Hybrid plunge router has plenty of power

SUMMARY REVIEW

I often marvel at the explosion of new tools that has hit the market since I first took up woodworking some 30 years ago. The new T4 plunge router from Trend is a good example—a sort of hybrid size that falls between a full-blown bench router and a much smaller trim router.

It weighs just under 8 lb., with a motor rated at 6.6 amps (850 watts, 1.1 hp). After giving the T4 a good workout in my shop, I was impressed by the performance. I tested it on plywood and lumber with several types of bits, including a 13/16-in.-dia. rabbeting bit (the largest size Trend recommends for this router). The T4 had plenty of power. Changing bits was a breeze, using a single wrench and the spindle lock provided.

The top of the motor has a speed-control dial ranging from 11,500 to 32,000 rpm, convenient for fine-tuning the tool to the task at hand. The 4-in. by 5-3/4-in. base can accommodate a guide fence, which is included.

The T4 sells for $130. For more information, including dealer locations, go to www.trend-usa.com.

Editor Test Results

Become a member for more in-depth information:

Router Combo Kit Tool Review

Tool Test: Routers for Router Tables

Midsized Plunge Routers

Laminate Trimmers