Reader's Gallery
Post your project Subscribe to RSS feed
Table for 10 persons
1 commentThe board is spruce - one board. Width - 90/80sm , thickness - 8sm , lenght - 305sm. The foots are from hornbeam.
view details
Monkey on a Motorscooter
1 commentI created this for my sister who collects stuffed monkeys.
view details
Gothic African Mahogany Entrance Door
This was an entrance door created for a historic Denver square from 1905 that used the gothic arch accents when originally built. I used this project as my first 'real' piece created in a new shop...
view details
Ash Casket
3 commentsThis was a first. I was asked to build a casket for a man where I live. he said that he would supply the lumber from some trees he taken down a few years ago if I would make it. Just one catch he...
view details
_sqm.JPG)
Steamer Trunk's
2 commentsThese steamer trunks made with white oak, walnut banding, brass antique hardware and finished with a tung oil finish, were made for family members as Christmas gifts.
view details
Fireplace Mantle
This fireplace was inspired by clients photo found in a magazine. With alternate moldings and luck matching the main crown I managed to give a very similiar look to the original. While smaller in...
view details
Christmas Totem pole
This is a 12 sided tapered cone using only 1 sheet of 3/4" plywood. Rotating Totem solved our family need on how to display and have ready to fill with goodies over 40 stockings. All pegs are...
view details
Corner table toy box
My daughter wanted a place to stash my granddaughter's toys, but instead of a generic pine box with a lid, she asked for something formal that also would serve as a corner table in her...
view details
custom music stand
Made with cherry, waulnut and maple solid wood. In addiction also i used copper and n'2 penny for detail.
view details
Birch Bait Box
Made out of birch, based on a 1949 Popular Science plan for a "bait box". My wife has claimed the box for keepsakes and it will likely never go fishing. Building the wood tray mechanism and matching...
view details
Router Table and Fence
2 commentsDescription: Router table 32” x 24” mounted on a steel frame; Two glued layers of 5/8” MDF table top, surfaced with plastic laminate and a purchased router plate; table was...
view details
PEZ DISPLAY CABINET
2 commentsDescription: Frame cabinet 32”H x 24”W x 4”D; poplar frame with 1/4" oak back panel; acrylic shelves, viewing door and acrylic hinges and locking hasps; Five acrylic...
view details
Oak Chest
Chest made for a family member from Red Oak, has old style Iron hardware and sliding trays for items
view details
Letter Box
Letter Box made with Tiger Maple and Black Walnut for Gift at Charity Auction.
view details
microBootlegger
3 commentsI designed and built microBootlegger after seeing a photo of a a 1920's Gold Cup racing boat name "Baby Bootlegger". I liked the simple classic lines and thought I could adapt it to a tandem kayak or...
view details
Nymph Canoe
I designed Nymph as a modern take on the Rushton canoe Sairy Gamp. It is small and easy handle on and off the water
view details
French armorie
curly maple armorie/entertainment center. based on early French designs. carving designs taken from French carving books in my personel library
view details
Ash and Hickory turned Christmas trees
Ash and Hickory stock glued up into solid blocks approximately 7" x 7" X12" Base and tree topper star are Walnut, decorative circles simulating ornaments are burned into the wood.
view details
Chippendale chest
Made of mahogany this is a small chest I made for a Christmas gift for someone very dear to us. Hope she likes it.
view details
Hourglass Mountain Dulcimer
This is a 4 string Mountain Dulcimer in the hourglass design.This instrument was handcrafted from scratch in my home shop. It has a light clear coat of oil that is hand...
view details
Teardrop Mountain Dulcimer
This is a 4 string Mountain Dulcimer in the teardrop design.This instrument was handcrafted from scratch in my home shop. It has a light clear coat of oil that is hand...
view details
Quartersawn White Oak Picture Frame
Made from odds and ends from previous projects. No such thing as too small an off cut to be used for something. =)
view details
garden bench
bench is myrtlewood, with 4 coats of tung oil, 2 coats of spar varathane for weather.
view details
Sculptured Maloof Inspired Chair
3 commentsA Christmas gift for my son. This low back chair in bubinga is from an original design by Sam Maloof, with some modificaitons. I especially like the grain pattern. The chair...
view details
Bent Lamination Table
A bent lamination side table of Maple, Ebony and glass. Designed to sit between two black leather and chrome framed chairs. Finished in hand rubbed lacquer.
view details
Curly Maple Gift Box
Curly maple box with walnut top and spines. Designed for two card decks and score pads.
view details
Welcome to Fine Woodworking's Readers Gallery, an online photo community where woodworkers like you can share photos of all your woodworking projects. Log in or register now to create your public profile, share photos, and comment on other photos.
CURRENT GALLERY CONTESTS:CHECK BACK SHORTLY GALLERY CONTESTS ARCHIVE:
Holiday Gift 2009 Cure for the Common Cabinet
Classical Style
Wood Turning Projects
Creative Bookcases
Build Outside the Box
Tool Chests and Cabinets
Built-In Furniture
Exposed Joinery
Reclaimed Lumber Projects
Holiday Gifts 2008
HOW TO LOGIN:
Step One: Create Your Profile or Login
Step Two: Post a Project
Step Three: View Your Page
Join Woodworkers Like You
100424 woodworkers have joined Fine Woodworking. Create your profile and join the Fine Woodworking community!
Create your profile now!
