A shooting board for case miters
Build a shooting board that allows you to rough out case miters on the tablesaw and then plane them to perfection
Synopsis: Build a shooting board that allows you to rough out case miters on the tablesaw and then plane them to perfection. It starts with a solid, stable base. Add a runway that’s exactly 45° and a fence that’s exactly 90° to the runway, and you are on the way to achieving perfect case miters.
I ’ve always had trouble cutting long case miters accurately with a tablesaw. But I’ve had success roughing out square cuts and frame miters with the tablesaw and then refining them with a shooting board, so I thought the same process would work for case miters. After a few sleepless nights working out the details, I made this shooting board. I’m happy to say that it works perfectly.
This shooting board is easy to make, easy to store, and easy to adjust. I rough out case miters at the tablesaw and then plane them to perfection with the shooting board. I use a smoother, but a jack plane would do a great job, too. Here I’ll give you the plans and instructions for building it, and show you how to dial it in for perfect miters.
Accurate runway is the key to success
There is no doubt that the most challenging step in building this shooting board is making a runway with a perfect 45° reference face. The best way is to first roughcut the angled face with the tablesaw and then perfect it with a handplane.
Start with a hardwood blank that’s much wider than the runway’s final width. This way, you can recut the face on the tablesaw if you make a mistake. When planing the face, check your work with a combination square. You want the face to be 45° and the runway to be flat along its length. After…