Reader's Gallery

showing 321 - 352 of 542 posts matching cabinet [X]
First < Previous 9 10 11 12 13 Next > Last

Sort By:

Twenty Foot Knee-wall Cabinet

AHW, member | June 17th, 20091 comment

Five foot by twenty foot knee-wall cabinet. Includes four large file drawers, panel door shelving units, plus large pull out storage compartments along the bottom of cabinets for easy access. Also...

view details

Cooper Entertainment Center

toddclippinger, member | June 17th, 20095 comments

This entertainment center was designed and built for the "Cooper House" that my brother and i built. The entertainment center is 9'h x 16'w and is made of curly maple, curly cherry, curly maple...

view details

Built-in book shelves and cabinets

geobcon, member | June 17th, 2009

This project was built in 3 sections because of limited shop space. It was dry assembled in my family room to insure correct alignment and then assembled in the final location and painted. Framing is...

view details

My Neander Haven

garyzim, member | June 16th, 200924 comments

A little over 7 1/2 months in the making and is my most labor intensive project as a weekend woodworking warrior. This is my labor of love as my Neader Haven has 48 drawers that are all hand cut...

view details

Basement Entertainment Center

Vern P., member | June 14th, 20097 comments

This project required me to solve several problems. These included a part of the concrete foundation extending almost 30" into the room on the left side, overhead duct work, fireplace, a 26"...

view details

chimney cupboard

studioso, member | June 11th, 20093 comments

Hello, this is my first piece of furniture. it's a small cupboard that I designed to be used as a jewish "aaron hakodes", or "holy ark". this is a cabinet -usually placed in a sinagogue- in which we...

view details

Family Room

qcwood, member | June 10th, 2009

Family Room: Entertainment Center, Coffee Table, Corner Table, 3 Walnut tops, 2 Valences, all made from Sapele solids and Sapele plywood, Walnut, Wenge, Cherry, Satinwood, Tiger Maple, Zebrawood...

view details

Spalted Maple and Walnut Tool Cabinet

rollo1, member | June 9th, 20096 comments

I built this tool cabinet for my hand tools, so it seemed appropriate to maximize my use of hand tools. The drawer and frame dovetails are all cut with saw and chisel, and all surfaces are finished...

view details

Quilters Cabinet

vestalr, member | June 7th, 20091 comment

With so much material for quilting laying around a place was needed to Store it. This was the design used just for that. Just a simple hanging cabinet.

view details

White oak bookcases/entertainment center

GrosseDesign, member | June 7th, 2009

I was lucky to be involved at the beginning in designing all details of this house. I started by designing window and door casings, then I designed and built the mantle, then the wainscoting in...

view details

Painted bookcase

GrosseDesign, member | June 7th, 20091 comment

These bookcases are painted poplar with stained oak counters to match the oak flooring. The tops have arched openings to reflect other arch details in the house. The two end sections of shelves are...

view details

medicine cabinet

GrosseDesign, member | June 7th, 2009

I built this medicine cabinet of pine with an antique whitewash finish and coated it with several layers of polyurethane. There is lighting behind the crown molding on the wall making it stand out to...

view details

Bow front cabinet

GrosseDesign, member | June 7th, 20092 comments

The sink cabinet is made with solid maple face frame and doors and cherry veneer panels. The counter top is concrete stained black and formed in place. The center is maple veneer over bent plywood...

view details

Daughter's Room

DaveBalto, member | June 5th, 2009

Built in cabinets and window seat. Window seat has drawers. Made of birch plywood and poplar. There is a bridge between the upper shelves with lights. Doors are raised panel...

view details

Wall mounted hand tool cabinet

Dominic_Greco, member | June 4th, 20092 comments

Here is a tool cabinet I designed using AutoCad/Solid Edge and built back in August of 2008. It's made from Oak Plywood trimmed with Cherry. The carcasss has mitered corners which in turn have walnut...

view details

Designing With Grain

BetsyE, member | June 4th, 20094 comments

The artful use of grain patterns can enhance the design and functionality of a piece of furniture.

view details

Building Our First Built-Ins

sjdehner, member | June 4th, 2009

We are in our thirties and just recently finished building our first house. Having moved from Washington state to a small town along the Maine coast we worked to build a house that settled...

view details

Custom built-in window wall

wooddood, member | June 3rd, 2009

This unit was designed to fit between 2 walls and frame a window. The center section is bowfront and is veneered with figured bubinga. The drawers below the window are lateral files. The...

view details

Bowfront built-in cbinet

wooddood, member | June 3rd, 20091 comment

This cabinet was built to fit into an existing closet space that had been gutted. There is a slight bowfront to the entire unit which required several curved forms to laminate the drawer fronts and...

view details

Cherry Built-In Bookshelves and Cabinets

MPC1982, member | June 3rd, 2009

Cherry Built-In Bookshelves and Cabinets

view details

Finish Carpenter's Dream Bench/Cabinet

bob123456789, member | June 3rd, 20096 comments

Miter saw stand with fold up sides made of pine & finished with Varathane. Swivel casters for moving, tools are stored in 2 tool boxes that get attached to the fold up side wings, the tool boxes...

view details

surrounded window seat

captphilb, member | June 3rd, 2009

Daughter-in-law's window seat surroundedby bookcases,storage draws and cabinets

view details

Hanging Hand Tool Cabinet

iccs, member | June 3rd, 20092 comments

All joinery and wood cut by hand tools, cobbled together from ideas of other's cabinets. Carcass joinery are hand cut thru dovetails, the drawers are half blind dovetails.

view details

Butternut Kitchen

johnwatters, member | June 3rd, 20091 comment

Happening upon a stack of rough-cut, air dried Butternut in Vermont, I took it home to Virginia to remodel and redesign my kitchen. Cabinet boxes of white flakeboard laminate with natural...

view details

Built in TV Cabinet

evodawg, member | June 3rd, 2009

Built this in the Master Bedroom to fill a Niche. Its 8' across and built in 2 sections, TV part and shelf part. Then put together and face framed.

view details

Built-in wardrobe

finelineWoodworking, member | June 3rd, 20091 comment

This custom cabinet features his and hers sides with hanging storage and pull out tray drawers as well as tgraditional chest of drawers. The center section is "bumped-out" and is set on a red...

view details

Rotating 8- Gun Carousel - Gun Cabinet with Bobwhite Quail Taxidermy Scene

tkantz, member | June 2nd, 20094 comments

This Gun Cabinet includes a 8 Gun rotating Carousel, with locked storage and a unique "natural" wildlife scene I created using 5 -Bobwhite Quail on the bottom section of the gun cabinet...

view details

Family room built-in cabinets, bookcases, and mantel surround

RonRocheleau, member | May 30th, 20091 comment

I finished this project around the end of July 2007. I’d been working on this for about 4 months for an hour or two each night and when I had some free time on the weekends. There are six lower...

view details

Curio Cabinet from Shippping Crates and Skids

Rundle, member | May 27th, 20091 comment

This is a small cabinet approximately 3' tall and 6" x 5". It is a frame and panel construction. I salvaged the boards from various crates and skids I found in my travels as a truck...

view details

Wall Clock/Hidden Jewelry Box

Trob, member | May 27th, 20093 comments

My purpose was to design something unique and practical. The project is a wall clock with hidden compartments for jewelry, keepsakes, or collectibles.

view details

Tool Cabinet

toolchest, member | May 27th, 20092 comments

Got tired of looking for the small stuff. This wall hung cabinet is 44" wide x 46" tall x 11" deep. Made out of quarter sawn cherry and spalted maple. The inlaid butterflies are...

view details

Tool Cabinet

toolchest, member | May 27th, 2009

Plane Jane chest on chest tool cabinet. Made out of quarter sawn cherry with hand cut dovetails thruout the chest and drawers. Both chests are 5 ft long x 19 1/2" deep x 40" tall for the...

view details

showing 321 - 352 of 542 posts
First < Previous 9 10 11 12 13 Next > Last

An application error was encountered.

Severity: Warning

Message: file_get_contents(http://custommade.com/feeds/xml/?keyword=wood&count=4&imgsize=150) [function.file-get-contents]: failed to open stream: HTTP request failed! HTTP/1.1 404 NOT FOUND

Filename: libraries/Module.php

Line Number: 1954

Array

Welcome to Fine Woodworking's Readers Gallery,
an online photo community where woodworkers like you can share photos of all your woodworking projects. Log in or register now to create your public profile, share photos, and comment on other photos.

Check out our brand-new SHOP GALLERY and JIGS GALLERY. Get inspired and then post pictures of your own work.

CURRENT GALLERY CHALLENGES:
Show Us Your Drawers