Subscribe to RSS feed
Wife's Demilune Table
1 commentMy wife asked for a Half-moon table. She asked if I could make the top out of Zebrawood, of course I said yes. This gave me a chance to work with a type that I have notnbspused...
view details
Domino Table
1 commentThis is a domino table that I made for my father in law. On his last visit he told me he wanted a domino table so I took him to the local flea market to pick one up but he wasn't particularly...
view details
Walnut One-Drawer Lamp Stands
4 commentsThese are two tables I made as Christmas gifts, one for my parents and the other for my sister. They are my second and third woodworking pieces completed. All surfaces were hand planed to...
view details
Shaker Inspired Table: Walnut and Ash Burl Veneer
This is another variation of a table inspired by my father. Featuring walnut tapered legs and aprons connected by mortise and tenon joints. Ash Burl Veneer Top is framed with walnutFinish...
view details
Pie Crust tea table for daughters
This is a pie crust tea table I made as a Christmas present for my two daughters. They liked having tea parties so I thought they should have a table for it. It is made from walnut with a shellac...
view details
Open Segmented Walnut-Oak Bowl
This "Open Segmented Walnut-Oak Bowl" was made following glue-up using a router and sanders. The bowl has 12-segments, it is 10" in diameter, 3.5" deep and required approximately 10-to-12 hours to...
view details
2008 Christmas Gifts
I made 24 of these small desk clocks for Christmas gifts. Most are for my husbands employees, but a few went to family and friends. The clocks were my own design, made from maple. The majority of...
view details
Granddaughters Crib
4 commentsSleigh Crib is made out of walnut and rift walnut veneers. The rosette carvings were a purchased item. The finish is dye stains and laquer.
view details
Macassar Ebony Credenza
1 commentMacassar ebony veneers on appleply as well as in solid form. Entire inside is veneered with bird's eye maple. Handles feature abalone accents. Legs and aprons are solid walnut, end grain...
view details
Golf bal display
I asked my step dad if I was to make something for him what would he like. His request was for a golf ball rack. So I asked him if he had any idea what he wanted it to look like. He...
view details
Black Walnut Tool Chest
My father had a large Black Walnut tree cut up for lumber over 15 years ago but had yet to use the wood. I "borrowed" several boards and surprised him with this tool chest for Christmasnbsp...
view details
Keepsake Box
1 commentNormal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 ...
view details
Ash and Hickory turned Christmas trees
Ash and Hickory stock glued up into solid blocks approximately 7" x 7" X12" Base and tree topper star are Walnut, decorative circles simulating ornaments are burned into the wood.
view details
Soild Walnut gun case
Here is some pictures of a Walnut gun cabinet that I made for my brother. This was the first large furniture project I have attempted and it took over 80 hours which seemed more like...
view details
grandmothers opposing photo albums
1 commentThese photo albums were made for my son's grandmothers. Made from a single peice of black walnut from my local saw mill (TC Woods, Lafayette, CO). Cheap hardware store hinges, cheaper...
view details
Drawing Board
This is a 22" square drawing board. It was made for my granddaughter to allow drawing while laying on the floor. She likes butterflys. (Drawing paper provided by others.) The...
view details
Dragonfly box
2 commentsThis box is for my wife, it is made out of Walnut,Alder,Macassar Ebony,Curly Maple and Padauk. I thought I'd use up some scraps. It is finished with Watco oil.
view details
One Piece Yo-Yo
Yo-Yo's make great gifts! These are turned on a lathe and are all variations of the "One Piece (no glue) design" by Yo Yo Spin. Finished with salad bowl finish or Danish oil.
view details
Salad Bowls and Rolling Pin
2 commentsI have been turning seriously one year. For Christmas I produced 5 salad bowls of stay-segmented walls and a solid bottom from walnut. There are 16 segments in the walls. I also...
view details
Wine Bottle Pepper Mill and Salt Shaker
I have made several of these for gifts using various combinations of wood species. They are very well received. They are turned by hand and personalized at the localnbsplaser...
view details
Walnut pen for soldier in Afghanistan
1 commentPhoto taken of one of my pens sent to a Soldier in Afghanistan.
view details
Congratulations to our two winners!
Congratulations to our two winners Keith Burns from Collierville, TN for his
Segmented Leopardwood Hollow Form and Jordan Durbin from Arcade, NY for his Double Highchair
