Copyright (c) 2014 CraftStylish.com en-us Fine Woodworking - "Maple" tag posts Fine Woodworking - "Maple" tag posts http://www.finewoodworking.com/tag/maple Mon, 28 Jul 2014 23:32:58 -0500 Fine Woodworking - "Maple" tag posts Fine Woodworking - "Maple" tag posts http://www.finewoodworking.com/assets/images/cs_logo_sm.jpg http://www.finewoodworking.com/tag/maple <![CDATA[Portabench]]> Fri, 18 Jul 2014 09:15:12 -0500 http://www.finewoodworking.com/item/108286/portabench http://www.finewoodworking.com/item/108286/portabench Portabench Posted by james3one
This was a design I came up with to use my beech slab, temporarily, in my front workroom.  In stark contrast to my usual engineering methods the design became more complex as I went along.  The top... ]]>
http://www.finewoodworking.com/item/108286/portabench
<![CDATA[Sewing Center]]> Sun, 13 Jul 2014 18:57:15 -0500 http://www.finewoodworking.com/item/113448/sewing-center http://www.finewoodworking.com/item/113448/sewing-center Sewing Center Posted by Turbochief
Sewing Centers / cabinets available for retail purchase tend to be large fold-out and fold-open units using mostly man-made materials and mass production joinery. After consultation with my local... ]]>
http://www.finewoodworking.com/item/113448/sewing-center
<![CDATA[MY ROUTER LATHE]]> Wed, 09 Jul 2014 10:20:59 -0500 http://www.finewoodworking.com/item/113405/my-router-lathe http://www.finewoodworking.com/item/113405/my-router-lathe MY ROUTER LATHE Posted by Aziz_Subach
 ROUTER LATHE ]]>
http://www.finewoodworking.com/item/113405/my-router-lathe
<![CDATA[Treasure Box]]> Fri, 04 Jul 2014 16:53:53 -0500 http://www.finewoodworking.com/item/113351/treasure-box http://www.finewoodworking.com/item/113351/treasure-box Treasure Box Posted by julienhardydesign
Karelian Birch veneer, Maple and Amaranth (Purpleheart). Polished lacquer gum finish. Made with traditional techniques using no power tools. ]]>
http://www.finewoodworking.com/item/113351/treasure-box
<![CDATA[Birdseye Maple and Curly Cherry Box]]> Fri, 20 Jun 2014 10:17:34 -0500 http://www.finewoodworking.com/item/113234/birdseye-maple-and-curly-cherry-box http://www.finewoodworking.com/item/113234/birdseye-maple-and-curly-cherry-box Birdseye Maple and Curly Cherry Box Posted by Frank_Smith
Birdseye Maple and Curly Cherry Box ]]>
http://www.finewoodworking.com/item/113234/birdseye-maple-and-curly-cherry-box
<![CDATA[Cremation Urn]]> Sun, 08 Jun 2014 09:05:17 -0500 http://www.finewoodworking.com/item/113112/cremation-urn http://www.finewoodworking.com/item/113112/cremation-urn Cremation Urn Posted by CowboyKenny
Built this urn for my friend's father who passed recently. I used maple for the sides. They had some very nice figure. Hand cut dovetails. The lid is spalted maple surrounded with walnut and maple... ]]>
http://www.finewoodworking.com/item/113112/cremation-urn
<![CDATA[Rustic chair]]> Thu, 29 May 2014 22:28:39 -0500 http://www.finewoodworking.com/item/113009/rustic-chair http://www.finewoodworking.com/item/113009/rustic-chair Rustic chair Posted by neobassman
I was inspired by Paul Ruhlman's video to make this rustic chair, though mine has a couple unique twists.  This was a fun project and has a lot in common with traditional windsor chair making. the... ]]>
http://www.finewoodworking.com/item/113009/rustic-chair
<![CDATA[Maloof Inspired Rocker]]> Sun, 25 May 2014 09:39:13 -0500 http://www.finewoodworking.com/item/112911/maloof-inspired-rocker http://www.finewoodworking.com/item/112911/maloof-inspired-rocker Maloof Inspired Rocker Posted by schafferfurniture
This is my version of Sam Maloof's iconic rocking chair. it is made from walnut and highlighted with maple. The seat is coopered instead of just using a flat piece of stock and it is finished with... ]]>
http://www.finewoodworking.com/item/112911/maloof-inspired-rocker
<![CDATA[live edg walnut bench]]> Wed, 21 May 2014 09:12:10 -0500 http://www.finewoodworking.com/item/112890/live-edg-walnut-bench http://www.finewoodworking.com/item/112890/live-edg-walnut-bench live edg walnut bench Posted by andersonwoodworks
this is a spec pice I intend to sell it is a live edg bench made out of walnut and spalted maple bow tis the demnisions ar 18"w x3" long x 19"tall and finished in shellac. it was inspired by a pice... ]]>
http://www.finewoodworking.com/item/112890/live-edg-walnut-bench
<![CDATA[Jewelry Box]]> Tue, 13 May 2014 13:16:55 -0500 http://www.finewoodworking.com/item/112794/jewelry-box http://www.finewoodworking.com/item/112794/jewelry-box Jewelry Box Posted by krob
When I asked my wife which of many designs she liked the best, Craig's was her first choice, although I had to scale it down a bit. This is 21" high by 18" wide. I had some small pieces of both the... ]]>
http://www.finewoodworking.com/item/112794/jewelry-box
<![CDATA[He comes like a roaring Lion]]> Mon, 12 May 2014 13:44:22 -0500 http://www.finewoodworking.com/item/112799/he-comes-like-a-roaring-lion http://www.finewoodworking.com/item/112799/he-comes-like-a-roaring-lion He comes like a roaring Lion Posted by DovetailDesignworks
A table i made for my wife last christmas to hold her bible, it's made from African Mahogany, Quilted Maple, bird's eye Maple, Spanish Cedar and Buffard Frere banding inlay. I was lucky to get it... ]]>
http://www.finewoodworking.com/item/112799/he-comes-like-a-roaring-lion
<![CDATA[Solid Maple Table]]> Sat, 10 May 2014 09:03:32 -0500 http://www.finewoodworking.com/item/112747/solid-maple-table http://www.finewoodworking.com/item/112747/solid-maple-table Solid Maple Table Posted by woodworkhead
Hi Folks, I thought I'd share this table with the readers. I made this for my son who started secondary school and needed a desk for his room. I used solid 2" maple to match the floor in the room... ]]>
http://www.finewoodworking.com/item/112747/solid-maple-table
<![CDATA[Oneida Air Systems Awards Woodworking Students]]> Thu, 01 May 2014 13:02:47 -0500 http://www.finewoodworking.com/item/112435/oneida-air-systems-awards-woodworking-students http://www.finewoodworking.com/item/112435/oneida-air-systems-awards-woodworking-students Oneida Air Systems Awards Woodworking Students Posted by DillonRyan
Two students receive the OAS Future Craftsmen Scholarship. ]]>
http://www.finewoodworking.com/item/112435/oneida-air-systems-awards-woodworking-students
<![CDATA[New console table for a living room]]> Sat, 26 Apr 2014 07:59:31 -0500 http://www.finewoodworking.com/item/111723/new-console-table-for-a-living-room http://www.finewoodworking.com/item/111723/new-console-table-for-a-living-room New console table for a living room Posted by AtelierDelAubier
This is a maple console table. I adapted the plan from a Quebec (Canada) woodworking magazine. I modified certain designs and functionalities elements. L'Atelier de l'Aubier - Saint-Lazare, Quebec... ]]>
http://www.finewoodworking.com/item/111723/new-console-table-for-a-living-room
<![CDATA[A Bread Board made by a Blue Collar Bread Winner]]> Fri, 25 Apr 2014 09:34:16 -0500 http://www.finewoodworking.com/item/112589/a-bread-board-made-by-a-blue-collar-bread-winner http://www.finewoodworking.com/item/112589/a-bread-board-made-by-a-blue-collar-bread-winner A Bread Board made by a Blue Collar Bread Winner Posted by MarkAReed
Don't know about you ...... but, this is how us blue collar crusty carpenters like makin bread boards. . No mortised handmade miters, baltic bamboo butterflies, or a slidin sassafrass slip fitNo... ]]>
http://www.finewoodworking.com/item/112589/a-bread-board-made-by-a-blue-collar-bread-winner
<![CDATA[Mahogany Segmented Bowl]]> Wed, 23 Apr 2014 13:46:51 -0500 http://www.finewoodworking.com/item/112574/mahogany-segmented-bowl http://www.finewoodworking.com/item/112574/mahogany-segmented-bowl Mahogany Segmented Bowl Posted by user-2952351
This is my first attempt at a segmented bowl.  It's constructed of mahogany, with ebony, bloodwood and maple accents.  The stringing design in the bottom is bloodwood, ebony, and holly.  The 132"... ]]>
http://www.finewoodworking.com/item/112574/mahogany-segmented-bowl
<![CDATA[Smoke and Mirrors]]> Sun, 13 Apr 2014 23:56:40 -0500 http://www.finewoodworking.com/item/112358/smoke-and-mirrors http://www.finewoodworking.com/item/112358/smoke-and-mirrors Smoke and Mirrors Posted by TAW6
Friends wanted to outfit their contemporary bedroom with mirrored pieces instead of more traditional designs. Based on photos they provided, I prepared designs for a dresser and matching... ]]>
http://www.finewoodworking.com/item/112358/smoke-and-mirrors
<![CDATA[Contemporary Tool Cabinet]]> Mon, 07 Apr 2014 11:02:16 -0500 http://www.finewoodworking.com/item/112406/contemporary-tool-cabinet http://www.finewoodworking.com/item/112406/contemporary-tool-cabinet Contemporary Tool Cabinet Posted by schafferfurniture
This tool cabinet was inspired by Mark Laub's work. It is made from birdseye maple and mahogany. All the dovetails were hand cut and so were the tennons. Finished with Shellac 44"H x 55" W x 14" D. ]]>
http://www.finewoodworking.com/item/112406/contemporary-tool-cabinet
<![CDATA[Another Maloof inspired Rocker]]> Mon, 07 Apr 2014 07:20:13 -0500 http://www.finewoodworking.com/item/112400/another-maloof-inspired-rocker http://www.finewoodworking.com/item/112400/another-maloof-inspired-rocker Another Maloof inspired Rocker Posted by mogador
I live in Belgium - email : zrichard3@gmail.com ]]>
http://www.finewoodworking.com/item/112400/another-maloof-inspired-rocker
<![CDATA[Jefferson Writing Desk]]> Sat, 05 Apr 2014 09:30:42 -0500 http://www.finewoodworking.com/item/35323/jefferson-writing-desk http://www.finewoodworking.com/item/35323/jefferson-writing-desk Jefferson Writing Desk Posted by barrycrowe
This was my first Jefferson Writing Desk and major dovetail project. I think I did okay. ]]>
http://www.finewoodworking.com/item/35323/jefferson-writing-desk