|
|
|
|
Reader's Gallery
Post your project Subscribe to RSS feed
Stacy's Hall table
I built this Black Walnut Hall table for my wife. Legs are curved on the outside corners and tapered on the inside. All material milled on my band sawmill.
view details
Shaker Sill Cupboard
Based on original from Watervliet NY community. Shown in Kassay's and Handberg's books. Details are faithful to the original piece, however I changed the proportions, height and drawer graduations to...
view details
Jasmin
2 comments'Jasmin' is a chest made to my new born baby girl. made of maple, with water based lacquer finish.
view details
Raoul
1 comment'Raul' is a wardrobe made for a child of a frind, and it is also my final project at my woodworking course. made of oak, with two component lacquer finish.
view details
Arts & Crafts Inspired Dining Table
2 commentsThis was my first dining table project and was, by far, the biggest I have done to date. I designed and built this table myself drawing inspriation from the Arts & Crafts movement and...
view details
Liquor Cabinet in White Oak
I wanted to build a cabinet that would hold all the usual fixings, apart from the Krenov-style cabinet I built a couple of years ago for the Single Malt collection (shown here as well). nbspI...
view details
__sqm.jpg)
From tree to picture frame
3 commentsI needed to make a piture frame for a painting of my dog Nita. I had looked at various pieces of wood in my pile but nothing took my fancy. Then I finally got round to cutting down a dead tree in my...
view details
Bathroom Cabinet
3 commentsThis frame and panel piece is made of cherry and incorporates Blue Saphire granite on its lower shelf, handmade art glass in its inset doors, and a mirror to highlight displayed objects.
view details
Brass Patination
Ammona used to apply a patina to brass accessories in my home (threshold plates for interior doorways).
view details
Geo -Matrix walnut media cabinet
3 commentsSolid black walnut media cabinet, the disign is achived laminating sappy walnut and cutting at different angles up to three generations. Handles are Bloodwood and Holly.
view details
Spice Box
6 commentsMy first attempt at inlay. I used dovetail joints for the case and drawers. I attached the feet with a base frame and the top with a molding frame. Made of curley maple and cherry. The inlayed tree...
view details
changing table
2 commentschanging table for grandson G&G design. Made so it can be a dresser or changing table.
view details
_sqm.jpg)
My first cutting boards
5 commentsI understand everyone has done cuting boards, but these are my first. I did the Walnut and Mahogany board first then did the checked one with Walnut, Cherry and Bocote using the CB design...
view details
Monument to the End of Time
1 commentSince according to the Myan Calander the end of the world is coming I thought I would do a sculpture about that event before it happens.
view details
Concrete Coffie Table
4 commentsThis is a coffie table I made for my step daughters as a house warming present. Legs were made from a shipping crate that was going to be thrown away. And of course the fleurs-de-lis represents the...
view details
Shoulder plane
The only wood I had available for this was a chunk of 8/4 white oak. Most annoyingly it was almost perfectly rift sawn, instead of quarter. Not to be deterred, I marked out the...
view details
Ash, Alumimun and Acrylic Stair Parts
The stair hand rail, ballasters caps and base plates are all solid ash and constructed with an internal nut and bolt system before the tight joint fasteners became popular. The vertical ballasters...
view details
Mahogany Office
The office was constructed of book matched mahogany veneered plywood. The applied moldings on the doors are solid mahogany. The arched curved paneled entrance way and arched desk area are...
view details
Inlayed table Top
This table top was constructed of mdf for the substrate with a top layer of veneer that consisted of 17 individual pieces of veneer all glue together then glued down to the mdf substrate. The 17...
view details
Mickey's Wall Unit # 8
The 2 upper main and 2 lower base speaker enclosures were design and built with the same details as the previous posted story, Mickey's Wall Unit # 7, explaining the construction method using the...
view details
Mickey's Wall Unit # 7
The multi layered soffit was constructed using 3/8" bending plywood. The outer or face layer of the 3 layered soffit is an accustically clear, pleated silky black fabric, having a sub layer of a 1...
view details
Mickey's Wall Unit # 6
The center channel speaker cover was constructed using 3 separate layers of 1/8" bending plywood. The thin layers of plywood were bent and glued using the black primed mdf side pieces...
view details
Mickey's Wall Unit # 5
The bar top was built using mdf. The bar base was built using 12 layers of 3/8" bending plywood all laminated together to make a 3" thick curved platform base to support the bar top and...
view details
Mickey's Wall Unit # 4
These artistic sculpted curves were constructed using 3/8" thick bending plywood. They are basically all vertical layers that are separate dby the horizontal bulk head layers to keep the curved...
view details
Mickey's Wall Unit # 3
Mickey's Wall Unit post #3. This is the stereo equipment pullout system that I hand sketched out in full scale drawings, gave to the metal fabricator where I had worked hand and hand...
view details
Mickey's Wall Unit # 2
Post #2 of Mickey's Wall Unit. My sincere apologies, descriptions and explanations will need to be edited at a later time. Looking through the pink lighted doorway is a white painted kitchen which I...
view details
Mickey's Wall Unit
1 commentThis wall unit and bar were constructed of maple plywood for the main boxes. Bending plywood for curved flat surfaces. Mdf for the compound curved surfaces which was laminated to 3" thick in...
view details
Curved Bar Cabinet
This bar cabinet is constructed of maple plywood for the main box. Bending plywood for the curved surfaces. Three small niche shelves with a frosted plexiglass curved backing plate with optional rear...
view details
Kindall Cabinet
You might say that the heart wood of the birch doors on this Kindall cabinet stole MY heart. The body of this tall, slender cabinet was build from some beautiful planks of walnut, and the...
view details
Cherry Recipe Box
Cherry / Koa Recipe Box. Commissioned wedding gift. The box is sized to hold 4x6 recipe cards; cherry with koa splines, lid band and linked rings. The piano wire dividers prevent the cards...
view details
|
|
Welcome to Fine Woodworking's Readers Gallery,
an online photo community where woodworkers like you can share photos of all your woodworking projects. Log in or register now to create your public profile, share photos, and comment on other photos.
Check out our brand-new SHOP GALLERY and JIGS GALLERY. Get inspired and then post pictures of your own work.
CURRENT GALLERY CHALLENGES:
Show Us Your Drawers
Got Jigs? Tip Top Tables Scraptacular Holiday Gift 2009 Cure for the Common Cabinet
Classical Style
Wood Turning Projects
Creative Bookcases
Build Outside the Box
Tool Chests and Cabinets
Built-In Furniture
Exposed Joinery
Reclaimed Lumber Projects
Holiday Gifts 2008
HOW TO LOGIN:
Step One: Create Your Profile or Login
Step Two: Post Pictures of your Furniture or Shop or Jigs.
Step Three: View Your Page
Join Woodworkers Like You
282580 woodworkers have joined Fine Woodworking. Create your profile and join the Fine Woodworking community!
Create your profile now!
