Copyright (c) 2010 CraftStylish.com en-us Fine Woodworking - "Tool Chest Photo Gallery" contest entries http://www.finewoodworking.com/contest/tool-chests-cabinets Tue, 09 Feb 2010 04:08:08 -0500 Fine Woodworking - "Tool Chest Photo Gallery" contest entries http://www.finewoodworking.com/assets/images/cs_logo_sm.jpg http://www.finewoodworking.com/contest/tool-chests-cabinets Tue, 30 Jun 2009 15:30:23 -0400 http://www.finewoodworking.com/item/16399/brookwood-box http://www.finewoodworking.com/item/16399/brookwood-box Posted by brookdalewoods
WHITE OAK MACHINIST BOX Zebra wood with custom aluminum handles. Box lid latches internally and secures the drawers by a quarter turn on main knob.  Side handles are built into the frame to... ]]> http://www.finewoodworking.com/item/16399/brookwood-box Tue, 30 Jun 2009 00:10:26 -0400 http://www.finewoodworking.com/item/16384/scotts-wall-tool-cabinet http://www.finewoodworking.com/item/16384/scotts-wall-tool-cabinet Posted by sadie170
I made this hanging tool chest out Oak and Maple using Norm Abrams New Yankee Workshop plans.  The project was fun and went together quickly.  ]]> http://www.finewoodworking.com/item/16384/scotts-wall-tool-cabinet Mon, 29 Jun 2009 21:28:15 -0400 http://www.finewoodworking.com/item/16362/larry-gladstones-tool-chest http://www.finewoodworking.com/item/16362/larry-gladstones-tool-chest Posted by LarryGladstone
Larry Gladstone's Tool Chest ]]> http://www.finewoodworking.com/item/16362/larry-gladstones-tool-chest Sun, 28 Jun 2009 23:00:45 -0400 http://www.finewoodworking.com/item/16322/craftsmans-tool-chest http://www.finewoodworking.com/item/16322/craftsmans-tool-chest Posted by rhlong
I found the plans for this heirloom tool chest in Woodsmith magazine, Vol. 28/No. 168. It is a useable tool chest to store my fine chisels and marking tools. It has 11 soft, leatherlined... ]]> http://www.finewoodworking.com/item/16322/craftsmans-tool-chest Sun, 28 Jun 2009 17:24:02 -0400 http://www.finewoodworking.com/item/16319/woodshop-cabinets http://www.finewoodworking.com/item/16319/woodshop-cabinets Posted by Octavius
Rather than making raised panels doors for my woodshop cabinets, I constructed doors to show off my wooden planes. ]]> http://www.finewoodworking.com/item/16319/woodshop-cabinets Sun, 28 Jun 2009 13:12:53 -0400 http://www.finewoodworking.com/item/16302/chest-with-a-workspace http://www.finewoodworking.com/item/16302/chest-with-a-workspace Posted by bafaans
84L 36W 39H 13 Wood species used from local logger, Self Air dried, Salvaged stairs and pallets. 8 Months to complete. Demountable for easier transport.   ]]> http://www.finewoodworking.com/item/16302/chest-with-a-workspace Sun, 28 Jun 2009 12:22:10 -0400 http://www.finewoodworking.com/item/16295/down-and-dirty-in-plywood http://www.finewoodworking.com/item/16295/down-and-dirty-in-plywood Posted by Jeff_Richards
Constructed of plywood and scraps, storage in lid, trays in middle with pull-out (more storage below).  Full extension drawer on bottom.  Top once doubled as bench for planing etc. ]]> http://www.finewoodworking.com/item/16295/down-and-dirty-in-plywood Wed, 24 Jun 2009 12:19:56 -0400 http://www.finewoodworking.com/item/16001/granite-plate-on-a-mondriaan-design-frame-coffee-table http://www.finewoodworking.com/item/16001/granite-plate-on-a-mondriaan-design-frame-coffee-table Posted by evandene
The Granite stone has his original rough cut surface and circumference. After the treathment with Tung Oil it ended up as a beautyful Coffee Table. Dimensions 4.5' x 4.5' ]]> http://www.finewoodworking.com/item/16001/granite-plate-on-a-mondriaan-design-frame-coffee-table Tue, 23 Jun 2009 21:14:27 -0400 http://www.finewoodworking.com/item/15943/new-yankee-toolchest http://www.finewoodworking.com/item/15943/new-yankee-toolchest Posted by HersheyWoodworker
I haven't seen this cabinet yet on FWW - and somebody had to put in a "shout out" to Norm!  This cabinet was inspired by the New Yankee Workshop episode that also featured the Studley... ]]> http://www.finewoodworking.com/item/15943/new-yankee-toolchest Sat, 20 Jun 2009 23:10:50 -0400 http://www.finewoodworking.com/item/15861/craftworkers-tool-chest http://www.finewoodworking.com/item/15861/craftworkers-tool-chest Posted by Landieman
This second attempt at chest making is a chest for my wife to store various craft items in. Made from New Zealand Silver Beech with drop down front and a Lacquer fiinish. The stainless... ]]> http://www.finewoodworking.com/item/15861/craftworkers-tool-chest Sat, 20 Jun 2009 22:47:40 -0400 http://www.finewoodworking.com/item/15857/machinists-chest http://www.finewoodworking.com/item/15857/machinists-chest Posted by Landieman
My first attempt at any sort of serious wood working project, this traditional drop front machinist's chest is made from recycled New Zealand Rimu, the front and back panel tongue and grooved board... ]]> http://www.finewoodworking.com/item/15857/machinists-chest Sat, 20 Jun 2009 01:19:54 -0400 http://www.finewoodworking.com/item/15819/dads-apprenticeship-toolchest http://www.finewoodworking.com/item/15819/dads-apprenticeship-toolchest Posted by DaleSchack
My Dad apprenticed as a cabinetmaker in Denmark, and their second year project was a toolbox, which was then used for the rest of their apprenticeship and onwards in their careers as cabinetmakers... ]]> http://www.finewoodworking.com/item/15819/dads-apprenticeship-toolchest Fri, 19 Jun 2009 08:31:17 -0400 http://www.finewoodworking.com/item/15768/toolbox-for-the-workshop http://www.finewoodworking.com/item/15768/toolbox-for-the-workshop Posted by snapperhead
I needed a tool box in my workshop to hold all my carving tools and hand tools.  I had tools in rolls, different cabinets and boxes.  When I needed something it took time to find their... ]]> http://www.finewoodworking.com/item/15768/toolbox-for-the-workshop Thu, 18 Jun 2009 18:02:47 -0400 http://www.finewoodworking.com/item/15683/whale-tail-ash-and-walnut-tool-chest-with-spalted-maple-side-panels http://www.finewoodworking.com/item/15683/whale-tail-ash-and-walnut-tool-chest-with-spalted-maple-side-panels Posted by AlecSebastian
This tool chest is made almost entirely from my stash of Treecycled lumber. The drawer fronts are resawn from 8/4 walnut stock to make two 3/4" fronts that match end to end. The topmost pair was then... ]]> http://www.finewoodworking.com/item/15683/whale-tail-ash-and-walnut-tool-chest-with-spalted-maple-side-panels Thu, 18 Jun 2009 10:55:32 -0400 http://www.finewoodworking.com/item/15689/bucket-storage http://www.finewoodworking.com/item/15689/bucket-storage Posted by oldpoopie
This is my air hose storage. I need to win the tablesaw to make one of those fancy toolboxes that everyone else has photos of!  This allows you to hook the hose up thru the whip that sticks thru... ]]> http://www.finewoodworking.com/item/15689/bucket-storage Wed, 17 Jun 2009 16:46:58 -0400 http://www.finewoodworking.com/item/15655/tool-storagerouter-station http://www.finewoodworking.com/item/15655/tool-storagerouter-station Posted by Gasssman
A NEED FOR MORE STORAGE AND A STAND ALONE ROUTER STATION. I BUILT THIS IN MY SPARE TIME WITH NO REAL PLANS. ADDING FEATURES AS I WENT. I'M STILL ADDING AS I SEE A NEED FOR MORE. MOST OF THE MATERIALS... ]]> http://www.finewoodworking.com/item/15655/tool-storagerouter-station Tue, 16 Jun 2009 18:52:00 -0400 http://www.finewoodworking.com/item/14624/handplane-storage-case http://www.finewoodworking.com/item/14624/handplane-storage-case Posted by garretto
As part of a Hand Joinery class at Palomar College, we were required to build a box incorporating dovetails, frame and panel and a lid. My Lie Nielsen planes didn't have their own home so a case was... ]]> http://www.finewoodworking.com/item/14624/handplane-storage-case Tue, 16 Jun 2009 14:24:46 -0400 http://www.finewoodworking.com/item/15568/my-neander-haven http://www.finewoodworking.com/item/15568/my-neander-haven Posted by garyzim
A little over 7 1/2 months in the making and is my most labor intensive project as a weekend woodworking warrior. This is my labor of love as my Neader Haven has 48 drawers that are all hand cut... ]]> http://www.finewoodworking.com/item/15568/my-neander-haven Mon, 15 Jun 2009 22:34:31 -0400 http://www.finewoodworking.com/item/15547/tombstone-paneled-tool-cabinet http://www.finewoodworking.com/item/15547/tombstone-paneled-tool-cabinet Posted by mkarafa
Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 ... ]]> http://www.finewoodworking.com/item/15547/tombstone-paneled-tool-cabinet Mon, 15 Jun 2009 21:37:56 -0400 http://www.finewoodworking.com/item/15541/stained-oak-poplar-standing-tool-chest http://www.finewoodworking.com/item/15541/stained-oak-poplar-standing-tool-chest Posted by Josephindus
Dimensions: 36'' Tall x 24'' Wide x 9'' Depth. All solid poplar construction. Cab door faces are white oak. All stained dark and top coated with poly. Has 11 drawers and two doors. ]]> http://www.finewoodworking.com/item/15541/stained-oak-poplar-standing-tool-chest