Copyright (c) 2014 en-us Fine Woodworking - "Frame-and-panel" tag posts Fine Woodworking - "Frame-and-panel" tag posts Thu, 24 Apr 2014 06:43:19 -0500 Fine Woodworking - "Frame-and-panel" tag posts Fine Woodworking - "Frame-and-panel" tag posts <![CDATA[Cherry Night Table]]> Thu, 24 Apr 2014 03:53:33 -0500 Cherry Night Table Posted by R_Cameron
Hi, Here is my first attempt at using hardwood in a furniture project. It is made of cherry, with baltic birch for the drawers. I decided to use soft closing drawer slides because of personal... ]]>
<![CDATA[Cherry Chest on Chest]]> Mon, 14 Apr 2014 16:48:14 -0500 Cherry Chest on Chest Posted by dogface
This is a simplfied Thomas Elf chest on chest. This was built in 2005. Cherry and figured Cherry for the drawer fronts. Poplar for secondary wood Finish is shellace and wax ]]>
<![CDATA[Jefferson Writing Desk]]> Sat, 05 Apr 2014 09:30:42 -0500 Jefferson Writing Desk Posted by barrycrowe
This was my first Jefferson Writing Desk and major dovetail project. I think I did okay. ]]>
<![CDATA[Cedar bookcase]]> Thu, 03 Apr 2014 14:16:15 -0500 Cedar bookcase Posted by user-3306570
<![CDATA[Mahogany/Makore Amoire]]> Fri, 28 Mar 2014 11:40:19 -0500 Mahogany/Makore Amoire Posted by TAW6
One thing about old houses is a lack of closets so a friend asked for a large amoire.  The African Mahogany case is accented with Makore veneered door and side panels. The upper unit also holds... ]]>
<![CDATA[Shop tool cabinet]]> Mon, 10 Mar 2014 16:42:26 -0500 Shop tool cabinet Posted by Shedshopmike
small cabinet for space above my bench ]]>
<![CDATA[Workshop Upgrade]]> Sun, 09 Mar 2014 23:43:21 -0500 Workshop Upgrade Posted by Kelly_MN
I decided to make better use of the 10-foot celings in my shop and eliminate several rolling carts taking up valuable floor space. I added cabinets above my work bench, trimmed out the windows to... ]]>
<![CDATA[Simple Frame And Panel Headboard]]> Fri, 07 Mar 2014 16:22:52 -0500 Simple Frame And Panel Headboard Posted by Samlsn
This was built mostly with framing lumber,  fastened with 15 gauge finish nails and 3" washer-head screws. ]]>
<![CDATA[My daughters sideboard and display cabinet]]> Fri, 07 Mar 2014 15:36:26 -0500 My daughters sideboard and display cabinet Posted by user-2244022
My daughter wanted a "chunky" oak sideboard and display cabinet for her dining room in oak so Dad was set to work. This is the result. ]]>
<![CDATA[Walnut & Pine Tool Chest]]> Sun, 02 Mar 2014 10:35:07 -0500 Walnut & Pine Tool Chest Posted by whitedogstr8leg
A small tool chest, for a small shop.   Had some Black walnut boards laying around, and a few scraps of Pine.  One sliding tray, and a lift-out tote.   Floor of chest is just two pine... ]]>
<![CDATA[Arts and Crafts Style Queen Beds]]> Tue, 25 Feb 2014 20:33:39 -0500 Arts and Crafts Style Queen Beds Posted by ctsjr
Last summer I started building two queen sized beds, incorporating Arts and Crafts elements.  I used quarter sawn white oak, using 6/4 thickness.  I resawed and sized the panels myself.  This was... ]]>
<![CDATA[Entrance furniture]]> Sat, 22 Feb 2014 16:45:02 -0500 Entrance furniture Posted by AtelierDelAubier
A little cabinet to store shoes in a small entrance way. ]]>
<![CDATA[Maple and Walnut Blanket Box]]> Tue, 18 Feb 2014 18:45:27 -0500 Maple and Walnut Blanket Box Posted by CowboyKenny
Blanket Box for my daughter. Walnut frame and maple panels. Finished with shellac. Aromatic cedar inside. ]]>
<![CDATA[ jewelry box]]> Thu, 13 Feb 2014 15:08:01 -0500  jewelry box Posted by DoronPdut
A gift for the woman ]]>
<![CDATA[Oak TV Stand]]> Sat, 08 Feb 2014 18:43:23 -0500 Oak TV Stand Posted by jj9ball
I made the TV cabinet from Red Oak. I cut the raised panels for the doors on the tablesaw. I also turned the bun feet on the lathe. The finish is shellac and satin poly. There is also a 6 inch deep... ]]>
<![CDATA[Key Cabinet]]> Sun, 05 Jan 2014 10:45:31 -0500 Key Cabinet Posted by kilkenny
Walnut Key cabinet. Wormy Walnut panel and QSO Shelves. The wee dolphin is carved from beech. ]]>
<![CDATA[Red Oak Bar]]> Sat, 04 Jan 2014 11:35:22 -0500 Red Oak Bar Posted by CowboyKenny
Custom made trimwork, armrail custom coved on table saw, all flat trim cut to best show ray flecks for visual interest against the broad grain of the panels.Bar is 43 inches high, 90 inches long. Two... ]]>
<![CDATA[Liqour Cabinet]]> Sat, 04 Jan 2014 11:19:02 -0500 Liqour Cabinet Posted by CowboyKenny
Red Oak cabinet with 3 sliding doors. 34 inches high, 8 inches deep and 82 inches long. Frame and panel doors. Panels resawn to highlight ray flecks. Finished with Oil Varnish mix. ]]>
<![CDATA[Little Maple Cabinet]]> Fri, 03 Jan 2014 14:13:00 -0500 Little Maple Cabinet Posted by Thirstypeanut
This is a small cabinet made of hard maple. The two doors on the left are sliding doors, and the one on the right is hinged. The slats in the door frames are concave, planed with a round bottom... ]]>
<![CDATA[Torii Nightstand]]> Mon, 30 Dec 2013 16:00:09 -0500 Torii Nightstand Posted by Ralph Kolva
This piece started out as a small cabinet for my wife's office while also helping me build my portfolio.  I wanted a small case that would lend itselft to small production runs while still being... ]]>