Subscribe to RSS feed
TRESTLE TABLE
3 commentsTHIS IS A TRESTLE TABLE WITH THE TOP OF QUARTER SAWN WHITE OAK AND THE REST OF QUARTER SAWN RED OAK. THE RED OAK WAS ON OUR BACK PROPERTY WHICH WAS CUT, AIR DRIED,KILN DRIED AND FINISHED MILLED IN MY...
view details
Bridge to somewhere
2 commentsSofa table 60" long x 12" deep x 30" tall. Tiger Maple top with a Mahogany centre line. Cherry legs with ebonised Ash rails.
view details
Arches coffee table
1 commentI was very pleased with how this design turned out. The wood is cherry and the little turned wood cylinders are maple burl and they are functional as well as aesthetic as they re-enforce the arches...
view details
Pedestal end table
This end table is made with Walnut pedestal base and had a zebrawood top. 17"w x 20"D x 23"H
view details
Half Moon Table
1 commentThis three legged demilune table (half moon table) is made with a zebrawood top and maple legs. The wood used for the apron is zircote. 29 1/2"W x 13 1/2"D x30 H
view details
Semi-circular hall table
This small hall table (80 cm high x 60 cm wide) is made of ripple sycamore, with a curved apron of brick-built lime veneered with spalted beech. It is my own design, inspired by Steve...
view details
Occasional Table
1 commentThe table is made of Black Walnut which is dyed and the top is a 12 way match of Black Walnut veneer. There is a stylized flower carving suspended from the front edge of the top.
view details
African Mahogany Bridgetable With Tung Oil Finish
2 commentsMy wife owned a fifty years old African mahogany bookcase, made in Nairobi, Kenya made by a well known furniture maker, named Mac Crea. The wood is beautiful, but the bookcase was too big for our...
view details
Ketcham Dining Table
12 seat dining table in 12/4 black walnut and zinc veneer over plywood torsion box frame. This table weighed over 700 lbs when completed. Top and base are joined together with tenons and screws. The...
view details
MY LADYS TABLE
2 commentsTHE DARK TABLE I BUILD ABOUT 35 YEARS AGO OUT OF PINE AND FINISHED IT WITH STAIN AND SHOE POLISH THE LIGHTER COLORED TABLE IS OAK STAINED AND VARNISH AND ABOUT 15 YEARS OLD BOTH WHERE MADE FOR MY...
view details
Side Table with storage
Made of tiger maple, walnut, ebony, and padauk. The bottom is a storage compartment. Banding is home made of padauk, ebony, and tiger maple. Center portion of top is free...
view details
Dining Table & Bench
1 commentSecond project ever completed. 80" x 40" Solid walnut trimmed with wenge. Finished with tung oil and wax.
view details
Expanding Table
1 commentThis is a project for a client looking for a long dining table for a narrow space that could easily expand in width. The client also wanted the leaves to be integrated into the table and expand...
view details
Fancy Eating Table Outdoors
I made this table after the wife complained that she could not find a table big enough to hold our friends and family at our outdoor gatherings. Store bought tables were too darned expensive...
view details
Griffin Table
24 commentsThis piece of furniture took me around 1100 hours to make. Carving and marquetry added to a piece of furniture can really take you back in time. When designing this piece I really wanted to add...
view details
Figured Elm Dining Table
Table featuring figured Elm top. Base is ebonized Maple and constructed with bridle joints. Finish is matte 2 part poly.
view details
Victorian Kitchen Worktable
We had some 1 inch pine floorboards left from new house construction which I saved for this project. The turned ash legs were bought as I don't have a lathe. Aprons are 3/4 x 7 birch, I cut the 1 x 4...
view details
Oval Coffee Table
This coffee table is made from Mulberry with a surround of Red Oak and inlay of Purpleheart and white oak.The table was actually built because of the Red Oak. I salvaged an old weather beaten fence...
view details
Butcher Block Table
1 commentThe top for this cutting board table is made from a maple counter which was cut into short lengths and glued together to make a 24in X 18in net size . Two threaded rods extend through the...
view details
Tip-Top Sewing table
1 commentTip-Top Sewing table 60" by 24" and the top tiped up it's 60" by 48' The leg swing out to hold up the tip-up top Made of maple plywood top, western maple and oak ply sides with walnut trim. Shellac...
view details
Side Table
image image This book shelf was designed and built for a neighbor. It had to fit into a corner next to their buffet and under a window. I copied the scroll design from the buffet to tie them...
view details
Dinning room table suite
4 commentsThis a soild cuban mahagony dinning table and chairs I built. The chairs have hand carved/shaped seats. The table is 40 inches wide and 86 inches long. There are eight chairs with the set. The top...
view details
Congratulations to our winner!
Congratulations to our winner Chad Hill. Click here to view his Baptismal Table.
Grand Prize:
Apollo Power Series Model 835 Turbine system with an Apollo Model 7500 AtomiZer gun
Approximate Retail Value: $1147.00 (US$)
Contest Ended June 30, 2010
Read the Official Rules













