Subscribe to RSS feed
Plant Stand
This was made using Purpleheart and Hard Maple. It is approximately 30 inches tall. There is an inside outside turning and a segmented style glue up in the column. It is finished with multiple coats...
view details
Custom Turned duck and goose calls
These are some of my custom turned duck and goose calls
view details
_sqm.JPG)
Rings of things
This is part of a series called rings of things. The bowl is maple, the ring is beech, and there are several different species in the marquetry.
view details
Pyramid supported vessel
2 commentsThis piece, with a terrible title, has a bit of an Art Deco feel to it, as well as a sort of faux-Aztec vibe. Or maybe "The Day the Earth Stood Still". It's made of rosewood (I think), tiger stripe...
view details
OASIS
14 commentsFrom a North Carolina Live Oak crotch burl trimmed with segmented rings of brazilian cherry and white oak. Stands 14 inches tall and 13 inches in diameter.
view details
Maple Mahogany and Purple Heart bowl
1 commentThis is my first turning project a maple, mahogany, and purple heart bowl that i made in my high school wood shop as a birthday gift for my mom. I coopered the sides together and finished it...
view details
Shallow Acacia Bowl
A clean, elegant bowl with very interesting grain. In undercut the bottom at a very shallow angle so that the bowl appears as if it is floating. It is finished with a turner's polish...
view details
Maple Burl Box
This is the first turned object that I drew a design for before I turned it. I finished it with my Magic Mojo, a wax and oil mixture that I am selling at the local Woodcraft store. I love the gleam...
view details
Redwood Burl Platter with Bark Inclusion
2 commentsThis platter is turned from a hunk of California Redwood burl. The bark inclusion on the rim gives it an artistic kick
view details
Round Mirror with Carved Rim
This round mirror made from African Mahogany with a carved diamond detail around the rim is based on an example produced by Charles Shackelton
view details
Figured Walnut and Ebony Hollow Form
Walnut crotch wood hollow form with an ebony finial. It's about 9" wide and 7" tall.
view details
Natural Edge Box Elder Burl Bowl
4 commentsThis bowl was made from a piece of box elder burl sent to me by a friend in Utah. (Thanks, Curt.) It's about 9" wide and 5" tall.
view details
Small Vase
2 commentsIt doesn't happen often, but when I picked up this piece of wood I could see exactly it was going to be. Redwood Burl with Ebony finish.
view details
Harry Potter Wands
6 commentsI turned these 15 1/4” long magic wands of Harry Potter influence for my eight-year-old daughter who is just finishing the 7th book. The top wand is made from highly figured...
view details
Spalted Sugar Maple Bowl with Tap Hole
This turned bowl is made from a spalted sugar maple log from New Hampshire. By chance, the perimeter features an abandoned maple syrup tap hole.
view details
Segmented Gentlemans Pen
1 commentThis is a segmented pen I made from Holly, Bloodwood, and Ebony. I first made a lamination of the three woods. Then I drilled the holes for the tubes. After that I cut the...
view details
Small Urn
Walnut Urn - My own design. 8"tall x 4"dia. Three coats of wipe on poly, with steel wool rub out between coats. Turned from a walnut tree that had been standing dead for seven years. This was the...
view details
Turkey Call w/Photo
This was a special hand-turned Turkey call made from Padauk, it is really small bowl turning where the inside of the bowl gets a friction Surface and a resonating soundboard attached to a pedistal...
view details
About this Contest
UPDATE: Congratulations to Bill Wyko (aka Sandtazam) of Tucson, Ariz. who wins this gallery challenge with his Monsoon turning.
