Subscribe to RSS feed
TRESTLE TABLE
4 commentsTHIS IS A TRESTLE TABLE WITH THE TOP OF QUARTER SAWN WHITE OAK AND THE REST OF QUARTER SAWN RED OAK. THE RED OAK WAS ON OUR BACK PROPERTY WHICH WAS CUT, AIR DRIED,KILN DRIED AND FINISHED MILLED IN MY...
view details
Bridge to somewhere
2 commentsSofa table 60" long x 12" deep x 30" tall. Tiger Maple top with a Mahogany centre line. Cherry legs with ebonised Ash rails.
view details
Arches coffee table
1 commentI was very pleased with how this design turned out. The wood is cherry and the little turned wood cylinders are maple burl and they are functional as well as aesthetic as they re-enforce the arches...
view details
Family Table and Benches
1 commentMatching curves table and benches. 36" x 72" table with solid legs. Natural finish with clear semi-gloss finish. Cusomer initials in end skirt of benches.
view details
motion coffee table
4 commentsI made the 23' x 46" coffee table out of maple for my brother. I glued the top up using a glue up station I built from an article in a Fine Woodworking issue a few years ago My shop is only 10' by 16...
view details
Pedestal end table
This end table is made with Walnut pedestal base and had a zebrawood top. 17"w x 20"D x 23"H
view details
Half Moon Table
2 commentsThis three legged demilune table (half moon table) is made with a zebrawood top and maple legs. The wood used for the apron is zircote. 29 1/2"W x 13 1/2"D x30 H
view details
Semi-circular hall table
This small hall table (80 cm high x 60 cm wide) is made of ripple sycamore, with a curved apron of brick-built lime veneered with spalted beech. It is my own design, inspired by Steve...
view details
Occasional Table
1 commentThe table is made of Black Walnut which is dyed and the top is a 12 way match of Black Walnut veneer. There is a stylized flower carving suspended from the front edge of the top.
view details
tv table,soft maple,cabranet stain with casters
Louis philpe style tv table to match a set of furiture.
view details
African Mahogany Bridgetable With Tung Oil Finish
2 commentsMy wife owned a fifty years old African mahogany bookcase, made in Nairobi, Kenya made by a well known furniture maker, named Mac Crea. The wood is beautiful, but the bookcase was too big for our...
view details
shaker inspired cherry hall table
1 commentThis is a shaker inspired table I built for friends. The table is made of cherry and has wenge beading around the bottom of the skirts. The drawer is cut directly from the skirt and the...
view details
First Table Ever Made
3 commentsThis is the second piece of furniture I've ever built. The first I fully desgin on my own. The table is made of solid maple with the exception of the table top which is maple plywood...
view details
Saturday Night / Sunday Morning Convertable Poker Table
The challenge that I set for myself in this design was to make a convertable table in which no parts had to be stowed away when in gaming mode. The felt top is is housed in quarter...
view details
Ketcham Dining Table
12 seat dining table in 12/4 black walnut and zinc veneer over plywood torsion box frame. This table weighed over 700 lbs when completed. Top and base are joined together with tenons and screws. The...
view details
MY LADYS TABLE
2 commentsTHE DARK TABLE I BUILD ABOUT 35 YEARS AGO OUT OF PINE AND FINISHED IT WITH STAIN AND SHOE POLISH THE LIGHTER COLORED TABLE IS OAK STAINED AND VARNISH AND ABOUT 15 YEARS OLD BOTH WHERE MADE FOR MY...
view details
Side Table with storage
Made of tiger maple, walnut, ebony, and padauk. The bottom is a storage compartment. Banding is home made of padauk, ebony, and tiger maple. Center portion of top is free...
view details
Dining Table & Bench
1 commentSecond project ever completed. 80" x 40" Solid walnut trimmed with wenge. Finished with tung oil and wax.
view details
Coffee Table
1 commentFirst piece I ever built. Solid red oak top, box legs. Plan on refinishing it at some point with what I have learned since.
view details
Expanding Table
1 commentThis is a project for a client looking for a long dining table for a narrow space that could easily expand in width. The client also wanted the leaves to be integrated into the table and expand...
view details
Fancy Eating Table Outdoors
I made this table after the wife complained that she could not find a table big enough to hold our friends and family at our outdoor gatherings. Store bought tables were too darned expensive...
view details
Simple Garden Bench
I made this bench from scrap lumber I found in a ditch. Painted bright red later per my daughters request.
view details
Griffin Table
25 commentsThis piece of furniture took me around 1100 hours to make. Carving and marquetry added to a piece of furniture can really take you back in time. When designing this piece I really wanted to add...
view details
|
|
Congratulations to our winner!
Congratulations to our winner Chad Hill. Click here to view his Baptismal Table.
Grand Prize:
Apollo Power Series Model 835 Turbine system with an Apollo Model 7500 AtomiZer gun
Approximate Retail Value: $1147.00 (US$)
Contest Ended June 30, 2010
Read the Official Rules
FineWoodworking.com and StartWoodworking.com are part of
the Taunton Home and Garden Network
|
|
|
|
Taunton Home | Books & Videos | Contact Us | Product recall information
Privacy Policy | Copyright Notice | Taunton Guarantee | User Agreement | About Us | Work for Us | Contact Us | Advertise | Press Room | Customer Service | Subscriber Alert
© 2013 The Taunton Press, Inc., Part of Taunton’s Men’s Network. All rights rserved.
