Copyright (c) 2014 en-us Fine Woodworking - "Veneer" tag posts Fine Woodworking - "Veneer" tag posts Sun, 23 Nov 2014 21:46:24 -0500 Fine Woodworking - "Veneer" tag posts Fine Woodworking - "Veneer" tag posts <![CDATA[Three Surprises]]> Thu, 20 Nov 2014 14:33:38 -0500 Three Surprises Posted by tjgorma
I hadn't intended on creating an Art Deco-inspired piece when I came up with the design of the liquor cabinet "Three Surprises", but it ended up that way. It is intended to house one's most precious... ]]>
<![CDATA[Ellipsoid Table]]> Thu, 20 Nov 2014 14:19:36 -0500 Ellipsoid Table Posted by tjgorma
The Ellipsoid Table was created with the idea of taking a traditionally-designed piece and breaking it down into its basic geometry through a series of intersecting, regular geometric forms... ]]>
<![CDATA[Myrtle Corner Cabinet]]> Tue, 11 Nov 2014 17:02:17 -0500 Myrtle Corner Cabinet Posted by Olymoly
My Myrtle Corner Cabinet is made of solid Myrtle, except for the curved doors and drawers fronts. They are laminated bendable plywood fully veneered with Myrtle Burl. I built up the laminations and... ]]>
<![CDATA[SMALL HANGING WALL CABINET]]> Thu, 06 Nov 2014 13:06:46 -0500 SMALL HANGING WALL CABINET Posted by tom8021
Dovetailed birch cabinet with marquetry panel. Some of the woods I used are manzanita, walnut burl, rosewood, and anigre. ]]>
<![CDATA[Gem Storage Box ]]> Wed, 24 Sep 2014 17:49:16 -0500 Gem Storage Box Posted by DennisZongker
This was one of the most enjoyable boxes that I have made so far. The butterfly and Lilies incorporated into the marquetry I have been wanting to do for a long time now. I inlayed some Mother of... ]]>
<![CDATA[Federal dining table by Duncan Phyfe]]> Tue, 09 Sep 2014 16:46:55 -0500 Federal dining table by Duncan Phyfe Posted by Ben_Blackmar
Exact replica of historic 20-ft. dining table owned by Martin Van Buren ]]>
<![CDATA[Veneered Boxes with a Twist]]> Thu, 04 Sep 2014 12:54:14 -0500 Veneered Boxes with a Twist Posted by FineWoodworkingEditors
Learn how to build beautiful boxes sporting intricate geometric veneer patterns. ]]>
<![CDATA[Ribbon Box]]> Sun, 24 Aug 2014 19:05:05 -0500 Ribbon Box Posted by qcwood
Built for a wedding gift in France, made of walnut, tulipwood, pink ivory and crotch walnut inlays ]]>
<![CDATA[Jewelry Box]]> Sun, 24 Aug 2014 19:00:09 -0500 Jewelry Box Posted by qcwood
This Jewelry Box is made of marbled Crotch Walnut solids and bookmatched box elder inlays. The secondary woods are maple, ash, 1/8ply, Wenge. It features 3 layers: 2 alyers under the lid and the... ]]>
<![CDATA[Pair of Side Tables in Brass, Cherry, and Letterwood]]> Mon, 11 Aug 2014 23:57:13 -0500 Pair of Side Tables in Brass, Cherry, and Letterwood Posted by geredwilliams
Brass inlay. Curved aprons and drawer fronts. Half-blind dovetails. Antiqued Cherry, Letterwood, Eucalyptus, and Brass. Commission for a family in D.C Finished with shellac and a bit of polyurethane... ]]>
<![CDATA[Geo-Ribbon Jewelry Box]]> Fri, 25 Jul 2014 14:51:00 -0500 Geo-Ribbon Jewelry Box Posted by DennisZongker
To make this box I started off by making the Ribbon Banding which is made out of Holly, Wenge, Walnut, & Maple Hardwoods.   The background veneer is Karelain birch burl and the Marquetry is the... ]]>
<![CDATA[Bowfront Jewelry Cabinet]]> Tue, 22 Jul 2014 11:33:23 -0500 Bowfront Jewelry Cabinet Posted by Hab5
This Cherry, Birdseye Maple and Wenge cabinet features through dovetail case joinery and bow front doors and drawers. The inside drawer fronts have been recessed and the outside drawer pulls were... ]]>
<![CDATA[Treasure Box]]> Fri, 04 Jul 2014 16:53:53 -0500 Treasure Box Posted by julienhardydesign
Karelian Birch veneer, Maple and Amaranth (Purpleheart). Polished lacquer gum finish. Made with traditional techniques using no power tools. ]]>
<![CDATA[Chest of drawers.]]> Sat, 28 Jun 2014 14:06:01 -0500 Chest of drawers. Posted by FWalk
A seven drawer chest of my own design.  The design is based on the classic semainier chest of drawers and is a fusion featuring cabriol legs and veneered sides.  To soften the bulk of the 2 in. x... ]]>
<![CDATA[Veneer Floor Lamp]]> Thu, 26 Jun 2014 14:04:40 -0500 Veneer Floor Lamp Posted by woodworkhead
Hi Folks, Made this from Ash veneer and super bright LEDS for the light source. Hope you like... ]]>
<![CDATA[Chess Table, Queen Style Base]]> Sun, 22 Jun 2014 11:34:34 -0500 Chess Table, Queen Style Base Posted by DennisZongker
This is a table that I made 15 years ago for a designer here locally. The table was designed to have their last name initial "W" cut into the two sides of the table top in opposing woods. I cut all... ]]>
<![CDATA[Avicii]]> Tue, 20 May 2014 13:24:59 -0500 Avicii Posted by Thomabubinga
This is my latest veneer artwork, Swedish dj Avicii. All cut by hand with a surgery knife. The idea was taken of a photo. The veneers I used were cerejeira crotch, maple, cherry, pearwood, rosewood... ]]>
<![CDATA[Gamble Style Game Table]]> Thu, 15 May 2014 16:09:26 -0500 Gamble Style Game Table Posted by jwaggoner
This Jalen's third project. He is 16 years old.   This game table was designed by Darrel Peart using the Gamble House table for inspiration. I contacted Darrel and asked if he would allow me to... ]]>
<![CDATA[Boxes]]> Sun, 20 Apr 2014 08:03:47 -0500 Boxes Posted by GrenadaBarefoot
Since my pile of cut off lumber has slowly started to take over the shop I thought I would build a few boxes with it and practice some techniques that I have wanted to try. It is also a great way to... ]]>
<![CDATA[First Father & Son Bed Project]]> Sat, 29 Mar 2014 18:22:58 -0500 First Father & Son Bed Project Posted by DennisZongker
This King Louis XV Rococo style bed was made by both my son Eric and myself. This is our first father and son piece of furniture made together for a customer. Eric turned the four bedposts on the... ]]>