Reader's Gallery

showing 1 - 32 of 140 posts matching polyurethane [X]
1 2 3 Next > Last

Sort By:

Post your project Subscribe to RSS feed

Walnut Cradle

dankolesar, member | January 30th, 20121 comment

Walnut cradle with maple stringing, made for my wife's friend that is expecting in May.

view details

Moon and Stars Table

Bluecab, member | January 23rd, 2012

This bar height table was created using a salvaged maple counter slab. The walnut moons/stars visible on the top are through tenons used to attach the top to the base (see photo #4). The maple...

view details

Triangle

podemers, member | November 9th, 20113 comments

For this one, I try the triangle form mixed with curve. It's my mini-bar now. This work is Finalist for the 2012 Niche Awards

view details

Eagle Shadowbox

chipman204, member | November 7th, 20111 comment

The eagle shadowbox project started when someone approached me to see if I could make a shadowbox in the shape of an eagle for our Commander. After looking over the details I jumped on the...

view details

Shaker cherry trestle table with leaves

Chuck_Griffith, member | October 16th, 20111 comment

Cherry trestle table similar to a birdseye table I posted earlier, except for the leaves. This table is 72" long, but it sometimes needs to be 90" long. Providing support for the leaves meant adding...

view details

Quilt Frame

Troutrx, member | October 3rd, 2011

My wife has been wanting an adjustable quilt frame for a long time. I finally got working on it a few months ago. I used scrap wood from left over projects. I used walnut, maple...

view details

Jewerly Amoire

tom012947, member | August 31st, 20111 comment

7 drawer amoire, made of Cherry with Maple drawer interiors. Firsts: dove tails, panel doors and case with that many drawers. I am an amatur, I design computer systems for a...

view details

Brazilian Cherry and Sapelle Laminate Inlay End Table

shavae, member | August 29th, 2011

This was a table that got started and then sat for months until one of my buddies spotted it. For lack of a better name we'll call it Guy's Table

view details

Walnut and Bloodwood bed

blstreet, member | July 23rd, 2011

The bloodwood inlay was surpisingly easy to bend. It is 1/4" by 1/4". I thought it was going to snap for sure. We chose an oil based floor polyurethane for the finish, which is a...

view details

Painful Box

Superman2424, member | July 22nd, 20119 comments

This is a box that has been 4 years in the making. The wood is claro walnut, curly maple, lacewood, and rosewood. It was a pain to finish as the idea came from my ex wife who wanted me to...

view details

13 Drawer Dresser

Dean2, member | July 16th, 2011

This is a 13 drawer dresser I made. It is the second piece for a seven piece master bedroom suite. The primary wood is West Indies White cedar. Secondary wood is pine. The dresser is 60 inches wide...

view details

corner wall cabinet

Troutrx, member | April 19th, 2011

This is a corner cabinet that I built. These are the first cabinets that I have made. The doors are raised panel with an arch on the top doors. Each door is 33"x24" with soft close...

view details

Custom made Memory Keepsake Boxes

RicksWoodCrafts, member | March 25th, 20111 comment

These Custom sized (to fit up to 8" x 10" photos) Memory boxes made for a terminal patient to leave for her three daughters. Built from Bubinga , Maple , Cherry , Black Walnut and spanish...

view details

Reinvented Heirloom Cradle

RicksWoodCrafts, member | March 23rd, 20112 comments

Made using solid cherry and mahogany . The main challenge with cradle was to ballance so it would sit perfectly upright . This was a custom order from a customer to give as a baby shower gift...

view details

Kitchen Project

Dean2, member | March 20th, 20113 comments

This is a project I just completed and installed. All the cabinets are solid West Indies mahogany, all cabinet door pairs have book matched panels, all drawers have dovetail joints, All cabinet...

view details

Kelly's Cabinet

CowboyKenny, member | December 28th, 2010

Krenov inspired cabinet on stand for my neice as a wedding gift. Cabinet is hickory with quilted soft maple panels. The back panels feature spalting and were resawn from the same board and...

view details

New Workbench

WBGoodwin, member | November 24th, 2010

I have wanted to build a new workbench for quite a while now. When I saw Matt's Monster Workbench in Fine Wood Working magazine, I new I had found the bench I wanted to build. His bench...

view details

Dining Room Table: just in time for Thanksgiving

Cubby, member | November 22nd, 20104 comments

We need a dining room table, so my wife, Laura, designed one. Two four inch thick planks of white pine, seasoned for four years, were sawn in half, surfaced with hand planes, sealed with...

view details

daughter's birthday gift

artison6, member | November 12th, 20102 comments

This is a birthday wish from my daughter for something "dad made" Maple onlays are by Osborne Wood Products,upholstery by "Solutions",Birmingham Ala. Upholstery is all leather All wood is...

view details

Arts and Crafts media cabinet

Michael666, member | November 7th, 20102 comments

I built this unit to store our collection of DVDs and CDs which had gotten out of hand. Its dimensions were determined by the size of a CD/DVD case and the width of our current TV.The case is cherry...

view details

"Pierrot" Ruhlmann-inspired Liquor Cabinet/Side Table

tonygony, member | November 7th, 2010

This Ruhlmann-inspired cabinet/side table's dimensions are 30.5"H X 25"W X 15.5"D. The cabinet box and table top are mahogany, the doors and legs are cherry, and the legs and doors are inlaid...

view details

MY TV CABINET

gazzatebager, member | September 30th, 20102 comments

THIS IS MY TV CABINET MADE FROM NEW ZEALAND RIMU ,USED A FEW JIGS TO MAKE DOORS FOUND THE DESIGN FOR THE DOORS FROM FINE WOODWORKING ,THANKS FOR THAT......STILL HAVE TO MAKE THE MIDDLE AS IM...

view details

Secret Bookcase

chopcatuk, member | September 27th, 20103 comments

Just an interesting idea for a secret entrance bookcase that I made for a house designed as part of my architectural day job. Straightforward construction on Oak lipped and veneered mdf, just...

view details

Small Demilune Table

zzxc, member | September 20th, 20103 comments

I’m a novice woodworker. This table was built as a gift for my office assistant using a combination of hand and machine techniques. It’s approximately 26 inches wide and 12 inches...

view details

Pedestal Table

JohnG123, member | September 17th, 20101 comment

This is my first woodworking project. It is a small pedestal table I made for my mother-in-law to display a bonsai tree. Made from cherry, it stands 22" tall, and is 13 3/4"L X...

view details

My Desk

Sam_Boyko, member | September 6th, 20101 comment

This is my fancy new desk. It took over a year to design and build but it came out good. It weighs 260lbs, but it comes apart for moving. Nice and solid. The double-tee shape of lighter wood is...

view details

Custom Wall Shelf and matching CD Rack

rlafferty, member | July 1st, 20104 comments

This project was designed and built for a client who wanted a floating shelf for tv components, dvd's, remote, etc. It had to conceal all wiring. And the finish had to match an existing pedestalAs...

view details

Asian inspired coffee table

Hansbilt, member | June 11th, 20105 comments

This coffee table is my own design and really the first big project I undertook as a woodworker. I built this table several years ago and it is still one of my favorite pieces. This table...

view details

NEW TOP FOR OLD TABLES

George D., member | June 7th, 2010

White pine table top on used rought iron frame. Finished with yellow, green and orange dye under 8 coates sprayed on Resisthane Plus Pre-Catalyzed Lacquer Clear Gloss.

view details

End Tables for my Daughter

57Chevy, member | June 4th, 20101 comment

My daughter needed two custom sized end tables to fit between her couch and walls on either end, They are made from solid red oak, the legs are glue ups of 3 pieces of 3/4 stock, then taperednbsp...

view details

nothing fancy-just the basics

artison6, member | June 4th, 2010

All parts are made from raw wood except inlay. The legs consist of mohogany sandwiched between sapele. I finished with three coats of brush on polyurathane,buffing between coats and final buffing...

view details

Bar Stool with Back rest

doucetteandwolfe, member | June 2nd, 2010

This bar stool with back rest is made of red oak with a poly finish for durability. Wedged 3/4" round tenons hold the seat to the legs. The construction of these stools is on our website...

view details

showing 1 - 32 of 140 posts
1 2 3 Next > Last

An application error was encountered.

Severity: Warning

Message: file_get_contents(http://custommade.com/feeds/xml/?keyword=wood&count=4&imgsize=150) [function.file-get-contents]: failed to open stream: HTTP request failed! HTTP/1.1 404 NOT FOUND

Filename: libraries/Module.php

Line Number: 1954

Array

Welcome to Fine Woodworking's Readers Gallery,
an online photo community where woodworkers like you can share photos of all your woodworking projects. Log in or register now to create your public profile, share photos, and comment on other photos.

Check out our brand-new SHOP GALLERY and JIGS GALLERY. Get inspired and then post pictures of your own work.

CURRENT GALLERY CHALLENGES:
Show Us Your Drawers