Subscribe to RSS feed
Coffee pot
4 commentsTurned and carved from figured maple. Form copied from 18th century silver piece.
view details
Cherry Ginger Jar
1 commentCherry Ginger jar with Spalted Maple and Ebony Inlay - open
view details
12 Woods Segmented Bowl
A bowl made for a friend. Made of small pieces left over from other projects.
view details
17 Woods Bowl
This bowl was constructed of 17 different woods. All of the materials were leftovers from other projects.
view details
Carved Vessel
3 commentsTurned and carved vessel of figured maple from a large dead tree in my yard. Completely hand carved and sanded. About 10" tall. Finished in 15 coats of lacquer and buffed to a glass finish
view details
"Smoldering burl"
Australian Coolibah burl with burnt top lip. I cut grooves in the top lip after burning with a blow torch. This gives the effect of clean red stripes within the blackened lip of this...
view details
Wrinkled Madrone Burl
2 commentsThis is a little hollow form I turned to finished thickness while wet, then I let it do whatever moving it wanted to do as it dried. It's about 4 1/4" wide by 3 3/4" tall, and it's a very tactile...
view details
Rain Mountain and Butterflies
Rain Mountain and Butterflies. A remembrance to the Navajo that died at Big Mountain.
view details
Pattern #1
1 commentMade from a single plank of Honduran Mahogany. It required 40 separate turnings. Final size of the object is 13" x 22". I Got the inspiration for it from a piece by Terry Scott, A New Zealand...
view details
Natural Edge Eucalyptus
1 comment10" diameter. Made from wood salvaged from a road widening project.
view details
Staved Mesqiute and Desert Ironwood Vase
1 comment14.5" x 5". The mesquite body was turned green, dried, then sliced into segments, and the Ironwood accents inserted. Then it was turned to final form.
view details
Lamplight turned inside out
This project was made of four 4x4x50 inches Itaúba blanks, glued together, and than turned in two places and in the edge that will become the internal hole where I passed the wiring. After...
view details
"Flicker and Ashes"
This figured redwood and African ebony vase stands 12" tall. Please visit www.vasetuner.com to enjoy many other of my vase photos. Feel free to use the "contact me" button with...
view details
Dinning Room Table Base
1 commentThis was an Elm Log that I rolled up onto my Oneway .. with some help from my friends. I pre carved some of the mass out with a chain saw on the out side ... I turned between Centers and using...
view details
Plant Stand
This was made using Purpleheart and Hard Maple. It is approximately 30 inches tall. There is an inside outside turning and a segmented style glue up in the column. It is finished with multiple coats...
view details
Spring Vase
2 commentsVase in Ash, Coloured with Chestnut Sprit stain, then gloss laquer. 8 inches High
view details
Catalpa Hollow Form
This piece is made from Northern Catalpa wood. It is approximately 5" tall and 6" in diameter. I used Ellsworth style hollowing tools to hollow the inside. The finish is several coats of...
view details
|
|
About this Contest
UPDATE: Congratulations to Bill Wyko (aka Sandtazam) of Tucson, Ariz. who wins this gallery challenge with his Monsoon turning.
FineWoodworking.com and StartWoodworking.com are part of
the Taunton Home and Garden Network
|
|
|
|
Taunton Home | Books & Videos | Contact Us | Product recall information
Privacy Policy | Copyright Notice | Taunton Guarantee | User Agreement | About Us | Work for Us | Contact Us | Advertise | Press Room | Customer Service | Subscriber Alert
© 2013 The Taunton Press, Inc. All rights reserved.
