|
|
|
|
Reader's Gallery
Post your project Subscribe to RSS feed
Closet Shelves and Brackets
These brackets and shelves were made from recycled pine. Our 1906 house had a simple Jelly Cabinet in the basement that was rotting at the base and falling apart. I salvaged what I could...
view details
Louis XV style Side Chair
This is the side chair that is part of the same set from my previous post. It is also made out of birch and has a cane back. All the parts are carved and shaped by hand. All the beading on these...
view details
Bubinga & Maple Credenza
6 commentsThis is from my wine cabinet series. This piece though made for the show of The Furniture Society Conference held at Victoria, BC., Canada, Frame is bubinga, door panels are maple...
view details
Shaker Style Bookcase
When I first sketched this book case, it had a classic Shaker form although it is not precisely like any Shaker item I have ever seen. The clean lines, nice proportions, and small...
view details
skinny legs and all
5 commentsI designed and built this small side table over the past winter, it's main body is Ash. A log that my wife and I literally stumbled over a few years back on the shore of Cape Breton Island in Nova Scotia, Canada. I had a freind with a bandsaw mill rip it down and left it to air dry for three years. The drawer fronts are made from Angelique, again another 'sea-faring' wood species...This was reclaimed from an old barge that sat in Marthas Vineyard for the better part of 100 years! This table was completely made by hand using only hand tools. The finish is Tried and True oil/varnish mix. Reclaimed wood, no power tools used and a food grade all natural oil for finish...what could be any greener than that? Cheers! www.tomfidgen.blogspot.com
view details
Federal Side Table
Federal style side table, inspired by parts of some of the best. Mahogany with mahogany crotch veneers and figured mahagony top. Flower carvings at the top of each leg. Turned and reeded legs...
view details
cherry shaker hall table
This shaker hall table is made of cherry. The legs are tapered. A bead of wenge runs along the bottom of the skirts. The drawer is cut directly from the skirt across it's full...
view details
Black Walnut and Figured Maple side table
2 commentsThis small, decorative side table was built for a client with minimal room who needed a table to go between two chairs but also to be put against a wall for added space. Built from Black Walnut and...
view details
Mahogany Spice Box with String and Berry Inlay
6 commentsI wanted to do a project to practice hand-cut dovetails. When I saw Steve Latta's spicebox (FWW #196) it looked like an ideal project with more than 100 dovetails. I enhanced the design with...
view details
Huntboard (based on Garrett Hack's)
4 commentsThis is my first real woodworking project in 2006 based on Garrett Hack's article in FWW #187. The wood is Cherry with Flamed Birch and Ebony. I did not have a jointer or planer at this time so all...
view details
Chess Table
2 commentsI made this chess table in 2007 with cocobolo, maple and cherry. The frame is cherry with 1/8" thick maple and cocobolo veneer. The pulls and beading are cocobolo. The table has two drawers and two...
view details
Alexandra's jewelry box
1 commentThis cabinet, made for my 8yr. old daughter Alexandra is designed to hang necklaces and hold rings and earings in the drawer. Built of airdryed walnut, quilted maple, mahogany, pau ferro and...
view details
Decorative Parquetry, Dinning Table
1 commentThis 54" diameter table top has Maple, Birch, & Ebony. I cut the parquetry with a scalpel, using the "Window Method"
view details
Dining Buffet and Hutch
This was taken off The Shaker Bookcase from New Yankee Workshop. I made two units, then made an extended unit for the center base and added a wine rack for the center. An 11 foot piece for the top...
view details
Humidors
2 commentsMade as Christmas presents for my four , cigar smoking, golf buddies, these Humidors are constructed from spalted maple, flame and curly maple with black walnut and mahogany edging and detailing. The...
view details
Maple Kitchen Island
This was a Rock Hard Maple Kitchen Island / Workstation I designed and built for one of our clients. The butcher block, legs and frame are hard rock maple. The beaded panels deck planking drawer...
view details
Wedding Gift Wall Clock in Walnut
This clock was designed and built as a gift for my sister-in-law's wedding. My wife has four younger sisters, and I myself have two younger sisters. I decided a while ago that I wanted tobuild...
view details
Simple Hall Table
This is a small hall table that I built for our home. We have a Victorian built in the 1890's. We had an old console radio that served as a hall table that "came with the house"nbsp...
view details
Domino Table
1 commentThis is a domino table that I made for my father in law. On his last visit he told me he wanted a domino table so I took him to the local flea market to pick one up but he wasn't particularly...
view details
Granddaughters Crib
4 commentsSleigh Crib is made out of walnut and rift walnut veneers. The rosette carvings were a purchased item. The finish is dye stains and laquer.
view details
Sleigh bed
Black walnut king size sleigh bed with hand carved beeding. Curved laminated head board with walnut crotch veneer. A traditional style with a few adaptations (kennedy sleigh footboard) for the...
view details
auto aristocracy #1
This is another piece I completed in my undergratuate years. I was trying to fuse classic furniture styles with classic automobile forms. It is constructed of solid poplar, and mahogony accents, then...
view details
auto aristocracy
This is a piece I completed in my undergratuate years. I was trying to fuse classic furniture styles with classic automobile forms. It is constructed of solid poplar (including a coppered back), and...
view details
walnut media cabinet
1 commentHandmade Modern Through the aids of modern power tool jigs, this cabinet was made using entirely hand tools. Walnut Media Cabinet. More at www.workingwood.ca
view details
Cherry Sideboard
1 commentCherry sideboard w/rosewood trim and handles. Side and door panels are crotch cherry. I've modified the classic arts & crafts features in this piece as I usually do. Handles are clearly Japanese...
view details
Elegant Tapered & Splayed Legs Table
2 commentsThe top and legs are made out of red oak, the aprons are made out of white oak while the cockbeads are walnut. The top is under beveled.
view details
Shaker Wall Shelf
I modeled this wall shelf after a peg rack I saw in the Shaker Workshop catalog. I omitted the pegs and scaled it to fit between two windows in my home. The edges of teh stretcher are beaded, and the...
view details
|
|
Welcome to Fine Woodworking's Readers Gallery,
an online photo community where woodworkers like you can share photos of all your woodworking projects. Log in or register now to create your public profile, share photos, and comment on other photos.
Check out our brand-new SHOP GALLERY and JIGS GALLERY. Get inspired and then post pictures of your own work.
CURRENT GALLERY CHALLENGES:
Show Us Your Drawers
Got Jigs? Tip Top Tables Scraptacular Holiday Gift 2009 Cure for the Common Cabinet
Classical Style
Wood Turning Projects
Creative Bookcases
Build Outside the Box
Tool Chests and Cabinets
Built-In Furniture
Exposed Joinery
Reclaimed Lumber Projects
Holiday Gifts 2008
HOW TO LOGIN:
Step One: Create Your Profile or Login
Step Two: Post Pictures of your Furniture or Shop or Jigs.
Step Three: View Your Page
Join Woodworkers Like You
283414 woodworkers have joined Fine Woodworking. Create your profile and join the Fine Woodworking community!
Create your profile now!
