Copyright (c) 2013 CraftStylish.com en-us Fine Woodworking - "Tenons" tag posts http://www.finewoodworking.com/tag/tenons Fri, 24 May 2013 12:01:30 -0500 Fine Woodworking - "Tenons" tag posts http://www.finewoodworking.com/assets/images/cs_logo_sm.jpg http://www.finewoodworking.com/tag/tenons Thu, 23 May 2013 15:25:51 -0500 http://www.finewoodworking.com/item/57729/barn-wood-dining-table http://www.finewoodworking.com/item/57729/barn-wood-dining-table Posted by williamo21
This table is built out of 100% solid white oak reclaimed from an old mule barn on our farm. The barn is around 100 years old so it makes for some interesting wood, cool spalting in areas. The... ]]> http://www.finewoodworking.com/item/57729/barn-wood-dining-table Mon, 20 May 2013 14:47:34 -0500 http://www.finewoodworking.com/item/107561/bindemiddel-filing-cabinet http://www.finewoodworking.com/item/107561/bindemiddel-filing-cabinet Posted by julienhardydesign
Filing cabinet of curly Birch, Black Walnut and laminated Birch.Dovetailed case, wedged through-tenon and mortise, and open slot mortise base.French lacquer and Tung oil finish. Made with... ]]> http://www.finewoodworking.com/item/107561/bindemiddel-filing-cabinet Sun, 19 May 2013 22:29:43 -0500 http://www.finewoodworking.com/item/107547/teriske-box http://www.finewoodworking.com/item/107547/teriske-box Posted by julienhardydesign
Box of Philippino Toog with mobile compartment. Handcut dovetails and open slot mortise.Tung oil exterior finish, light lacquer inside. Inspired from a James Krenov piece. Made with... ]]> http://www.finewoodworking.com/item/107547/teriske-box Sun, 19 May 2013 22:23:07 -0500 http://www.finewoodworking.com/item/107541/the-wrighteous-sideboard http://www.finewoodworking.com/item/107541/the-wrighteous-sideboard Posted by julienhardydesign
3-doored sideboard of solid black Walnut.Drawbore pinned tenon and mortise assembly. Open slot mortise door frames.Handles of black Walnut and African Blackwood.Tung oil, Carnauba and Beeswax... ]]> http://www.finewoodworking.com/item/107541/the-wrighteous-sideboard Sat, 11 May 2013 23:51:58 -0500 http://www.finewoodworking.com/item/107419/double-entry-doors http://www.finewoodworking.com/item/107419/double-entry-doors Posted by ICU8Dust
Double Mahogany entry doors with veneer/foam core. Panel glued with polyurethane adhesive and floating tenons glued with Titebond III. First attempt at making curved moldings and fitting curved mitre... ]]> http://www.finewoodworking.com/item/107419/double-entry-doors Fri, 03 May 2013 12:22:38 -0500 http://www.finewoodworking.com/item/107347/walnut-coffee-table http://www.finewoodworking.com/item/107347/walnut-coffee-table Posted by Nathan_C
This table was designed and built as part of my second semester at the Sheridan College (Oakville, ON, Canada) furniture design program. We were tasked to create a table with a drawer under 6 sq ft... ]]> http://www.finewoodworking.com/item/107347/walnut-coffee-table Mon, 22 Apr 2013 20:39:34 -0500 http://www.finewoodworking.com/item/107259/japanese-garden-bench http://www.finewoodworking.com/item/107259/japanese-garden-bench Posted by sbndominic
Built for local Relay for Life Silent Auction. ]]> http://www.finewoodworking.com/item/107259/japanese-garden-bench Sun, 21 Apr 2013 03:55:37 -0500 http://www.finewoodworking.com/item/107223/3d-joints-for-saloon-table http://www.finewoodworking.com/item/107223/3d-joints-for-saloon-table Posted by aronde
I have not come across this type of 3-dimensional joint so far. It was inspired by the wooden puzzles. Stock is 1 x 1 inch wide. Very easy to make on the table saw, using a cross-cut sled. All the... ]]> http://www.finewoodworking.com/item/107223/3d-joints-for-saloon-table Wed, 17 Apr 2013 09:48:44 -0500 http://www.finewoodworking.com/item/36453/trestle-table-breadboard-ends http://www.finewoodworking.com/item/36453/trestle-table-breadboard-ends Posted by rlafferty
Traditional trestle table construction with breadboard top. The endcaps have 5 tenons inside - the center tenon is pinned/glued/fixed; the other 4 are pinned thru slotted holes and not glued to allow... ]]> http://www.finewoodworking.com/item/36453/trestle-table-breadboard-ends Mon, 15 Apr 2013 08:29:59 -0500 http://www.finewoodworking.com/item/107029/reed-bench http://www.finewoodworking.com/item/107029/reed-bench Posted by woodtoes
Built entirely from hard maple and walnut. Joinery is the key to  overall aesthetic as well as the strength of bench. The marraige of contemporary design and traditional woodworking techniques is... ]]> http://www.finewoodworking.com/item/107029/reed-bench Mon, 25 Mar 2013 10:04:58 -0500 http://www.finewoodworking.com/item/106446/white-oak-vessel http://www.finewoodworking.com/item/106446/white-oak-vessel Posted by woodtoes
Made from a chunk of bfall-off from a dining table, this oak vessel's surfaces have been finished off using chisels. I am not much of a carver but do enjoy it when I get a chance. ]]> http://www.finewoodworking.com/item/106446/white-oak-vessel Mon, 25 Mar 2013 06:19:50 -0500 http://www.finewoodworking.com/item/106748/oak-trestle-table http://www.finewoodworking.com/item/106748/oak-trestle-table Posted by CowboyKenny
Oak Trestle table 8' 6" long by 3'6' wide. Bread board ends. Bent lamination was used to make the arched trestle. Gives it a nice gothic look. ]]> http://www.finewoodworking.com/item/106748/oak-trestle-table Wed, 20 Mar 2013 11:16:29 -0500 http://www.finewoodworking.com/item/106650/pint-sized-arts-and-crafts-cabinet http://www.finewoodworking.com/item/106650/pint-sized-arts-and-crafts-cabinet Posted by MPekovich
Here's a great little project that packs in a big Arts and Crafts punch. It's a scaled-down version of an Arts and crafts display case that I had originally built for Fine Woodworking. It incorporates the same features as the original, but requires less lumber and effort to build. ]]> http://www.finewoodworking.com/item/106650/pint-sized-arts-and-crafts-cabinet Sat, 16 Mar 2013 13:21:32 -0500 http://www.finewoodworking.com/item/106602/furniture http://www.finewoodworking.com/item/106602/furniture Posted by Dustymid
Dutch Pie Table is an old idea for a piece of furniture to have multiple uses; a round, half round or quarter round table with the remainder sections as shelves. Use it as storage shelves , then at... ]]> http://www.finewoodworking.com/item/106602/furniture Fri, 15 Mar 2013 17:21:03 -0500 http://www.finewoodworking.com/item/106578/cherry-shaker-sofa-table http://www.finewoodworking.com/item/106578/cherry-shaker-sofa-table Posted by cop154
American Cherry sofa table in the Shaker style. Front edge has a slight radius (1" over length). Construction is mortise and haunched tenons. Finish is 2 coats BLO, 4 coats of garnet shellac (1 lb... ]]> http://www.finewoodworking.com/item/106578/cherry-shaker-sofa-table Wed, 13 Mar 2013 20:09:53 -0500 http://www.finewoodworking.com/item/106540/alpha-and-omega-maple-slab-coffee-table http://www.finewoodworking.com/item/106540/alpha-and-omega-maple-slab-coffee-table Posted by savage69
This beautiful Curly Maple slab was given to me, the person that previously had it didn't know what to do with it due to the cracks that formed from a too hot dry kiln, to me it was an opertunity for... ]]> http://www.finewoodworking.com/item/106540/alpha-and-omega-maple-slab-coffee-table Sun, 03 Mar 2013 11:21:27 -0500 http://www.finewoodworking.com/item/106358/pennsylvania-tall-case-clock http://www.finewoodworking.com/item/106358/pennsylvania-tall-case-clock Posted by GrenadaBarefoot
As many of you know the idea of building a period piece is sort of the true test of your skills. I have built many Mission and Art/Craft and contemporary pieces but building this tall case clock has... ]]> http://www.finewoodworking.com/item/106358/pennsylvania-tall-case-clock Fri, 01 Mar 2013 21:51:36 -0500 http://www.finewoodworking.com/item/106346/foot-stool http://www.finewoodworking.com/item/106346/foot-stool Posted by Jim in Hudson
I built these footstools from Christian Becksvoort's design in Fine Woodworking  ]]> http://www.finewoodworking.com/item/106346/foot-stool Thu, 28 Feb 2013 18:25:06 -0500 http://www.finewoodworking.com/item/33544/matsuri http://www.finewoodworking.com/item/33544/matsuri Posted by Artisanflamingo
This is just a side table made of ash and beech, then it got tained and vintage effect white painted. Japanese furniture and style is my main inspiration. Feedback are very welcome, thanks folks !   ]]> http://www.finewoodworking.com/item/33544/matsuri Wed, 27 Feb 2013 21:18:31 -0500 http://www.finewoodworking.com/item/106305/blue-chair http://www.finewoodworking.com/item/106305/blue-chair Posted by woodtoes
This chair started life as a mock up for a different design that features enameled wooden slats for the seat and back. I also had a bag of of factory second fishing stringers that a friend had given... ]]> http://www.finewoodworking.com/item/106305/blue-chair