Copyright (c) 2010 CraftStylish.com en-us Fine Woodworking - "Contest: Build Outside The Box" contest entries http://www.finewoodworking.com/contest/build-outside-the-box Tue, 09 Feb 2010 14:24:58 -0500 Fine Woodworking - "Contest: Build Outside The Box" contest entries http://www.finewoodworking.com/assets/images/cs_logo_sm.jpg http://www.finewoodworking.com/contest/build-outside-the-box Thu, 26 Mar 2009 12:44:13 -0400 http://www.finewoodworking.com/item/11020/watch-gift-box http://www.finewoodworking.com/item/11020/watch-gift-box Posted by TMitchell
Watch gift box made of Walnut and Cedar with a Brass Pin.  Figured it would be fitting for this contest as it was made entirely on the tablesaw (plus a drill for the hole) using precise cuts to... ]]> http://www.finewoodworking.com/item/11020/watch-gift-box Wed, 25 Mar 2009 23:37:42 -0400 http://www.finewoodworking.com/item/10948/zen-garden-box http://www.finewoodworking.com/item/10948/zen-garden-box Posted by garethhgriffith
Another box I created in an attempt to ask the question, what can a box contain?  This box does not contain any wood, instead I used copper and glass as my medium. ]]> http://www.finewoodworking.com/item/10948/zen-garden-box Wed, 25 Mar 2009 23:31:07 -0400 http://www.finewoodworking.com/item/10935/jewelry-box http://www.finewoodworking.com/item/10935/jewelry-box Posted by nclemmons
This is a small jewelry box made over a couple of weekends.  Tapered legs and wood choice add a bit of an asian flare to the design ]]> http://www.finewoodworking.com/item/10935/jewelry-box Wed, 25 Mar 2009 23:25:53 -0400 http://www.finewoodworking.com/item/10932/bonsai-box http://www.finewoodworking.com/item/10932/bonsai-box Posted by garethhgriffith
I love the idea of the box and what can it be used for, what it can contain.  I created this Bonsai box to hold everything you might need to care for your own Bonsai. ]]> http://www.finewoodworking.com/item/10932/bonsai-box Wed, 25 Mar 2009 23:15:05 -0400 http://www.finewoodworking.com/item/10875/driftwood-box http://www.finewoodworking.com/item/10875/driftwood-box Posted by jeffsech
This box is one of a series I built to commemorate a group vacation my wife and I and our friends took to Galveston, Texas, last summer.  I built one box for each family from driftwood I... ]]> http://www.finewoodworking.com/item/10875/driftwood-box Wed, 25 Mar 2009 22:53:34 -0400 http://www.finewoodworking.com/item/10172/tibetan-box http://www.finewoodworking.com/item/10172/tibetan-box Posted by garethhgriffith
I aquired these Tibetan chimes called tingshas on a trip to India and knew that they needed a home.  I thought of the Tibetan architecture that I saw when I was in the foothills of the Himalayas... ]]> http://www.finewoodworking.com/item/10172/tibetan-box Wed, 25 Mar 2009 22:40:17 -0400 http://www.finewoodworking.com/item/10919/jewelry-armoire http://www.finewoodworking.com/item/10919/jewelry-armoire Posted by carpenterfred
eclectic and wild spalted maple ]]> http://www.finewoodworking.com/item/10919/jewelry-armoire Wed, 25 Mar 2009 22:02:19 -0400 http://www.finewoodworking.com/item/10648/the-suspended-box http://www.finewoodworking.com/item/10648/the-suspended-box Posted by Leopardwood
I wanted the legs to appear to be holding up the top and the box itself to look as if it was suspended. The sides are mahogany, embedded with maple and paduk. The top is lacewood. nbspnbspThe... ]]> http://www.finewoodworking.com/item/10648/the-suspended-box Wed, 25 Mar 2009 21:59:44 -0400 http://www.finewoodworking.com/item/10907/jewelry-chest-for-megan http://www.finewoodworking.com/item/10907/jewelry-chest-for-megan Posted by dengibson
This case is made of Cherry and Yellow birch. The cherry was cut about 1962 from my fathers farm. Size 19" high 16" wide and 8" deep. Finish:  polyacryllic .  Built for Granddaughters high... ]]> http://www.finewoodworking.com/item/10907/jewelry-chest-for-megan Wed, 25 Mar 2009 21:26:03 -0400 http://www.finewoodworking.com/item/10862/mobile-drafting-kit http://www.finewoodworking.com/item/10862/mobile-drafting-kit Posted by spider1118
I built this drafting box out of necessity.  It contains all of my drafting tools as well as a knock-down stand that I set up next to the drafting table where I'm working.  The box is made... ]]> http://www.finewoodworking.com/item/10862/mobile-drafting-kit Wed, 25 Mar 2009 20:57:50 -0400 http://www.finewoodworking.com/item/10888/jewelry-box-cube-cherry-and-birds-eye-maple http://www.finewoodworking.com/item/10888/jewelry-box-cube-cherry-and-birds-eye-maple Posted by asf
Dimensions:  Approximately 8" each side. ]]> http://www.finewoodworking.com/item/10888/jewelry-box-cube-cherry-and-birds-eye-maple Wed, 25 Mar 2009 20:37:08 -0400 http://www.finewoodworking.com/item/10882/heavy-with-fruit http://www.finewoodworking.com/item/10882/heavy-with-fruit Posted by alin74
Bandsaw box build out of a single 2x4 (2.57$ at Home Depot). I always challenge people at art shows to guess what is made of and they are always shocked when I say is construction grade pineI... ]]> http://www.finewoodworking.com/item/10882/heavy-with-fruit Wed, 25 Mar 2009 20:36:37 -0400 http://www.finewoodworking.com/item/10876/jewelry-box-birds-eye-maple http://www.finewoodworking.com/item/10876/jewelry-box-birds-eye-maple Posted by asf
Dimensions:  18" width, 10" height, 8" depth     ]]> http://www.finewoodworking.com/item/10876/jewelry-box-birds-eye-maple Wed, 25 Mar 2009 19:17:36 -0400 http://www.finewoodworking.com/item/10856/jewelry-box http://www.finewoodworking.com/item/10856/jewelry-box Posted by TommyROLAND
Veneered in Padauk and Maple Burl on Spanish Cedar and inlaid with Ebony. All end-grain joints are splined together.  Lined with red and black velvet cloth and finished in clear... ]]> http://www.finewoodworking.com/item/10856/jewelry-box Wed, 25 Mar 2009 18:41:28 -0400 http://www.finewoodworking.com/item/10681/roses http://www.finewoodworking.com/item/10681/roses Posted by sincerbeaux
One of my first jewelry boxes employing many of the veneering techniques I learned from Paul Schurch.  I have always been inspired by curves and especially "bombe" shapes. nbspWoods... ]]> http://www.finewoodworking.com/item/10681/roses Wed, 25 Mar 2009 17:58:52 -0400 http://www.finewoodworking.com/item/10845/treasure-chest http://www.finewoodworking.com/item/10845/treasure-chest Posted by birdmn
This was a fun, quick little project made for a good friend's sons fifth birthday. The wood was salvaged from a pallet made of meranti. I used a wood burner and files to further distress... ]]> http://www.finewoodworking.com/item/10845/treasure-chest Wed, 25 Mar 2009 17:58:08 -0400 http://www.finewoodworking.com/item/10841/octagonal-keepsake-box http://www.finewoodworking.com/item/10841/octagonal-keepsake-box Posted by TommyROLAND
BOX IS VENEERED INSIDE AND OUT AND INLAID WITH EBONY. BURGUNDY VELVET IN TRAY AND BOX BOTTOM.   ]]> http://www.finewoodworking.com/item/10841/octagonal-keepsake-box Wed, 25 Mar 2009 17:00:46 -0400 http://www.finewoodworking.com/item/10586/greene-and-greene-inspired-jewelry-box-2 http://www.finewoodworking.com/item/10586/greene-and-greene-inspired-jewelry-box-2 Posted by brianscot
A jewelry box inspired by the letter writing box from the Greene and Greene Freeman Ford residence.  The materials are teak, ebony, alder, snake skin wood, and leather.  The entire box is... ]]> http://www.finewoodworking.com/item/10586/greene-and-greene-inspired-jewelry-box-2 Wed, 25 Mar 2009 15:04:59 -0400 http://www.finewoodworking.com/item/10820/cello-box http://www.finewoodworking.com/item/10820/cello-box Posted by MuesliMama
I'm a cello maker and have lots of scraps from pegbox cut-offs.  So I thought it would be cool to make a different sort of box from what I had lying around.  I tried to include some of the... ]]> http://www.finewoodworking.com/item/10820/cello-box Wed, 25 Mar 2009 14:12:08 -0400 http://www.finewoodworking.com/item/10807/burl-hog http://www.finewoodworking.com/item/10807/burl-hog Posted by Qball339
I am new to the world of woodworking, and I am definately hooked. This is my third project with many to come. This box is made of mahogany, myrtle burl, and macassar ebony. Its dimensions are 8"x 5"x... ]]> http://www.finewoodworking.com/item/10807/burl-hog