Copyright (c) 2014 CraftStylish.com en-us Fine Woodworking - "Accessory" tag posts Fine Woodworking - "Accessory" tag posts http://www.finewoodworking.com/tag/accessory Wed, 16 Apr 2014 19:51:48 -0500 Fine Woodworking - "Accessory" tag posts Fine Woodworking - "Accessory" tag posts http://www.finewoodworking.com/assets/images/cs_logo_sm.jpg http://www.finewoodworking.com/tag/accessory <![CDATA[Hatching egg coat hook (+free plans)]]> Fri, 04 Apr 2014 11:43:14 -0500 http://www.finewoodworking.com/item/112342/hatching-egg-coat-hook-free-plans http://www.finewoodworking.com/item/112342/hatching-egg-coat-hook-free-plans Hatching egg coat hook (+free plans) Posted by mikeasaurus
An egg shaped coat hook 'cracks' open to reveal a baby bird when a coat is hung, when the coat is removed the egg closes up again. This fun coat hook was made for my friend's little girl and is made... ]]>
http://www.finewoodworking.com/item/112342/hatching-egg-coat-hook-free-plans
<![CDATA[Turning for Wounded Warriors]]> Mon, 17 Mar 2014 10:48:43 -0500 http://www.finewoodworking.com/item/111411/turning-for-wounded-warriors http://www.finewoodworking.com/item/111411/turning-for-wounded-warriors Turning for Wounded Warriors Posted by DRyan
Woodworkers help heal local veterans through the art of turning. ]]>
http://www.finewoodworking.com/item/111411/turning-for-wounded-warriors
<![CDATA[Pinewood derby car made from cutting board]]> Sun, 16 Mar 2014 21:57:11 -0500 http://www.finewoodworking.com/item/112082/pinewood-derby-car-made-from-cutting-board http://www.finewoodworking.com/item/112082/pinewood-derby-car-made-from-cutting-board Pinewood derby car made from cutting board Posted by rans0med
My wife made a cutting board using some scraps I picked up at the local Hicksville Planing Mill near Hagerstown, MD.  After she cut the board to length, I used the leftover piece of scrap to create... ]]>
http://www.finewoodworking.com/item/112082/pinewood-derby-car-made-from-cutting-board
<![CDATA[The Hammer Family]]> Sun, 02 Mar 2014 14:26:12 -0500 http://www.finewoodworking.com/item/111826/the-hammer-family http://www.finewoodworking.com/item/111826/the-hammer-family The Hammer Family Posted by Czappa
Just had to make another one of these. Only took 50 hours to do. Lost count of the number of nails and tacks. Mahogony frame and vintage hammers. 23"x23"x3 ]]>
http://www.finewoodworking.com/item/111826/the-hammer-family
<![CDATA[Mebeljeparashop.com Jepara Furniture Shop]]> Tue, 11 Feb 2014 10:31:21 -0500 http://www.finewoodworking.com/item/111504/mebeljeparashopcom-jepara-furniture-shop http://www.finewoodworking.com/item/111504/mebeljeparashopcom-jepara-furniture-shop Mebeljeparashop.com Jepara Furniture Shop Posted by mebeljeparashop
Here some my furniture production process. Visit us on http://www.mebeljeparashop.com/ ]]>
http://www.finewoodworking.com/item/111504/mebeljeparashopcom-jepara-furniture-shop
<![CDATA[additional views of maple box]]> Sat, 25 Jan 2014 18:06:03 -0500 http://www.finewoodworking.com/item/109491/additional-views-of-maple-box http://www.finewoodworking.com/item/109491/additional-views-of-maple-box additional views of maple box Posted by dogface
Additional views of maple / walnut box ]]>
http://www.finewoodworking.com/item/109491/additional-views-of-maple-box
<![CDATA[Tabular Display]]> Sat, 18 Jan 2014 23:48:20 -0500 http://www.finewoodworking.com/item/111048/tabular-display http://www.finewoodworking.com/item/111048/tabular-display Tabular Display Posted by TAW6
A collection of small occasional tables. ]]>
http://www.finewoodworking.com/item/111048/tabular-display
<![CDATA[Deinonychus Skull]]> Tue, 14 Jan 2014 13:48:44 -0500 http://www.finewoodworking.com/item/111079/deinonychus-skull http://www.finewoodworking.com/item/111079/deinonychus-skull Deinonychus Skull Posted by Bryan2014
Making a dinosaur skull is a project few seldom attempt. The task for this project was to carve a wooden replica of a Deinonychus that was accurate in its features to an actual fossil. The skull... ]]>
http://www.finewoodworking.com/item/111079/deinonychus-skull
<![CDATA[Ulu knife cutting board]]> Sat, 11 Jan 2014 16:09:00 -0500 http://www.finewoodworking.com/item/111038/ulu-knife-cutting-board http://www.finewoodworking.com/item/111038/ulu-knife-cutting-board Ulu knife cutting board Posted by Peter_Menlo
Ulu knife cutting board by Maya, just turned 11 years old.  Milling a spherical concavity in rock-hard rift sawn white oak would be a challenge for anyone. ]]>
http://www.finewoodworking.com/item/111038/ulu-knife-cutting-board
<![CDATA[Button Wall Art]]> Mon, 06 Jan 2014 08:56:59 -0500 http://www.finewoodworking.com/item/110955/button-wall-art http://www.finewoodworking.com/item/110955/button-wall-art Button Wall Art Posted by margaretsw
Instruments: Drill Drill bits in various sizes Screw Materials: Round pieces of wood; Primer and paint.   Sandpaper if the wooden surface needs more extensive preparation than just a coat of... ]]>
http://www.finewoodworking.com/item/110955/button-wall-art
<![CDATA[Tiger Maple / walnut keepsake box]]> Sat, 28 Dec 2013 08:44:53 -0500 http://www.finewoodworking.com/item/110786/tiger-maple-walnut-keepsake-box http://www.finewoodworking.com/item/110786/tiger-maple-walnut-keepsake-box Tiger Maple / walnut keepsake box Posted by dogface
Tiger Maple and walnut keepsake box Finish is oil with top coated with several coats of wipe on varnish, sanded lightly between coats. After the finish had cured used Maguire's swirl remover to... ]]>
http://www.finewoodworking.com/item/110786/tiger-maple-walnut-keepsake-box
<![CDATA[Glider Horse]]> Tue, 24 Dec 2013 16:08:32 -0500 http://www.finewoodworking.com/item/110466/glider-horse http://www.finewoodworking.com/item/110466/glider-horse Glider Horse Posted by GrenadaBarefoot
About two months ago a friend called to ask if I could build a glider horse for his new baby daughter for Christmas. I had never done anything like this before but I said yes anyway. Then I got down... ]]>
http://www.finewoodworking.com/item/110466/glider-horse
<![CDATA[Natural Picture Frame]]> Sun, 22 Dec 2013 20:30:32 -0500 http://www.finewoodworking.com/item/110713/natural-picture-frame http://www.finewoodworking.com/item/110713/natural-picture-frame Natural Picture Frame Posted by Antondeg
My mother did this painting of my wife and I and it needed a frame. So I made a natual frame from a piece of red oak firewood.  ]]>
http://www.finewoodworking.com/item/110713/natural-picture-frame
<![CDATA[Makeup Brush Holder]]> Mon, 28 Oct 2013 14:44:06 -0500 http://www.finewoodworking.com/item/109929/makeup-brush-holder http://www.finewoodworking.com/item/109929/makeup-brush-holder Makeup Brush Holder Posted by Spenyg
My girlfirend wanted a way to organize her makeup brushes as she seems to have a lot of them. I gladly accepted this challenge as I did not see it being difficult project and I would like a more... ]]>
http://www.finewoodworking.com/item/109929/makeup-brush-holder
<![CDATA[Build a Twin Screw Vise]]> Sat, 12 Oct 2013 09:20:52 -0500 http://www.finewoodworking.com/item/109648/build-a-twin-screw-vise http://www.finewoodworking.com/item/109648/build-a-twin-screw-vise Build a Twin Screw Vise Posted by GarageWoodworks
I made a Twin Screw Vise using my own threaded dowels. I am very pleased with how well it works. Can be used to hand cut dovetails and tenons. and more. Watch the build video here Get the Plans Here ]]>
http://www.finewoodworking.com/item/109648/build-a-twin-screw-vise
<![CDATA[Rickeeeee!]]> Sat, 21 Sep 2013 11:20:36 -0500 http://www.finewoodworking.com/item/109334/rickeeeee http://www.finewoodworking.com/item/109334/rickeeeee Rickeeeee! Posted by Czappa
Lucy has been the longest running TV show so I thought why not have her tighed to a chair having to watch her own show?Oak hardwood floor Pine two by fours and hand made oak TV set. The Hollywood... ]]>
http://www.finewoodworking.com/item/109334/rickeeeee
<![CDATA[Digital Angle Gauge: What do you use yours for? ]]> Fri, 06 Sep 2013 11:34:17 -0500 http://www.finewoodworking.com/item/109092/digital-angle-gauge-what-do-you-use-yours-for http://www.finewoodworking.com/item/109092/digital-angle-gauge-what-do-you-use-yours-for Digital Angle Gauge: What do you use yours for? Posted by Ben_Blackmar
Do you have a digital inclinometer in your shop? ]]>
http://www.finewoodworking.com/item/109092/digital-angle-gauge-what-do-you-use-yours-for
<![CDATA[Roosevelt Cigar Table]]> Thu, 05 Sep 2013 23:58:18 -0500 http://www.finewoodworking.com/item/109112/roosevelt-cigar-table http://www.finewoodworking.com/item/109112/roosevelt-cigar-table Roosevelt Cigar Table Posted by SchefflerWorkedWood
ROOSEVELT CIGAR TABLE   Materials: Maple Burl, Zebrawood, Steel Dimensions:  13"L  x  11"W  x 13"H Finish:  Hand-rubbed oil (fully cured), shellac, and spray lacquer for added durability and... ]]>
http://www.finewoodworking.com/item/109112/roosevelt-cigar-table
<![CDATA[Ottoman tray]]> Sat, 24 Aug 2013 13:46:16 -0500 http://www.finewoodworking.com/item/108829/ottoman-tray http://www.finewoodworking.com/item/108829/ottoman-tray Ottoman tray Posted by kuma13
This is an ottoman tray made from mostly African mahogany in my signature tray style. It's a rather large serving tray/ottoman tray at 20" x 30" and it incorporates an inlayed compass rose design... ]]>
http://www.finewoodworking.com/item/108829/ottoman-tray
<![CDATA[Custom Oak Nature Table Lamp]]> Sat, 27 Jul 2013 20:14:58 -0500 http://www.finewoodworking.com/item/108490/custom-oak-nature-table-lamp http://www.finewoodworking.com/item/108490/custom-oak-nature-table-lamp Custom Oak Nature Table Lamp Posted by RCCWood
Piece of red oak, insects feasted on the interior wood, but left behind an awesome natural cavity of decay.  Wood is washed, then treated.  Added a switch that controls lamp light, & nite light... ]]>
http://www.finewoodworking.com/item/108490/custom-oak-nature-table-lamp