Reader's Gallery

showing 1 - 32 of 406 posts matching walnut [X]
1 2 3 Next > Last

Sort By:

kids chair and table set

Wonkey, member | March 15th, 2010

Cherry ply table with walnut & cherry legs. Chairs have cherry seats with black walnut legs and back. I read somewhere that kids who grow up in an environment dominated with...

view details

Le Coeur Heureux - The Happy Heart

BilllC, member | March 11th, 20101 comment

This is a cradle I made for my new granddaughter that is modeled on a lapstrake hull dinghy. It is about 48" long and 20" wide. It has planking of Honduras Mahogany, trim in Balck Walnut and copper...

view details

Upstanding Shell

Briggs Pletcher, member | March 10th, 2010

I found this shell on the beach on a vacation to FL with the family. I was taken with its simple beauty – the lines were so sinuous and flowing – so I picked it up. When I...

view details

Stacking Bowls

Sammmmmm, member | March 10th, 2010

These stacking bowls were made from a walnut cutoff and some scrap aluminum bar stock.

view details

fence line illumination

grizz_man, member | March 10th, 2010

this is my bedside lamp. it was shaped and carved to enhance its already natural beauty. its a piece of a fence post that is antique southern heart pine. its around 400 to 600 years old and came from...

view details

Carved and Gilded Coffee Table

AlanBYoung, member | March 9th, 20102 comments

A Carved and Gilded Coffee Table. The top is made from Mahogany veneer with inlays of Anigre,Maple and Walnut. The base is Walnut with gilded carvings.

view details

Banding from tenon cutoffs

tom8021, member | March 9th, 2010

This is the ultimate use of scrap. I collect the cutoffs from doing the tenons and made banding from it. One day I was making tenons and notice all of the pieces and a light bulb went off. Why not...

view details

Walnut Box

mburke, member | March 9th, 2010

This box was made from a length of black walnut firewood, which came from a huge old tree in my parents' backyard in Western Pennsylvania. It sustained some storm damage a few years back and as a...

view details

A Classic with a Twist

flairwoodworks, member | March 8th, 2010

The top of this desk was made of 61 individual pieces of walnut salvaged from a set of chairs being thrown out. Maple accents were added to tie the top to the base which features maple legs...

view details

Walnut Entry Table

bjc1, member | March 8th, 2010

The table top arose from two pieces of walnut that seemed to go together. The top has breadboard ends and the apron and legs are mortised and tenoned. The stretcher is joined to the legs...

view details

Christmas in March

Buche, member | March 7th, 20101 comment

I finally finished the christmas present for my wife. The box consists of walnut sides and frame for the lid. Solid maple bottom with leather lining. the upper tray is solid cherry with fairly small...

view details

Walnut Entryway Seat

Senomozi, member | March 4th, 2010

This is a simple black walnut and maple entryway seat sized to fit in the available space. All solid wood construction except for the seat bottom, which is walnut veneer plywood. It will eventually...

view details

candy land coffe table

dmayo, member | March 3rd, 2010

After running out of fire wood i had to make something out of my small scraps before they all went up in shop warming smoke. Maple,cherry and walnut

view details

A modern walnut bookcase

mayoutze, member | February 24th, 20101 comment

This is my very first woodworking project, a walnut bookshelf. The idea was to end up with modern straight lines and no back in order to make it feel lighter. I added the front frame to give a...

view details

Custom Card Game Box

sixx_am, member | February 23rd, 2010

This is a walnut and wenge card holder that I made for someone. There are sliding panels for extra storage in the underside of the lid.

view details

Patchwork Coffee Table

CB1010, member | February 17th, 2010

Coffee table made from claro walnut offcuts with black walnut inlays and butterflies. Black walnut legs turned from scrap wood. Finished with Danish oil and polyurethane.

view details

Spiced Night Stand

mrwood45, member | February 15th, 2010

I was looking for a project to keep my self busy, and a friend of mine showed me a picture of a 15" spice box some how it bacame this. I don't keep detailed records of projects that I...

view details

Walnut and maple table

DougStowe, member | February 13th, 20104 comments

This walnut and maple table is made entirely with wedged mortise and tenon joints, with the exception of the attachment of the top. The two haves of the walnut top slide from the front and back onto...

view details

Hallway Table

bkryston, member | February 13th, 20108 comments

I was lucky enough to get a hold of some really figured spalted sycamore for this project. Quite amazing what a fungus can do. Though beautiful, this tree must have been days from becoming a pile of...

view details

Desk name plate

butchf18a, member | February 12th, 2010

Marguetry scraps; Birdseye maple for background, walnut and cherry inlay. Walnut frame.

view details

Classic Walnut Bookcase

ajbergren, member | February 7th, 2010

Sliding dovetail joints for shelves. Also, lots of bookmatching! Profling and curves were cut by hand using a coping saw, planes, a spokeshave, and a rasp and file. Shiplapped back boards are...

view details

Quadtych

ArneO, member | January 30th, 20102 comments

Tea box designed for a competition with a non-standard opening mechanism. The four quadrants slide out over the diagonals and are "locked" by tiny magnets. The box is made of walnut, the four lids...

view details

Walnut End Table

SRogers93, member | January 29th, 20102 comments

This is my second piece of furniture. I love the Greene and Greene style and thought trying something with the dark wood and light accents might be interesting. The center of the top is book...

view details

3-legged Stools

bob_ressel, member | January 28th, 20102 comments

I teach high school woodworking in southeastern Pennsylvania, mainly from a production point of view. This stool project is centered around the use of jigs and fixtures to drill the angled holes in...

view details

Black Walnut Wall Cabinet

John Tetreault, contributor | January 25th, 2010

Black Walnut with Tiger Maple accents. Hand carved rose and vine detail on top molding. Glass shelves and mirror back.

view details

Mid Century Modern Furniture Set in Walnut

gilmartini, member | January 23rd, 20102 comments

4 piece Mid Century Modern furniture set in Walnut, Koa and Papyrus. The DVD cabinet and one of the side tables have built in lamps. I enjoy having them on to add ambience to the room at...

view details

'Trunk - Shrub' side table

r_brou, member | January 13th, 20101 comment

The 'Trunk - Shrub' table has a bit of a split personality thanks to the reversible base that is held in place with magnets. The 'Shrub' side was the intended result with the 'Trunk' side being to...

view details

USMC Margquetry Emblem

butchf18a, member | January 12th, 201017 comments

30 years after I started service with the Marines my son elected to serve. Now a scout sniper platoon commander scheduled to deploy to Afganistan, this was made to honor our generational bonds...

view details

Walnut Mantel

wilsonandmccracken, member | January 11th, 2010

Always something fun going on at Wilson & McCracken’s This mantel is all new. The details were coordinated with the existing paneling etc. Burl panels, carved leaves and 8” tall...

view details

Walnut Newel Post

wilsonandmccracken, member | January 11th, 20102 comments

The newel post was designed and built by Wilson & McCracken. The main post is constructed of 16 tapered walnut staves. The cylinder has a band of burl inlay. The carving is typical of...

view details

Bandsaw Box

jedman, member | January 7th, 20103 comments

This is the 1st bandsaw box I ever made. I learned the technique for making bandsaw boxes using this design and instructions provided in a woodworking magazine. It is made from Walnut. The drawers...

view details

It started with a tea pot...

KingMe, member | January 1st, 20101 comment

Had a great idea for Christmas... My girlfriend, her sister and her parents love tea, so I bought them all cast iron teapots. They showed up (beautiful) in UGLY, torn cardboard boxes. Well, that...

view details

showing 1 - 32 of 406 posts
1 2 3 Next > Last

Welcome to Fine Woodworking's Readers Gallery, an online photo community where woodworkers like you can share photos of all your woodworking projects. Log in or register now to create your public profile, share photos, and comment on other photos.

CURRENT GALLERY CONTESTS:
CHECK BACK SHORTLY