosewood & Maple Burl End Table

SFWoodworks, member | July 14th, 2011

This was an exercise in design. The shape of the legs and how they are oriented in the base are just a little unconventional. maple burl was not big enough to radius to match to the leading...

view details

The Allium Floor Lamp in Green

Castlewerks, member | June 27th, 20112 comments

The Allium Floor Lamp in Green This lamp is made by laminating thin strips of ash in a bending form followed by careful hand shaping. It’s then dyed a dark emerald green and finished with a...

view details

The Allium Floor Lamp in Walnut and Zebrawood

Castlewerks, member | June 27th, 20112 comments

Most of my designs begin as a general shape in my mind and as I develop the concept I start to think about color, texture and materials. My initial concept was the Allium in Green, but as I began...

view details

Throne

YOUNGNICK, member | June 24th, 20111 comment

This Throne is brought to you by the letter "h". Its a little known fact that I am old alumni of The Sesame Street School of Design, and its courtesy of them that I designed this chair and bring it...

view details

hall table

YOUNGNICK, member | June 1st, 20112 comments

A hall table veneered with macassar ebony and french polished. There is a central drawer made from ripple sycamore for the sides, base and back and Cameroon ebony ( jet black) for the front...

view details

Dream Rocker Reproduction

woodbridge, member | April 24th, 20116 comments

When I first saw the David Haig's beautiful dream rocker on the back cover of FW215 I had to try and build one. He is my first attempt. Without any dimensions to go by I prepared...

view details

4 place dining table and chairs and matching sideboard

YOUNGNICK, member | April 20th, 2011

Here's a lovely job I won. The man had been looking at thousands of sideboards until he decided he liked mine. He also needed a dining table and chairs to go with it, but didn't know what he wanted...

view details

Mahogany, satinwood, ebony foyer table

Michael_McDunn, member | April 19th, 20111 comment

Foyer table. Solid mahogany with satinwood and ebony inlay and feet. Base is resawn mahogany bent and laminated. This piece was custom handcrafted to reflect the client's extensive tool collection...

view details

Kaligrafia - a hall table

YOUNGNICK, member | April 12th, 20113 comments

Its a hall table that I'd been struggling to draw for a few weeks. I had the germ of an idea in my head but I couldn't get it nailed down on paper, but eventually it just fell out of me in 5 mins...

view details

6 place dining suite

YOUNGNICK, member | April 6th, 20118 comments

They say that you can make anything you design - you can't design outside your own making skills. Thats all very well but this really made me scratch my head a while trying to work out how on earth I...

view details

RED 'N' CURLY

YOUNGNICK, member | March 25th, 20112 comments

This little fellow started out as a doodle and ended up as a table. Halfway through doodling I knew I was onto something good and so had to draw the other half. Thing was, how do I make itnbsp...

view details

hall table

YOUNGNICK, member | March 18th, 20112 comments

"We'd like something a little more modern," which considering that it came from an 82 year old gentelman was brave indeed. I'd made a hall mirror for Norman and his wife a couple of years earlier to...

view details

Rohlfs Inspired Desk Chair 2

woodbridge, member | February 27th, 20114 comments

This chair is inspired by the sweeping slender back of a Charles Rohlfs chair. The back and sides are bent laminations. It is made of maple boards (left over from a kitchen cabinet...

view details

PHOTO ARC/LIST

pepro, member | January 29th, 2011

In my profession I work with Commercial & PR. I'm a "one man band": • Copywriter (in Swedish any how) • Photographer • Art Director • Web Designer • Graphic...

view details

Three Leg Chair

woodbridge, member | January 22nd, 20113 comments

This chair was a bit of an experiment and an opportunity to practice bent laminations and making a carved seat. It is made from re-used mahogany baseboard, door casing and door...

view details

Rohlfs Inspired Desk Chair 1

woodbridge, member | January 22nd, 20111 comment

This chair is based on a Charles Rohlfs desk chair design, much simplified. The chair is made from re-used 3" mahogany baseboard and 2 "door casing, which was planed down to 1/4 thickness and...

view details

showing 1 - 32 of 166 posts
1 2 3 Next > Last

An application error was encountered.

Severity: Warning

Message: file_get_contents(http://custommade.com/feeds/xml/?keyword=wood&count=4&imgsize=150) [function.file-get-contents]: failed to open stream: HTTP request failed! HTTP/1.1 404 NOT FOUND

Filename: libraries/Module.php

Line Number: 1954

Array

Welcome to Fine Woodworking's Readers Gallery,
an online photo community where woodworkers like you can share photos of all your woodworking projects. Log in or register now to create your public profile, share photos, and comment on other photos.

Check out our brand-new SHOP GALLERY and JIGS GALLERY. Get inspired and then post pictures of your own work.

CURRENT GALLERY CHALLENGES:
Show Us Your Drawers