Subscribe to RSS feed
Desk
2 commentsThe desk is made of solid African padauk and hard maple. In the joints pins are router cut and tails are hand cut. Breadboards are tenoned and glued only in the middle to allow the top...
view details
cd shelfs
1 commentCd case is stablized by through, wedged tenons on the bottom shelf and a honey locus branch tenoned and wedged at the top. The wedges are bubinga.
view details
Carving Table
2 commentsThe carving table is made from maple, cherry, and walnut. It is made to be collapsable because the weight of the top makes it difficult to move yet it is very stable. It was designed to be...
view details
Bed Frame
2 commentsI graduated college in 2005 and decided it was time to leave the air mattress and 2x4 bed frames behind. This had numerous first attempts for me and though I would probably change the design a little...
view details
QSWO Blanket Chest
1 commentI made this blanket chest as a wedding gift for my Brother-In-Law and his new bride. It's made of rift and quarter-sawn white oak, with a cedar lining. With a breadboard top, raised...
view details
Ebony and Maple Entry Way Table
This arts and crafts hall table was made from maple and ebony and crafted on Google Sketchup. The dovetails are handsawn, the mortises are hand-chiseled. This is the first piece of...
view details
cocobolo chair
3 commentsChair made of cocobolo pegged tennons and bridle joints obvious inspiration
view details
Rustic Dining Table with Knock-down Base
Rustic dining table with knock-down base featuring breadboard ends, integral through-tenons, and loose wedge/tusk tenons.
view details
Dining Buffet and Hutch
This was taken off The Shaker Bookcase from New Yankee Workshop. I made two units, then made an extended unit for the center base and added a wine rack for the center. An 11 foot piece for the top...
view details
Demilune Tables
I designed and built these demilune tables for my wife and my two daughters. They are 24" high by 26" wide by 13 1/2" deep. They're constructed in black walnut, and finished with four...
view details
Walnut Shop Stool
I needed a shop stool, and did not have a lathe, being a woodworker, there is always a way to solve a problem.
view details
Gamble House Entry Table
1 commentMy interpretation of the Greene and Greene/Gamble House entry table Made of cherry with ebony accents Drawer joinery accomplished with techniques similar to box joint joinery first by roughing...
view details
Tool Tote
2 commentsArts & Crafts tool tote with Greene & Greene style pegged joints. The woods used are walnut and lyptus. The pegs are ebonized walnut. The box joints were hogged out with a...
view details
End Table
Floating style top of mahogany with pine shoji style legs. All through mortise construction. The top is in two pieces.
view details
Night Stand Table
This night stand is made from red oak and walnut. The legs have a strip of walnut laminated in their center. The walnut drawer front is accented by oak through dovetails. The lower shelf is cut away...
view details
Wine Rack
2 commentsThe dovetails were hand cut. Butterfly keys were router cut and filled with a low melt point metal and are decorative, not structural. Base joinery is a modified bridle joint using...
view details
S.:E:.ARMCHAIR
3 commentsA pair of mahogany armchairs. With a coopered back rest and rosewood feet.
view details
Mission-Style Family Altar
Both the altar and the cross are constructed of Quarter-Sawn White Oak. The top of the altar is book-matched. Each leg of the altar is constructed in true Stickley-style so that each side exhibits...
view details
Congratulations to our winner!
Congratulations to our winner David Mathias from Dublin, OH. Click here to view his Gamble House Entry Table
