Reader's Gallery
Post your project Subscribe to RSS feed
Special Gift for "Mom"
This bistro set was made for my mother ( who loves cats ) for her new Ipe deck . It was yet another job I practiced many different types of joinery . I used spanish cedar and mahoganynbsp...
view details
Reinvented Heirloom Cradle
2 commentsMade using solid cherry and mahogany . The main challenge with cradle was to ballance so it would sit perfectly upright . This was a custom order from a customer to give as a baby shower gift...
view details
Rosewood and Wenge Humidor
2 commentsThis rosewood humidor has an interesting Cuban connection.
view details
Kitchen Project
3 commentsThis is a project I just completed and installed. All the cabinets are solid West Indies mahogany, all cabinet door pairs have book matched panels, all drawers have dovetail joints, All cabinet...
view details
"Pearls of Wisdom" dining table, mahogany, inlaid dyed resin, LEDs
1 commentI call this material my "RiverMaterial(tm)". The dyed resin is inlaid into the wood (and other materials) and polished and textured to provide glowing light to the room's atmosphere. I...
view details
coffee table
4 commentsLatest commission. Peruvian mahogany carcass, ebonized cherry base, Tasmanian tiger rose myrtle veneer drawer fronts. Hand cut dovetails. A very satisfying project.
view details
Fleeting
3 commentsTitle: Fleeting Dimensions: 54 wide,19 tall, 7.5 deep. Materials: Mahogany, cherry, steel, brass, string This piece is part of a series that represent taking what I have learned and...
view details
Greene and Greene Media cabinet
1 commentThis is a Greene and Greene inspired media cabinet. It is made of Honduras and African Mahogany and Ebony accents. The finish is alcohol stain, shellac, gel stain and lacquer.
view details
Bed for Kathryn
This is a bed I made as an anniversary present for my wife Kathryn. The bed is made of solid Houndras Mahogany with accents of Anagre, Embua burl and ebony. I used Mortice and tenon, Festool...
view details
My First Jewelery Box
2 commentsNo plans were used. I just new what I wanted it to look like. Solid mahogany except for the center cubby . It has maple sides and bottom. 3 drawers each side with a tilt out on each. Bifold...
view details
Basket. Bleached red oak, mahogany, poplar
This is a basket made by scroll sawing and carving to clean it up. The piece is unfinished to make the basket weave more realistic. I put just a couple of drops of lemon oil on the...
view details
Hallway Chair
This chair is based on an antique chair in my mother's hallway that I have always liked. Does anyone know what type or style of chair this is? I have made 6 of these chairsnbsp...
view details
Three Leg Chair
3 commentsThis chair was a bit of an experiment and an opportunity to practice bent laminations and making a carved seat. It is made from re-used mahogany baseboard, door casing and door...
view details
Rohlfs Inspired Desk Chair 1
1 commentThis chair is based on a Charles Rohlfs desk chair design, much simplified. The chair is made from re-used 3" mahogany baseboard and 2 "door casing, which was planed down to 1/4 thickness and...
view details
Mahogany End Table (with cocobolo inlay)
A mahogany table with cocobolo inlays. This table comes from the simplistic design with the stunning wood, inlayed top, and continuous bead of cocobolo running around the legs and the...
view details
Nolan Dining Room Chair
Figured Mahogany dining room chairs. These graceful chairs perfectly complement their parent table (Nolan Table) with their leather upholstered seats, gracefully curving legs, and hand...
view details
Interior Makeover from Port Townsend Washington
This is the work of Chris Cantrell of Cantrell Woodworks Inc., Port Townsend, WA. Chris' passion and challenge is to design incorporating a variety of media, such as glass, steel, and wood, with...
view details
Greene & Greene Mahogany Desk
1 commentGreene and Greene is a distinctive style popular in the Arts and Crafts movement. This desk displays key elements of the style such as: curves in the wood top are cut in the "cloud style" and...
view details
Nolan Dining Room Table
This dining room table was made out of highly figured Mahogany, also known as "Ribbon Striped". The base has gracefully curving legs that lead up to the apron which is reminiscent of Japanese...
view details
Greene & Greene Custom End Table
2 commentsThis is one of the many custom tables i have made . This one was built for Truly Nolan in Naples,Florida in 2008 and was made out of mahogany with rosewood inlay, and built in the Greene amp...
view details
Hepplewhite Mahogany Pembroke Table
6 commentsA mahogany Pembroke table with Satinwood bellflower inlaid in crossbanded mahogany panels, satinwood paterae, ebony and maple banding. The top is inlaid with a conch shell made from satinwood in a...
view details
Occasional Table
I made this Modern Occasional Table for one of my wife's adult students named Ryoko. I combined African Mahogany, Phillipine mahogany and Walnut.
view details
Mission Style Mahogany Dining Room Chairs
1 commentMission style mahogany dining room chairs. Mortise and tenon joinery with Leigh FMT. Based off of a design from FWW. Five coats of General's Arm-R-Seal.
view details
Mahogany Entry Door
2 commentsRound-top mahogany entry door with leaded-glass speakeasy hatch.
view details
Cutting Gauge and Bowsaw
The gauge is based on Dean Jansa's copy of one in the Seaton tool chest. The design was a pin marking gauge, but I decided to make a cutting gauge after seeing how smoothly they work. The bowsaw is...
view details
Mahogany Bonsai Stand
1 commentI designed this based on traditional Japanese bonsai stand designs. The top is solid quarter sawn mahogany with a mitered edge. The edge seam is hidden in a 1/8" square groove set in 3/4" from the...
view details
Mahogany Cabinet
2 commentsMahogany cabinet with pillowed sides. Makore base, Maple interior. There is a hidden box that is concealed in the top of the cabinet. 15" square at the base, 11" at the top, 39"...
view details
"Zinman" Desk
Thsi desk is made of african mahogany and ash lumber. Angled drawer banks anchor the swirling grain top,complete with a tori gate back trim. The walnut pulls add an accent and the oil finish is just...
view details
Restrained
5 commentsThis is an artwork using an old hand drill. It is incased in layers of plywood with mahogony venier on top and mahogony for the base. It is about the economy and people not having enough work or...
view details
daughter's birthday gift
2 commentsThis is a birthday wish from my daughter for something "dad made" Maple onlays are by Osborne Wood Products,upholstery by "Solutions",Birmingham Ala. Upholstery is all leather All wood is...
view details
An application error was encountered.
Severity: Warning
Message: file_get_contents(http://custommade.com/feeds/xml/?keyword=wood&count=4&imgsize=150) [function.file-get-contents]: failed to open stream: HTTP request failed! HTTP/1.1 404 NOT FOUND
Filename: libraries/Module.php
Line Number: 1954
ArrayWelcome to Fine Woodworking's Readers Gallery,
an online photo community where woodworkers like you can share photos of all your woodworking projects. Log in or register now to create your public profile, share photos, and comment on other photos.
Check out our brand-new SHOP GALLERY and JIGS GALLERY. Get inspired and then post pictures of your own work.
CURRENT GALLERY CHALLENGES:
Show Us Your Drawers
Got Jigs? Tip Top Tables Scraptacular Holiday Gift 2009 Cure for the Common Cabinet
Classical Style
Wood Turning Projects
Creative Bookcases
Build Outside the Box
Tool Chests and Cabinets
Built-In Furniture
Exposed Joinery
Reclaimed Lumber Projects
Holiday Gifts 2008
HOW TO LOGIN:
Step One: Create Your Profile or Login
Step Two: Post Pictures of your Furniture or Shop or Jigs.
Step Three: View Your Page
Join Woodworkers Like You
271669 woodworkers have joined Fine Woodworking. Create your profile and join the Fine Woodworking community!
Create your profile now!



