Copyright (c) 2014 en-us Fine Woodworking - "White-oak" tag posts Fine Woodworking - "White-oak" tag posts Thu, 24 Apr 2014 14:07:35 -0500 Fine Woodworking - "White-oak" tag posts Fine Woodworking - "White-oak" tag posts <![CDATA[Better than your vintage vinyl collection?]]> Tue, 25 Mar 2014 15:55:33 -0500 Better than your vintage vinyl collection? Posted by Ben_Blackmar
A new "spin" on wood turning: What happens when you translate wood into music? ]]>
<![CDATA[Pinewood derby car made from cutting board]]> Sun, 16 Mar 2014 21:57:11 -0500 Pinewood derby car made from cutting board Posted by rans0med
My wife made a cutting board using some scraps I picked up at the local Hicksville Planing Mill near Hagerstown, MD.  After she cut the board to length, I used the leftover piece of scrap to create... ]]>
<![CDATA[Drawer pulls in tight spaces]]> Mon, 10 Mar 2014 11:48:12 -0500 Drawer pulls in tight spaces Posted by MPekovich
Recently I had to figure out a way to make low-clearance pulls for drawers installed behind a sliding door. ]]>
<![CDATA[Craftsman End-Table]]> Sat, 08 Mar 2014 16:37:53 -0500 Craftsman End-Table Posted by bluezw
Craftsman/A&C style end-table built for my son's nursery. The table is going next to the Stickley Rocker and the crib which I have yet to finish. This table is 99% Quartered white Oak, the other 1... ]]>
<![CDATA[My daughters sideboard and display cabinet]]> Fri, 07 Mar 2014 15:36:26 -0500 My daughters sideboard and display cabinet Posted by user-2244022
My daughter wanted a "chunky" oak sideboard and display cabinet for her dining room in oak so Dad was set to work. This is the result. ]]>
<![CDATA[Arts and Crafts Style Queen Beds]]> Tue, 25 Feb 2014 20:33:39 -0500 Arts and Crafts Style Queen Beds Posted by ctsjr
Last summer I started building two queen sized beds, incorporating Arts and Crafts elements.  I used quarter sawn white oak, using 6/4 thickness.  I resawed and sized the panels myself.  This was... ]]>
<![CDATA[Heart ]]> Thu, 20 Feb 2014 13:35:03 -0500 Heart Posted by user-3190790
First heart shaped oak box .  ]]>
<![CDATA[Darren Hunter Furniture Designs]]> Fri, 14 Feb 2014 05:15:24 -0500 Darren Hunter Furniture Designs Posted by Kenshinkan
These pieces are displayed currently at an exhibition in the Far North of New Zealand at the Earth House. see details on my website ]]>
<![CDATA[Cabinet]]> Thu, 13 Feb 2014 15:42:20 -0500 Cabinet Posted by DoronPdut
Cabinet for shoes and coats. Hand dovetailed.   ]]>
<![CDATA[A Beginner's Mitered Box]]> Wed, 15 Jan 2014 09:53:43 -0500 A Beginner's Mitered Box Posted by DRyan
A novice's attempt at design and execution. ]]>
<![CDATA[Curved Seat Bench]]> Mon, 13 Jan 2014 07:06:27 -0500 Curved Seat Bench Posted by MickMc
To bend the wood for the seat, I soaked 1/4" Oak strips....put them in a bending jig....clamped it.  Glued the 5 layers separately into one unit.  Grain filler and 4 coats of finish. ]]>
<![CDATA[Arts & Crafts - Waylon's Mission Cradle]]> Sun, 05 Jan 2014 22:12:35 -0500 Arts & Crafts - Waylon's Mission Cradle Posted by bluezw
This cradle is an original  design, though was inspired and adapted from a plan in Wood mag. I wanted to build a functional cradle, that also fit my home. I wanted it to follow Stickley's mission... ]]>
<![CDATA[Key Cabinet]]> Sun, 05 Jan 2014 10:45:31 -0500 Key Cabinet Posted by kilkenny
Walnut Key cabinet. Wormy Walnut panel and QSO Shelves. The wee dolphin is carved from beech. ]]>
<![CDATA[Toboggans for Christmas]]> Tue, 31 Dec 2013 12:51:38 -0500 Toboggans for Christmas Posted by wj53
We are blessed with a large family and many brilliant , active grandchildren. To encourage healthy outdoors play I decided to make a toboggan, which evolved into seven toboggans. 5 about 4ft long, 1... ]]>
<![CDATA[Second Hayrake Table]]> Wed, 25 Dec 2013 10:18:20 -0500 Second Hayrake Table Posted by lbaker112
I built this table a second time for our house.  Built out of quarter sawn white oak I had harvested off of land that we own.  Oak, I've discovered, is a bit of a challenge in some ways but well... ]]>
<![CDATA[Table saw/Router cabinet]]> Tue, 24 Dec 2013 16:20:28 -0500 Table saw/Router cabinet Posted by GrenadaBarefoot
A friend of mine is just getting into woodworking. He bought a bench top saw but I told him to forget about the stand, we will build it. This is the result. The cabinet is five feet long and 26"... ]]>
<![CDATA[Another Good End to Shop Scrap]]> Mon, 16 Dec 2013 21:31:42 -0500 Another Good End to Shop Scrap Posted by lbaker112
For the second year in a row, I've made Christmas presents using the scrap I had collected throughout the year.  I hate throwing usable wood in the trash bin or the burn pile.  To my surprise... ]]>
<![CDATA[Parts and Small Tools Cabinet]]> Fri, 06 Dec 2013 12:23:42 -0500 Parts and Small Tools Cabinet Posted by GrenadaBarefoot
I got tired of searching for screws and other bits in a collection of glass and plastic jars and containers. I found some small plastic bins in the dollar store and thought these would be great in a... ]]>
<![CDATA[New Router Table]]> Fri, 06 Dec 2013 12:09:33 -0500 New Router Table Posted by GrenadaBarefoot
I recently purchased a new Incra LS Positioner and it would not fit my old router table so I took the opportunity to build a new router table with plenty of storage, mobility, dust collection and... ]]>
<![CDATA[Console table with mirror]]> Fri, 29 Nov 2013 02:26:26 -0500 Console table with mirror Posted by Norwegian
Console table in oak with associated mirror. Finished with white soap. ]]>