Reader's Gallery
Post your project Subscribe to RSS feed
Collaboration #1 - Treasure Chest
2 commentsAlder cabinet with coopered door. Padauk drawer fronts. Danish oil and paste wax finish. Ceramic sculpture insert in door by Tom Kerrigan.
view details
Kaidan Dansu
8 commentsJapanese chests were sometimes made as stairs to a loft, a Kaidan Dansu. This one is 80" tall and was constructed of wood from a soft maple tree that fell in my yard. Spalting is shown on the...
view details
shaker inspired dresser
5 commentsShaker inspired dresser with door. Made from yellow birch. It will be used for a change table for my daughter after she is born! All techniques used to build the piece were taken...
view details
Bloodwood, Maple and Cherry Coffee Table
This coffee table is made of bloodwood, cherry and eastern maple. the drawer was handcut.
view details
Magazine Box Cabinet
1 commentThe cabinet holds 21 magazine boxes that are sized to hold two years of your favorite woodworking magazine. The cabinet is maple with handcut dovetails. The magazine boxes are 3/16" thick...
view details
chippendale lowboy
3 commentsThis is a project that came from Frank Gottshalls: "Making Furniture Masterpieces". It took me 6 months to make and is made from rough sawn oak that I dried and planed. The legs feet front rail...
view details
Hickory key cabinet
This is a key cabinet requested by my wife that I made from a couple of scrap doors left over from when the previous owner of our house had the cabinets installed. I cut them up and glued up some...
view details
Bow Front Chest with conforming top
1 commentThe Bow Front Chest was two years in the making, one year for my wife to decide what she wanted in the foyer, and another year to build on the weekends. The drawer fronts were much eaiser to...
view details
Bow Front Chest with conforming top
The Bow Front Chest was two years in the making, one year for my wife to decide what she wanted in the foyer, and another year to build on the weekends. The drawer fronts were much eaiser to...
view details
Jewel Cabinet
4 commentsThe bamboo base joins 32 points in curved and angled space. The case is a perfect golden rectangle (PHI) banded with an intersecting inlaid wave pattern in steam bent rock maple that mimics the...
view details
Bow Front Chest with conforming top
1 commentThe Bow Front Chest was two years in the making, one year for my wife to decide what she wanted in the foyer, and another year to build on the weekends. The drawer fronts were much eaiser to...
view details
Federal Gentleman's Dressing Table
1 commentVarious elements of the Federal Period are interpreted in this Gentleman’s Dressing Table of my own design. The reeded bobbin detail in the legs and the prominent shaded fan challenge...
view details
Piano Box
1 commentThis box came about as a commission to build something out of what little was left of an old family piano after it had been irreparably damaged. Unfortunately, the body of the piano couldn't be...
view details
Franz Karg inspired cupboard
When I started the woodwork, Franz Karg was one of my favorite designer. I made this cabinet out of NZ swamp, or salvaged, Kauri. I didn't have many tools then so I needed to simplify his extremely...
view details
Boston Bombe Chest
11 commentsThe chest's case sides and drawer fronts were hand shaped from a solid 12/4 board of African Mahogany, 24" wide and 12' long. Secondary parts are made of poplar, hard maple, aromatic...
view details
Narrow Wall Cabinet
5 commentsThis cabinet is made from chechen, also known as carribean rosewood though it is not a true rosewood. I made the drawers from cocobolo, cherry and the bottoms out of a piece of pistachio I...
view details
Oak Shop Stool
2 commentsThis project began when my dad (a GREAT craftsman) and I got into a friendly discussion on how small chair legs could be and still hold you. He said that "1 inch was way too small"nbsp...
view details
Bathroom cabinets
These are some cabinets I made for a neighbor to use in their bathroom. The wood is VG Douglas Fir. They are similar design to manufactured cabinets they found on the web except for some small...
view details
reclaimed pine nightstands
These nightstands were made from 12" pine boards taken from and old built in clost organizer. The legs/stiles are square pine spindles from a balcony railing we removed from our house.
view details
chest of drawers
Shaker chest of drawers made from yellow birch. My own design. with construction elements taken from many fww articles. The case features large (2 1/2") box joints, dovetail keyed...
view details
Beech Cabinet On Stand
3 commentsEver since i've seen Krenov's cabients on stands i've always wanted to build one of my own. And here it is, the cabinet is made of Beech and the stand is made of Red Oak. The front has 2 hand...
view details
Connecticut Highboy
1 commentInspiration from Eldred Wheeler, Norm Vandal and an article in Woodworkers Journal. 75 inches tall, primary wood cherry, secondary poplar. All dovetails hand cut, 158 in total.
view details
Greene and Greene styled wall storage unit
1 commentGreene and Greene styled wall storage unit in quartersawn oak with mahagony pulls and accents. 29H X 42W X 10 3/4 D Stain then glaze with laquer finish.
view details
Colonial Tool Cupboard
I felt in need of some practice to "tune-up" my hand tool skills. My planes were living in an old dresser - a constant pest to have to get in and out the old worn drawers and their protective...
view details
Correspondence Box
3 commentsThis piece came about after re-watching one of my favorite movies, "The Life Aquatic With Steve Zissou." There is a line at some point where Steve Zissou mentions to his wife Eleanor that they need...
view details
Queen Anne/William and Mary highboy
A combination of elements from 2 pieces that I saw in some books that I really liked: one a William and Mary highboy, and another, a Queen Anne highboy. Built from solid Pine, Poplar, and Birch...
view details
Cherry Treasure Box
After 25 years of not doing any woodworking, I decided to learn some hand-cut joinery and maybe do a few projects. Here's my first box. It's a "Cherry Treasure Box"...
view details
Cherry Hutch from Taunton's Plans
Cherry hutch made drom Taunton's plans. Made from figured cherry with drawers made from Maple. The glass is Seed glass from a stained glass shop. Hardware is Victorian and...
view details
Sheraton Side Tables in Mahogany
2 commentsI wanted to try my hands on turning. This project was a result of that. The eight legs on these tables are the only eight pieces of wood I have ever mounted on a lathe. I also used the...
view details
Switchback bookcase
15 commentsContemporary design with traditional (albeit routed) dovetail joinery. I've never been a fan of adjustable shelving, which was the genesis for a fixed shelf case that could...
view details
pagoda cedar chest
1 commentI spent some time in asia and love the asian look. The top is hand sculpted cherry and usually has a set of three Samurai swords setting in a rack on the top. The drawers are dovetailed and slide on...
view details
Welcome to Fine Woodworking's Readers Gallery, an online photo community where woodworkers like you can share photos of all your woodworking projects. Log in or register now to create your public profile, share photos, and comment on other photos.
CURRENT GALLERY CONTESTS:CHECK BACK SHORTLY GALLERY CONTESTS ARCHIVE:
Holiday Gift 2009 Cure for the Common Cabinet
Classical Style
Wood Turning Projects
Creative Bookcases
Build Outside the Box
Tool Chests and Cabinets
Built-In Furniture
Exposed Joinery
Reclaimed Lumber Projects
Holiday Gifts 2008
HOW TO LOGIN:
Step One: Create Your Profile or Login
Step Two: Post a Project
Step Three: View Your Page
Join Woodworkers Like You
99125 woodworkers have joined Fine Woodworking. Create your profile and join the Fine Woodworking community!
Create your profile now!


